lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 01 Aug 2019 01:31:08 +0200
From:   "Rafael J. Wysocki" <rjw@...ysocki.net>
To:     Linux ACPI <linux-acpi@...r.kernel.org>
Cc:     Linux PM <linux-pm@...r.kernel.org>,
        Linux PCI <linux-pci@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Bjorn Helgaas <helgaas@...nel.org>,
        Mario Limonciello <mario.limonciello@...l.com>,
        Kai-Heng Feng <kai.heng.feng@...onical.com>
Subject: [PATCH] ACPI: PM: Fix regression in acpi_device_set_power()

From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>

Commit f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.

Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.

Fixes: f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
Reported-by: Mario Limonciello <mario.limonciello@...l.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
 drivers/acpi/device_pm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Index: linux-pm/drivers/acpi/device_pm.c
===================================================================
--- linux-pm.orig/drivers/acpi/device_pm.c
+++ linux-pm/drivers/acpi/device_pm.c
@@ -236,13 +236,15 @@ int acpi_device_set_power(struct acpi_de
 		if (device->power.flags.power_resources)
 			result = acpi_power_transition(device, target_state);
 	} else {
+		int cur_state = device->power.state;
+
 		if (device->power.flags.power_resources) {
 			result = acpi_power_transition(device, ACPI_STATE_D0);
 			if (result)
 				goto end;
 		}
 
-		if (device->power.state == ACPI_STATE_D0) {
+		if (cur_state == ACPI_STATE_D0) {
 			int psc;
 
 			/* Nothing to do here if _PSC is not present. */



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ