lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20190801195059.24005-3-mpelland@starry.com>
Date:   Thu,  1 Aug 2019 15:50:59 -0400
From:   Matt Pelland <mpelland@...rry.com>
To:     linux-kernel@...r.kernel.org
Cc:     kishon@...com, antoine.tenart@...tlin.com,
        linux-arm-kernel@...ts.infradead.org,
        Matt Pelland <mpelland@...rry.com>
Subject: [PATCH 2/4] phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT

The documentation for Marvell's cp110 phy refers to these
registers/register regions as DTL control, DTL frequency loop enable,
etc. This patch aligns the relevant code for these accordingly.

Signed-off-by: Matt Pelland <mpelland@...rry.com>
---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 22 ++++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index f7f8d2bfd641..f0c02e426da4 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -78,8 +78,8 @@
 #define MVEBU_COMPHY_TX_SLEW_RATE(n)		(0x974 + (n) * 0x1000)
 #define     MVEBU_COMPHY_TX_SLEW_RATE_EMPH(n)	((n) << 5)
 #define     MVEBU_COMPHY_TX_SLEW_RATE_SLC(n)	((n) << 10)
-#define MVEBU_COMPHY_DLT_CTRL(n)		(0x984 + (n) * 0x1000)
-#define     MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN	BIT(2)
+#define MVEBU_COMPHY_DTL_CTRL(n)		(0x984 + (n) * 0x1000)
+#define     MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN	BIT(2)
 #define MVEBU_COMPHY_FRAME_DETECT0(n)		(0xa14 + (n) * 0x1000)
 #define     MVEBU_COMPHY_FRAME_DETECT0_PATN(n)	((n) << 7)
 #define MVEBU_COMPHY_FRAME_DETECT3(n)		(0xa20 + (n) * 0x1000)
@@ -374,9 +374,9 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
 	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val &= ~MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val &= ~MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	regmap_read(priv->regmap, MVEBU_COMPHY_CONF1(lane->id), &val);
 	val &= ~MVEBU_COMPHY_CONF1_USB_PCIE;
@@ -407,9 +407,9 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
 	       MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val |= MVEBU_COMPHY_DLT_CTRL_DLT_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	val = readl(priv->base + MVEBU_COMPHY_SERDES_CFG2(lane->id));
 	val |= MVEBU_COMPHY_SERDES_CFG2_DFE_EN;
@@ -460,9 +460,9 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
 	       MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
 	writel(val, priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
 
-	val = readl(priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
-	val |= MVEBU_COMPHY_DLT_CTRL_DTL_FLOOP_EN;
-	writel(val, priv->base + MVEBU_COMPHY_DLT_CTRL(lane->id));
+	val = readl(priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
+	val |= MVEBU_COMPHY_DTL_CTRL_DTL_FLOOP_EN;
+	writel(val, priv->base + MVEBU_COMPHY_DTL_CTRL(lane->id));
 
 	/* Speed divider */
 	val = readl(priv->base + MVEBU_COMPHY_SPEED_DIV(lane->id));
-- 
2.21.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ