| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6714fb6a454e8085ada559b085db2557befdeeb4.camel@analog.com>
Date: Thu, 1 Aug 2019 11:43:28 +0000
From: "Togorean, Bogdan" <Bogdan.Togorean@...log.com>
To: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"narmstrong@...libre.com" <narmstrong@...libre.com>
CC: "Laurent.pinchart@...asonboard.com"
<Laurent.pinchart@...asonboard.com>,
"airlied@...ux.ie" <airlied@...ux.ie>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"sam@...nborg.org" <sam@...nborg.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"tglx@...utronix.de" <tglx@...utronix.de>,
"matt.redfearn@...nci.com" <matt.redfearn@...nci.com>,
"allison@...utok.net" <allison@...utok.net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>
Subject: Re: [PATCH 2/2] drm: bridge: adv7511: Add support for ADV7535
Hi Neil,
Thank you for review.
On Wed, 2019-07-31 at 09:42 +0200, Neil Armstrong wrote:
> [External]
>
> Hi Bogdan,
>
> On 30/07/2019 15:17, Bogdan Togorean wrote:
> > ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
> > 1080p@...z. v1p2 is fixed to 1.8V on ADV7535 but on ADV7533 can be
> > 1.2V
> > or 1.8V and is configurable in a register.
> >
> > Signed-off-by: Bogdan Togorean <bogdan.togorean@...log.com>
> > ---
> > drivers/gpu/drm/bridge/adv7511/adv7511.h | 2 ++
> > drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 31 +++++++++++++++-
> > ----
> > 2 files changed, 25 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > index 52b2adfdc877..702432615ec8 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> > @@ -91,6 +91,7 @@
> > #define ADV7511_REG_ARC_CTRL 0xdf
> > #define ADV7511_REG_CEC_I2C_ADDR 0xe1
> > #define ADV7511_REG_CEC_CTRL 0xe2
> > +#define ADV7511_REG_SUPPLY_SELECT 0xe4
> > #define ADV7511_REG_CHIP_ID_HIGH 0xf5
> > #define ADV7511_REG_CHIP_ID_LOW 0xf6
> >
> > @@ -320,6 +321,7 @@ struct adv7511_video_config {
> > enum adv7511_type {
> > ADV7511,
> > ADV7533,
> > + ADV7535,
> > };
> >
> > #define ADV7511_MAX_ADDRS 3
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index f6d2681f6927..941072decb73 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511
> > *adv7511)
> > */
> > regcache_sync(adv7511->regmap);
> >
> > - if (adv7511->type == ADV7533)
> > + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> > adv7533_dsi_power_on(adv7511);
> > adv7511->powered = true;
> > }
> > @@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511
> > *adv7511)
> > static void adv7511_power_off(struct adv7511 *adv7511)
> > {
> > __adv7511_power_off(adv7511);
> > - if (adv7511->type == ADV7533)
> > + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> > adv7533_dsi_power_off(adv7511);
> > adv7511->powered = false;
> > }
> > @@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511
> > *adv7511,
> > regmap_update_bits(adv7511->regmap, 0x17,
> > 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
> >
> > - if (adv7511->type == ADV7533)
> > + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> > adv7533_mode_set(adv7511, adj_mode);
> >
> > drm_mode_copy(&adv7511->curr_mode, adj_mode);
> > @@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct
> > drm_bridge *bridge)
> > &adv7511_connector_helper_funcs);
> > drm_connector_attach_encoder(&adv->connector, bridge->encoder);
> >
> > - if (adv->type == ADV7533)
> > + if (adv->type == ADV7533 || adv->type == ADV7535)
> > ret = adv7533_attach_dsi(adv);
> >
> > if (adv->i2c_main->irq)
> > @@ -952,7 +952,7 @@ static bool
> > adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
> > struct i2c_client *i2c = to_i2c_client(dev);
> > struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
> >
> > - if (adv7511->type == ADV7533)
> > + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> > reg -= ADV7533_REG_CEC_OFFSET;
> >
> > switch (reg) {
> > @@ -994,7 +994,7 @@ static int adv7511_init_cec_regmap(struct
> > adv7511 *adv)
> > goto err;
> > }
> >
> > - if (adv->type == ADV7533) {
> > + if (adv->type == ADV7533 || adv->type == ADV7535) {
> > ret = adv7533_patch_cec_registers(adv);
> > if (ret)
> > goto err;
> > @@ -1094,8 +1094,9 @@ static int adv7511_probe(struct i2c_client
> > *i2c, const struct i2c_device_id *id)
> > struct adv7511_link_config link_config;
> > struct adv7511 *adv7511;
> > struct device *dev = &i2c->dev;
> > + struct regulator *reg_v1p2;
> > unsigned int val;
> > - int ret;
> > + int ret, reg_v1p2_uV;
> >
> > if (!dev->of_node)
> > return -EINVAL;
> > @@ -1163,6 +1164,18 @@ static int adv7511_probe(struct i2c_client
> > *i2c, const struct i2c_device_id *id)
> > if (ret)
> > goto uninit_regulators;
> >
> > + if (adv7511->type == ADV7533) {
> > + ret = match_string(adv7533_supply_names, adv7511-
> > >num_supplies,
> > +
> > "v1p2");
> > + reg_v1p2 = adv7511->supplies[ret].consumer;
> > + reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
> > +
> > + if (reg_v1p2_uV == 1200000) {
> > + regmap_update_bits(adv7511->regmap,
> > + ADV7511_REG_SUPPLY_SELECT, 0x80, 0x80);
> > + }
> > + }
> > +
> > adv7511_packet_disable(adv7511, 0xffff);
> >
> > adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
> > @@ -1242,7 +1255,7 @@ static int adv7511_remove(struct i2c_client
> > *i2c)
> > {
> > struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
> >
> > - if (adv7511->type == ADV7533)
> > + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> > adv7533_detach_dsi(adv7511);
> > i2c_unregister_device(adv7511->i2c_cec);
> > if (adv7511->cec_clk)
> > @@ -1268,6 +1281,7 @@ static const struct i2c_device_id
> > adv7511_i2c_ids[] = {
> > { "adv7513", ADV7511 },
> > #ifdef CONFIG_DRM_I2C_ADV7533
> > { "adv7533", ADV7533 },
> > + { "adv7535", ADV7535 },
>
> Maybe you should add a new CONFIG_DRM_I2C_ADV7535 or update the
> current CONFIG_DRM_I2C_ADV7533 description.
I'll rename the config option as Laurent also suggested to
CONFIG_DRM_I2C_ADV753X and update its description.
>
> > #endif
> > { }
> > };
> > @@ -1279,6 +1293,7 @@ static const struct of_device_id
> > adv7511_of_ids[] = {
> > { .compatible = "adi,adv7513", .data = (void *)ADV7511 },
> > #ifdef CONFIG_DRM_I2C_ADV7533
> > { .compatible = "adi,adv7533", .data = (void *)ADV7533 },
> > + { .compatible = "adi,adv7535", .data = (void *)ADV7535 },
>
> Ditto
>
> I'm not a adv75xx expert but it looks sane.
>
> Neil
>
> > #endif
> > { }
> > };
> >
Powered by blists - more mailing lists