lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190731082351.3157-4-h.feurstein@gmail.com>
Date:   Wed, 31 Jul 2019 10:23:48 +0200
From:   Hubert Feurstein <h.feurstein@...il.com>
To:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Hubert Feurstein <h.feurstein@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Rasmus Villemoes <rasmus.villemoes@...vas.dk>
Subject: [PATCH net-next v2 3/6] net: dsa: mv88e6xxx: introduce invalid_port_mask in mv88e6xxx_info

With this it is possible to mark certain chip ports as invalid. This is
required for example for the MV88E6220 (which is in general a MV88E6250
with 7 ports) but the ports 2-4 are not routed to pins.

If a user configures an invalid port, an error is returned.

Signed-off-by: Hubert Feurstein <h.feurstein@...il.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c |  9 +++++++++
 drivers/net/dsa/mv88e6xxx/chip.h | 10 ++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c8c176da0f1c..9fdcc21f0858 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2469,6 +2469,14 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
 
 	/* Setup Switch Port Registers */
 	for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
+		/* Prevent the use of an invalid port. */
+		if (mv88e6xxx_is_invalid_port(chip, i) &&
+		    !dsa_is_unused_port(ds, i)) {
+			dev_err(chip->dev, "port %d is invalid\n", i);
+			err = -EINVAL;
+			goto unlock;
+		}
+
 		if (dsa_is_unused_port(ds, i)) {
 			err = mv88e6xxx_port_set_state(chip, i,
 						       BR_STATE_DISABLED);
@@ -4270,6 +4278,7 @@ static const struct mv88e6xxx_info mv88e6xxx_table[] = {
 		 */
 		.num_ports = 7,
 		.num_internal_phys = 2,
+		.invalid_port_mask = BIT(2) | BIT(3) | BIT(4),
 		.max_vid = 4095,
 		.port_base_addr = 0x08,
 		.phy_base_addr = 0x00,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 2cc508a1cc32..359d258d7151 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -106,6 +106,11 @@ struct mv88e6xxx_info {
 	unsigned int g2_irqs;
 	bool pvt;
 
+	/* Mark certain ports as invalid. This is required for example for the
+	 * MV88E6220 (which is in general a MV88E6250 with 7 ports) but the
+	 * ports 2-4 are not routet to pins.
+	 */
+	unsigned int invalid_port_mask;
 	/* Multi-chip Addressing Mode.
 	 * Some chips respond to only 2 registers of its own SMI device address
 	 * when it is non-zero, and use indirect access to internal registers.
@@ -571,6 +576,11 @@ static inline unsigned int mv88e6xxx_num_gpio(struct mv88e6xxx_chip *chip)
 	return chip->info->num_gpio;
 }
 
+static inline bool mv88e6xxx_is_invalid_port(struct mv88e6xxx_chip *chip, int port)
+{
+	return (chip->info->invalid_port_mask & BIT(port)) != 0;
+}
+
 int mv88e6xxx_read(struct mv88e6xxx_chip *chip, int addr, int reg, u16 *val);
 int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val);
 int mv88e6xxx_update(struct mv88e6xxx_chip *chip, int addr, int reg,
-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ