lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190731154603.41797-21-steven.price@arm.com>
Date:   Wed, 31 Jul 2019 16:46:01 +0100
From:   Steven Price <steven.price@....com>
To:     linux-mm@...ck.org
Cc:     Steven Price <steven.price@....com>,
        Andy Lutomirski <luto@...nel.org>,
        Ard Biesheuvel <ard.biesheuvel@...aro.org>,
        Arnd Bergmann <arnd@...db.de>, Borislav Petkov <bp@...en8.de>,
        Catalin Marinas <catalin.marinas@....com>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Ingo Molnar <mingo@...hat.com>,
        James Morse <james.morse@....com>,
        Jérôme Glisse <jglisse@...hat.com>,
        Peter Zijlstra <peterz@...radead.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Will Deacon <will@...nel.org>, x86@...nel.org,
        "H. Peter Anvin" <hpa@...or.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Mark Rutland <Mark.Rutland@....com>,
        "Liang, Kan" <kan.liang@...ux.intel.com>,
        Andrew Morton <akpm@...ux-foundation.org>
Subject: [PATCH v10 20/22] x86: mm: Convert dump_pagetables to use walk_page_range

Make use of the new functionality in walk_page_range to remove the
arch page walking code and use the generic code to walk the page tables.

The effective permissions are passed down the chain using new fields
in struct pg_state.

The KASAN optimisation is implemented by including test_p?d callbacks
which can decide to skip an entire tree of entries

Signed-off-by: Steven Price <steven.price@....com>
---
 arch/x86/Kconfig              |   1 +
 arch/x86/Kconfig.debug        |  20 +--
 arch/x86/mm/Makefile          |   4 +-
 arch/x86/mm/dump_pagetables.c | 285 +++++++---------------------------
 4 files changed, 64 insertions(+), 246 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 222855cc0158..76beeec13c27 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -119,6 +119,7 @@ config X86
 	select GENERIC_IRQ_RESERVATION_MODE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PENDING_IRQ		if SMP
+	select GENERIC_PTDUMP
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 71c92db47c41..ca4ee374e685 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -62,26 +62,10 @@ config EARLY_PRINTK_USB_XDBC
 config MCSAFE_TEST
 	def_bool n
 
-config X86_PTDUMP_CORE
-	def_bool n
-
-config X86_PTDUMP
-	tristate "Export kernel pagetable layout to userspace via debugfs"
-	depends on DEBUG_KERNEL
-	select DEBUG_FS
-	select X86_PTDUMP_CORE
-	---help---
-	  Say Y here if you want to show the kernel pagetable layout in a
-	  debugfs file. This information is only useful for kernel developers
-	  who are working in architecture specific areas of the kernel.
-	  It is probably not a good idea to enable this feature in a production
-	  kernel.
-	  If in doubt, say "N"
-
 config EFI_PGT_DUMP
 	bool "Dump the EFI pagetable"
 	depends on EFI
-	select X86_PTDUMP_CORE
+	select PTDUMP_CORE
 	---help---
 	  Enable this if you want to dump the EFI page table before
 	  enabling virtual mode. This can be used to debug miscellaneous
@@ -90,7 +74,7 @@ config EFI_PGT_DUMP
 
 config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
-	select X86_PTDUMP_CORE
+	select PTDUMP_CORE
 	---help---
 	  Generate a warning if any W+X mappings are found at boot.
 
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 84373dc9b341..66cf0ea5c2be 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -28,8 +28,8 @@ obj-$(CONFIG_X86_PAT)		+= pat_rbtree.o
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_X86_PTDUMP_CORE)	+= dump_pagetables.o
-obj-$(CONFIG_X86_PTDUMP)	+= debug_pagetables.o
+obj-$(CONFIG_PTDUMP_CORE)	+= dump_pagetables.o
+obj-$(CONFIG_PTDUMP_DEBUGFS)	+= debug_pagetables.o
 
 obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
 
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 3632be89ec99..998c7f46763c 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -16,6 +16,7 @@
 #include <linux/seq_file.h>
 #include <linux/highmem.h>
 #include <linux/pci.h>
+#include <linux/ptdump.h>
 
 #include <asm/e820/types.h>
 #include <asm/pgtable.h>
@@ -26,11 +27,12 @@
  * when a "break" in the continuity is found.
  */
 struct pg_state {
+	struct ptdump_state ptdump;
 	int level;
-	pgprot_t current_prot;
+	pgprotval_t current_prot;
 	pgprotval_t effective_prot;
+	pgprotval_t prot_levels[5];
 	unsigned long start_address;
-	unsigned long current_address;
 	const struct addr_marker *marker;
 	unsigned long lines;
 	bool to_dmesg;
@@ -171,9 +173,8 @@ static struct addr_marker address_markers[] = {
 /*
  * Print a readable form of a pgprot_t to the seq_file
  */
-static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
+static void printk_prot(struct seq_file *m, pgprotval_t pr, int level, bool dmsg)
 {
-	pgprotval_t pr = pgprot_val(prot);
 	static const char * const level_name[] =
 		{ "cr3", "pgd", "p4d", "pud", "pmd", "pte" };
 
@@ -220,24 +221,11 @@ static void printk_prot(struct seq_file *m, pgprot_t prot, int level, bool dmsg)
 	pt_dump_cont_printf(m, dmsg, "%s\n", level_name[level]);
 }
 
-/*
- * On 64 bits, sign-extend the 48 bit address to 64 bit
- */
-static unsigned long normalize_addr(unsigned long u)
-{
-	int shift;
-	if (!IS_ENABLED(CONFIG_X86_64))
-		return u;
-
-	shift = 64 - (__VIRTUAL_MASK_SHIFT + 1);
-	return (signed long)(u << shift) >> shift;
-}
-
-static void note_wx(struct pg_state *st)
+static void note_wx(struct pg_state *st, unsigned long addr)
 {
 	unsigned long npages;
 
-	npages = (st->current_address - st->start_address) / PAGE_SIZE;
+	npages = (addr - st->start_address) / PAGE_SIZE;
 
 #ifdef CONFIG_PCI_BIOS
 	/*
@@ -245,7 +233,7 @@ static void note_wx(struct pg_state *st)
 	 * Inform about it, but avoid the warning.
 	 */
 	if (pcibios_enabled && st->start_address >= PAGE_OFFSET + BIOS_BEGIN &&
-	    st->current_address <= PAGE_OFFSET + BIOS_END) {
+	    addr <= PAGE_OFFSET + BIOS_END) {
 		pr_warn_once("x86/mm: PCI BIOS W+X mapping %lu pages\n", npages);
 		return;
 	}
@@ -257,25 +245,44 @@ static void note_wx(struct pg_state *st)
 		  (void *)st->start_address);
 }
 
+static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
+{
+	return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
+	       ((prot1 | prot2) & _PAGE_NX);
+}
+
 /*
  * This function gets called on a break in a continuous series
  * of PTE entries; the next one is different so we need to
  * print what we collected so far.
  */
-static void note_page(struct pg_state *st, pgprot_t new_prot,
-		      pgprotval_t new_eff, int level)
+static void note_page(struct ptdump_state *pt_st, unsigned long addr, int level,
+		      unsigned long val)
 {
-	pgprotval_t prot, cur, eff;
+	struct pg_state *st = container_of(pt_st, struct pg_state, ptdump);
+	pgprotval_t new_prot, new_eff;
+	pgprotval_t cur, eff;
 	static const char units[] = "BKMGTPE";
 	struct seq_file *m = st->seq;
 
+	new_prot = val & PTE_FLAGS_MASK;
+
+	if (level > 1) {
+		new_eff = effective_prot(st->prot_levels[level - 2],
+					 new_prot);
+	} else {
+		new_eff = new_prot;
+	}
+
+	if (level > 0)
+		st->prot_levels[level-1] = new_eff;
+
 	/*
 	 * If we have a "break" in the series, we need to flush the state that
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot);
-	cur = pgprot_val(st->current_prot);
+	cur = st->current_prot;
 	eff = st->effective_prot;
 
 	if (!st->level) {
@@ -287,14 +294,14 @@ static void note_page(struct pg_state *st, pgprot_t new_prot,
 		st->lines = 0;
 		pt_dump_seq_printf(m, st->to_dmesg, "---[ %s ]---\n",
 				   st->marker->name);
-	} else if (prot != cur || new_eff != eff || level != st->level ||
-		   st->current_address >= st->marker[1].start_address) {
+	} else if (new_prot != cur || new_eff != eff || level != st->level ||
+		   addr >= st->marker[1].start_address) {
 		const char *unit = units;
 		unsigned long delta;
 		int width = sizeof(unsigned long) * 2;
 
 		if (st->check_wx && (eff & _PAGE_RW) && !(eff & _PAGE_NX))
-			note_wx(st);
+			note_wx(st, addr);
 
 		/*
 		 * Now print the actual finished series
@@ -304,9 +311,9 @@ static void note_page(struct pg_state *st, pgprot_t new_prot,
 			pt_dump_seq_printf(m, st->to_dmesg,
 					   "0x%0*lx-0x%0*lx   ",
 					   width, st->start_address,
-					   width, st->current_address);
+					   width, addr);
 
-			delta = st->current_address - st->start_address;
+			delta = addr - st->start_address;
 			while (!(delta & 1023) && unit[1]) {
 				delta >>= 10;
 				unit++;
@@ -323,7 +330,7 @@ static void note_page(struct pg_state *st, pgprot_t new_prot,
 		 * such as the start of vmalloc space etc.
 		 * This helps in the interpretation.
 		 */
-		if (st->current_address >= st->marker[1].start_address) {
+		if (addr >= st->marker[1].start_address) {
 			if (st->marker->max_lines &&
 			    st->lines > st->marker->max_lines) {
 				unsigned long nskip =
@@ -339,217 +346,43 @@ static void note_page(struct pg_state *st, pgprot_t new_prot,
 					   st->marker->name);
 		}
 
-		st->start_address = st->current_address;
+		st->start_address = addr;
 		st->current_prot = new_prot;
 		st->effective_prot = new_eff;
 		st->level = level;
 	}
 }
 
-static inline pgprotval_t effective_prot(pgprotval_t prot1, pgprotval_t prot2)
-{
-	return (prot1 & prot2 & (_PAGE_USER | _PAGE_RW)) |
-	       ((prot1 | prot2) & _PAGE_NX);
-}
-
-static void walk_pte_level(struct pg_state *st, pmd_t addr, pgprotval_t eff_in,
-			   unsigned long P)
-{
-	int i;
-	pte_t *pte;
-	pgprotval_t prot, eff;
-
-	for (i = 0; i < PTRS_PER_PTE; i++) {
-		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
-		pte = pte_offset_map(&addr, st->current_address);
-		prot = pte_flags(*pte);
-		eff = effective_prot(eff_in, prot);
-		note_page(st, __pgprot(prot), eff, 5);
-		pte_unmap(pte);
-	}
-}
-#ifdef CONFIG_KASAN
-
-/*
- * This is an optimization for KASAN=y case. Since all kasan page tables
- * eventually point to the kasan_early_shadow_page we could call note_page()
- * right away without walking through lower level page tables. This saves
- * us dozens of seconds (minutes for 5-level config) while checking for
- * W+X mapping or reading kernel_page_tables debugfs file.
- */
-static inline bool kasan_page_table(struct pg_state *st, void *pt)
-{
-	if (__pa(pt) == __pa(kasan_early_shadow_pmd) ||
-	    (pgtable_l5_enabled() &&
-			__pa(pt) == __pa(kasan_early_shadow_p4d)) ||
-	    __pa(pt) == __pa(kasan_early_shadow_pud)) {
-		pgprotval_t prot = pte_flags(kasan_early_shadow_pte[0]);
-		note_page(st, __pgprot(prot), 0, 5);
-		return true;
-	}
-	return false;
-}
-#else
-static inline bool kasan_page_table(struct pg_state *st, void *pt)
-{
-	return false;
-}
-#endif
-
-#if PTRS_PER_PMD > 1
-
-static void walk_pmd_level(struct pg_state *st, pud_t addr,
-			   pgprotval_t eff_in, unsigned long P)
-{
-	int i;
-	pmd_t *start, *pmd_start;
-	pgprotval_t prot, eff;
-
-	pmd_start = start = (pmd_t *)pud_page_vaddr(addr);
-	for (i = 0; i < PTRS_PER_PMD; i++) {
-		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
-		if (!pmd_none(*start)) {
-			prot = pmd_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (pmd_large(*start) || !pmd_present(*start)) {
-				note_page(st, __pgprot(prot), eff, 4);
-			} else if (!kasan_page_table(st, pmd_start)) {
-				walk_pte_level(st, *start, eff,
-					       P + i * PMD_LEVEL_MULT);
-			}
-		} else
-			note_page(st, __pgprot(0), 0, 4);
-		start++;
-	}
-}
-
-#else
-#define walk_pmd_level(s,a,e,p) walk_pte_level(s,__pmd(pud_val(a)),e,p)
-#define pud_large(a) pmd_large(__pmd(pud_val(a)))
-#define pud_none(a)  pmd_none(__pmd(pud_val(a)))
-#endif
-
-#if PTRS_PER_PUD > 1
-
-static void walk_pud_level(struct pg_state *st, p4d_t addr, pgprotval_t eff_in,
-			   unsigned long P)
-{
-	int i;
-	pud_t *start, *pud_start;
-	pgprotval_t prot, eff;
-
-	pud_start = start = (pud_t *)p4d_page_vaddr(addr);
-
-	for (i = 0; i < PTRS_PER_PUD; i++) {
-		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
-		if (!pud_none(*start)) {
-			prot = pud_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (pud_large(*start) || !pud_present(*start)) {
-				note_page(st, __pgprot(prot), eff, 3);
-			} else if (!kasan_page_table(st, pud_start)) {
-				walk_pmd_level(st, *start, eff,
-					       P + i * PUD_LEVEL_MULT);
-			}
-		} else
-			note_page(st, __pgprot(0), 0, 3);
-
-		start++;
-	}
-}
-
-#else
-#define walk_pud_level(s,a,e,p) walk_pmd_level(s,__pud(p4d_val(a)),e,p)
-#define p4d_large(a) pud_large(__pud(p4d_val(a)))
-#define p4d_none(a)  pud_none(__pud(p4d_val(a)))
-#endif
-
-static void walk_p4d_level(struct pg_state *st, pgd_t addr, pgprotval_t eff_in,
-			   unsigned long P)
-{
-	int i;
-	p4d_t *start, *p4d_start;
-	pgprotval_t prot, eff;
-
-	if (PTRS_PER_P4D == 1)
-		return walk_pud_level(st, __p4d(pgd_val(addr)), eff_in, P);
-
-	p4d_start = start = (p4d_t *)pgd_page_vaddr(addr);
-
-	for (i = 0; i < PTRS_PER_P4D; i++) {
-		st->current_address = normalize_addr(P + i * P4D_LEVEL_MULT);
-		if (!p4d_none(*start)) {
-			prot = p4d_flags(*start);
-			eff = effective_prot(eff_in, prot);
-			if (p4d_large(*start) || !p4d_present(*start)) {
-				note_page(st, __pgprot(prot), eff, 2);
-			} else if (!kasan_page_table(st, p4d_start)) {
-				walk_pud_level(st, *start, eff,
-					       P + i * P4D_LEVEL_MULT);
-			}
-		} else
-			note_page(st, __pgprot(0), 0, 2);
-
-		start++;
-	}
-}
+static const struct ptdump_range ptdump_ranges[] = {
+#ifdef CONFIG_X86_64
 
-#define pgd_large(a) (pgtable_l5_enabled() ? pgd_large(a) : p4d_large(__p4d(pgd_val(a))))
-#define pgd_none(a)  (pgtable_l5_enabled() ? pgd_none(a) : p4d_none(__p4d(pgd_val(a))))
+#define normalize_addr_shift (64 - (__VIRTUAL_MASK_SHIFT + 1))
+#define normalize_addr(u) ((signed long)(u << normalize_addr_shift) \
+				>> normalize_addr_shift)
 
-static inline bool is_hypervisor_range(int idx)
-{
-#ifdef CONFIG_X86_64
-	/*
-	 * A hole in the beginning of kernel address space reserved
-	 * for a hypervisor.
-	 */
-	return	(idx >= pgd_index(GUARD_HOLE_BASE_ADDR)) &&
-		(idx <  pgd_index(GUARD_HOLE_END_ADDR));
+	{0, PTRS_PER_PGD * PGD_LEVEL_MULT / 2},
+	{normalize_addr(PTRS_PER_PGD * PGD_LEVEL_MULT / 2), ~0UL},
 #else
-	return false;
+	{0, ~0UL},
 #endif
-}
+	{0, 0}
+};
 
 static void ptdump_walk_pgd_level_core(struct seq_file *m, struct mm_struct *mm,
 				       bool checkwx, bool dmesg)
 {
-	pgd_t *start = mm->pgd;
-	pgprotval_t prot, eff;
-	int i;
-	struct pg_state st = {};
-
-	st.to_dmesg = dmesg;
-	st.check_wx = checkwx;
-	st.seq = m;
-	if (checkwx)
-		st.wx_pages = 0;
-
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
-		if (!pgd_none(*start) && !is_hypervisor_range(i)) {
-			prot = pgd_flags(*start);
-#ifdef CONFIG_X86_PAE
-			eff = _PAGE_USER | _PAGE_RW;
-#else
-			eff = prot;
-#endif
-			if (pgd_large(*start) || !pgd_present(*start)) {
-				note_page(&st, __pgprot(prot), eff, 1);
-			} else {
-				walk_p4d_level(&st, *start, eff,
-					       i * PGD_LEVEL_MULT);
-			}
-		} else
-			note_page(&st, __pgprot(0), 0, 1);
+	struct pg_state st = {
+		.ptdump = {
+			.note_page	= note_page,
+			.range		= ptdump_ranges
+		},
+		.to_dmesg	= dmesg,
+		.check_wx	= checkwx,
+		.seq		= m
+	};
 
-		cond_resched();
-		start++;
-	}
+	ptdump_walk_pgd(&st.ptdump, mm);
 
-	/* Flush out the last page */
-	st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
-	note_page(&st, __pgprot(0), 0, 0);
 	if (!checkwx)
 		return;
 	if (st.wx_pages)
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ