linux-kernel - Re: [PATCH v7 11/20] cpufreq: tegra124: Add suspend and resume support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <98aae4b7-d95a-90ba-0d55-7512b3712f54@gmail.com>
Date:   Wed, 31 Jul 2019 13:23:37 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
        jason@...edaemon.net, marc.zyngier@....com,
        linus.walleij@...aro.org, stefan@...er.ch, mark.rutland@....com
Cc:     pdeschrijver@...dia.com, pgaikwad@...dia.com, sboyd@...nel.org,
        linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
        jckuo@...dia.com, josephl@...dia.com, talho@...dia.com,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        mperttunen@...dia.com, spatra@...dia.com, robh+dt@...nel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v7 11/20] cpufreq: tegra124: Add suspend and resume
 support

31.07.2019 3:20, Sowjanya Komatineni пишет:
> This patch adds suspend and resume pm ops for cpufreq driver.
> 
> PLLP is the safe clock source for CPU during system suspend and
> resume as PLLP rate is below the CPU Fmax at Vmin.
> 
> CPUFreq driver suspend switches the CPU clock source to PLLP and
> disables the DFLL clock.
> 
> During system resume, warmboot code powers up the CPU with PLLP
> clock source. So CPUFreq driver resume enabled DFLL clock and
> switches CPU back to DFLL clock source.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
>  drivers/cpufreq/tegra124-cpufreq.c | 60 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
> index 4f0c637b3b49..e979a3370988 100644
> --- a/drivers/cpufreq/tegra124-cpufreq.c
> +++ b/drivers/cpufreq/tegra124-cpufreq.c
> @@ -6,6 +6,7 @@
>  #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
>  
>  #include <linux/clk.h>
> +#include <linux/cpufreq.h>
>  #include <linux/err.h>
>  #include <linux/init.h>
>  #include <linux/kernel.h>
> @@ -128,8 +129,67 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> +static int __maybe_unused tegra124_cpufreq_suspend(struct device *dev)
> +{
> +	struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev);
> +	int err;
> +
> +	/*
> +	 * PLLP rate 408Mhz is below the CPU Fmax at Vmin and is safe to
> +	 * use during suspend and resume. So, switch the CPU clock source
> +	 * to PLLP and disable DFLL.
> +	 */
> +	err = clk_set_parent(priv->cpu_clk, priv->pllp_clk);
> +	if (err < 0) {
> +		dev_err(dev, "failed to reparent to PLLP: %d\n", err);
> +		return err;
> +	}
> +
> +	/* disable DFLL clock */
> +	clk_disable_unprepare(priv->dfll_clk);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused tegra124_cpufreq_resume(struct device *dev)
> +{
> +	struct tegra124_cpufreq_priv *priv = dev_get_drvdata(dev);
> +	int err;
> +
> +	/*
> +	 * Warmboot code powers up the CPU with PLLP clock source.
> +	 * Enable DFLL clock and switch CPU clock source back to DFLL.
> +	 */
> +	err = clk_prepare_enable(priv->dfll_clk);
> +	if (err < 0) {
> +		dev_err(dev, "failed to enable DFLL clock for CPU: %d\n", err);
> +		goto disable_cpufreq;
> +	}
> +
> +	err = clk_set_parent(priv->cpu_clk, priv->dfll_clk);
> +	if (err < 0) {
> +		dev_err(dev, "failed to reparent to DFLL clock: %d\n", err);
> +		goto disable_dfll;
> +	}
> +
> +	return 0;
> +
> +disable_dfll:
> +	clk_disable_unprepare(priv->dfll_clk);
> +disable_cpufreq:
> +	disable_cpufreq();
> +
> +	return err;
> +}
> +
> +static const struct dev_pm_ops tegra124_cpufreq_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(tegra124_cpufreq_suspend,
> +				tegra124_cpufreq_resume)
> +};
> +
>  static struct platform_driver tegra124_cpufreq_platdrv = {
>  	.driver.name	= "cpufreq-tegra124",
> +	.driver.pm	= &tegra124_cpufreq_pm_ops,
>  	.probe		= tegra124_cpufreq_probe,
>  };
>  
> 

Looks good,

Reviewed-by: Dmitry Osipenko <digetx@...il.com>