linux-kernel - [PATCH v2 2/3] remoteproc: Add prepare/unprepare callbacks

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190729183109.18283-2-paul@crapouillou.net>
Date:   Mon, 29 Jul 2019 14:31:08 -0400
From:   Paul Cercueil <paul@...pouillou.net>
To:     Ohad Ben-Cohen <ohad@...ery.com>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     Paul Burton <paul.burton@...s.com>, od@...c.me,
        linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v2 2/3] remoteproc: Add prepare/unprepare callbacks

The .prepare() callback is called before the firmware is loaded to
memory. This is useful for instance in the case where some setup is
required for the memory to be accessible.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---

Notes:
    v2: No change

 drivers/remoteproc/remoteproc_core.c | 16 +++++++++++++++-
 include/linux/remoteproc.h           |  4 ++++
 2 files changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3c5fbbbfb0f1..68faad3ef0c1 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1300,11 +1300,19 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	struct device *dev = &rproc->dev;
 	int ret;
 
+	if (rproc->ops->prepare) {
+		ret = rproc->ops->prepare(rproc);
+		if (ret) {
+			dev_err(dev, "Failed to prepare rproc: %d\n", ret);
+			return ret;
+		}
+	}
+
 	/* load the ELF segments to memory */
 	ret = rproc_load_segments(rproc, fw);
 	if (ret) {
 		dev_err(dev, "Failed to load program segments: %d\n", ret);
-		return ret;
+		goto unprepare_rproc;
 	}
 
 	/*
@@ -1355,6 +1363,9 @@ static int rproc_start(struct rproc *rproc, const struct firmware *fw)
 	rproc_unprepare_subdevices(rproc);
 reset_table_ptr:
 	rproc->table_ptr = rproc->cached_table;
+unprepare_rproc:
+	if (rproc->ops->unprepare)
+		rproc->ops->unprepare(rproc);
 
 	return ret;
 }
@@ -1484,6 +1495,9 @@ static int rproc_stop(struct rproc *rproc, bool crashed)
 
 	rproc->state = RPROC_OFFLINE;
 
+	if (rproc->ops->unprepare)
+		rproc->ops->unprepare(rproc);
+
 	dev_info(dev, "stopped remote processor %s\n", rproc->name);
 
 	return 0;
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 16ad66683ad0..be65c2a92c58 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -355,6 +355,8 @@ enum rsc_handling_status {
 
 /**
  * struct rproc_ops - platform-specific device handlers
+ * @prepare:	prepare the device for power up (before the firmware is loaded)
+ * @unprepare:	unprepare the device after it is stopped
  * @start:	power on the device and boot it
  * @stop:	power off the device
  * @kick:	kick a virtqueue (virtqueue id given as a parameter)
@@ -371,6 +373,8 @@ enum rsc_handling_status {
  * @get_boot_addr:	get boot address to entry point specified in firmware
  */
 struct rproc_ops {
+	int (*prepare)(struct rproc *rproc);
+	void (*unprepare)(struct rproc *rproc);
 	int (*start)(struct rproc *rproc);
 	int (*stop)(struct rproc *rproc);
 	void (*kick)(struct rproc *rproc, int vqid);
-- 
2.21.0.593.g511ec345e18