linux-kernel - Re: [PATCH] rtw88: pci: Use general byte arrays as the elements of RX ring

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190730093533.GC3174@redhat.com>
Date:   Tue, 30 Jul 2019 11:35:33 +0200
From:   Stanislaw Gruszka <sgruszka@...hat.com>
To:     Jian-Hong Pan <jian-hong@...lessm.com>
Cc:     Yan-Hsuan Chuang <yhchuang@...ltek.com>,
        Kalle Valo <kvalo@...eaurora.org>,
        "David S . Miller" <davem@...emloft.net>,
        David Laight <David.Laight@...lab.com>,
        linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux@...lessm.com,
        stable@...r.kernel.org
Subject: Re: [PATCH] rtw88: pci: Use general byte arrays as the elements of
 RX ring

On Thu, Jul 25, 2019 at 04:09:26PM +0800, Jian-Hong Pan wrote:
> Each skb as the element in RX ring was expected with sized buffer 8216
> (RTK_PCI_RX_BUF_SIZE) bytes. However, the skb buffer's true size is
> 16640 bytes for alignment after allocated, x86_64 for example. And, the

rtw88 advertise IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454, so maximum AMSDU
packet can be approximately 12kB. This might be accidental, but having
16kB skb's allow to handle such big AMSDUs. If you shrink buf size,
you can probably override memory after buffer end.

> difference will be enlarged 512 times (RTK_MAX_RX_DESC_NUM).
> To prevent that much wasted memory, this patch follows David's
> suggestion [1] and uses general buffer arrays, instead of skbs as the
> elements in RX ring.
> 
> [1] https://www.spinics.net/lists/linux-wireless/msg187870.html
> 
> Signed-off-by: Jian-Hong Pan <jian-hong@...lessm.com>
> Cc: <stable@...r.kernel.org>

This does not fix any serious problem, it actually most likely 
introduce memory corruption problem described above. Should not
be targeted to stable anyway.

> -			dev_kfree_skb_any(skb);
> +			devm_kfree(rtwdev->dev, buf);

For what this is needed? devm_ allocations are used exactly to avoid
manual freeing.

> +		len = pkt_stat.pkt_len + pkt_offset;
> +		skb = dev_alloc_skb(len);
> +		if (WARN_ONCE(!skb, "rx routine starvation\n"))
>  			goto next_rp;
>  
>  		/* put the DMA data including rx_desc from phy to new skb */
> -		skb_put_data(new, skb->data, new_len);
> +		skb_put_data(skb, rx_desc, len);

Coping big packets it quite inefficient. What drivers usually do is 
copy only for small packets and for big ones allocate new rx buf
(drop packet alloc if fail) and pas old buf to network stack via
skb_add_rx_frag(). See iwlmvm as example.

Stanislaw