| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190802075854.ydrlufwvdxcjk7jj@rric.localdomain>
Date: Fri, 2 Aug 2019 09:58:55 +0200
From: Robert Richter <rric@...nel.org>
To: Robert Richter <rrichter@...vell.com>
Cc: Borislav Petkov <bp@...en8.de>, James Morse <james.morse@....com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Tony Luck <tony.luck@...el.com>,
"linux-edac@...r.kernel.org" <linux-edac@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 00/24] EDAC, mc, ghes: Fixes and updates to improve
memory error reporting
Hi all,
this is a friendly ping for review of this series.
Thanks,
-Robert
On 24.06.19 15:08:52, Robert Richter wrote:
> Current arm64 systems that use the ghes driver lack kernel support for
> a proper memory error reporting. Following issues are seen:
>
> * Error record shows insufficient data, such as "EDAC MC0: 1 CE
> unknown error on unknown label",
>
> * DMI DIMM labels are not decoded for error reporting,
>
> * No memory hierarchy known (NUMA topology),
>
> * No per layer reporting,
>
> * Significant differences to x86 error reports.
>
> This patch set addresses all the above involving a rework of the
> ghes_edac and edac_mc driver.
>
> Patch #1-#4: Fix of grain calculation in edac_mc.c (#1) and
> ghes_edac.c (#2) including unification of trace_mc_event() code (#3,
> #4).
>
> Patches #5-#12: General fixes and improvements of the ghes and mc
> drivers. Most of it is a rework of existing code without functional
> changes to improve, ease, cleanup and join common code. The changes
> are in preparation of and a requirment for the following patches that
> improve ghes error reports.
>
> Patches #13-#22: Improve error memory reporting of the ghes driver
> including:
>
> * support for legacy API (patch #12),
>
> * NUMA detection, one mc device per node (patches #13-#16),
>
> * support for DMI DIMM label information (patch #17),
>
> * per-layer reporting (patches #18-#20).
>
> Patch #23: Documentation updates.
>
> Patch #24: Disable legacy API for ARM64 ghes driver (optional, need to
> be ack'ed by James, I vote for not applying it).
>
> All changes should keep existing systems working as before. All
> systems that are using ghes will also benefit from the update. There
> is a fallback in the ghes driver that disables NUMA or enters a fake
> mode if some of the NUMA or DIMM information is inconsistent. So it
> should not break existing systems that provide broken firmware tables.
>
> The series has been tested on a Marvell/Cavium ThunderX2 system. Here
> some example logs and sysfs entries:
>
> Boot log of memory hierarchy and dimm detection:
>
> EDAC DEBUG: mem_info_setup: DIMM0: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x0038, label: N0 DIMM_A0
> EDAC DEBUG: mem_info_setup: DIMM1: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x0039, label: N0 DIMM_B0
> EDAC DEBUG: mem_info_setup: DIMM2: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003a, label: N0 DIMM_C0
> EDAC DEBUG: mem_info_setup: DIMM3: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003b, label: N0 DIMM_D0
> EDAC DEBUG: mem_info_setup: DIMM4: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003c, label: N0 DIMM_E0
> EDAC DEBUG: mem_info_setup: DIMM5: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003d, label: N0 DIMM_F0
> EDAC DEBUG: mem_info_setup: DIMM6: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003e, label: N0 DIMM_G0
> EDAC DEBUG: mem_info_setup: DIMM7: Found mem range [0x0000008800000000-0x0000009ffcffffff] on node 0, handle: 0x003f, label: N0 DIMM_H0
> EDAC DEBUG: mem_info_setup: DIMM8: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x004f, label: N1 DIMM_I0
> EDAC DEBUG: mem_info_setup: DIMM9: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0050, label: N1 DIMM_J0
> EDAC DEBUG: mem_info_setup: DIMM10: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0051, label: N1 DIMM_K0
> EDAC DEBUG: mem_info_setup: DIMM11: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0052, label: N1 DIMM_L0
> EDAC DEBUG: mem_info_setup: DIMM12: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0053, label: N1 DIMM_M0
> EDAC DEBUG: mem_info_setup: DIMM13: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0054, label: N1 DIMM_N0
> EDAC DEBUG: mem_info_setup: DIMM14: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0055, label: N1 DIMM_O0
> EDAC DEBUG: mem_info_setup: DIMM15: Found mem range [0x0000009ffd000000-0x000000bffcffffff] on node 1, handle: 0x0056, label: N1 DIMM_P0
>
> DIMM label entries in sysfs:
>
> # grep . /sys/devices/system/edac/mc/mc*/dimm*/dimm_label
> /sys/devices/system/edac/mc/mc0/dimm0/dimm_label:N0 DIMM_A0
> /sys/devices/system/edac/mc/mc0/dimm1/dimm_label:N0 DIMM_B0
> /sys/devices/system/edac/mc/mc0/dimm2/dimm_label:N0 DIMM_C0
> /sys/devices/system/edac/mc/mc0/dimm3/dimm_label:N0 DIMM_D0
> /sys/devices/system/edac/mc/mc0/dimm4/dimm_label:N0 DIMM_E0
> /sys/devices/system/edac/mc/mc0/dimm5/dimm_label:N0 DIMM_F0
> /sys/devices/system/edac/mc/mc0/dimm6/dimm_label:N0 DIMM_G0
> /sys/devices/system/edac/mc/mc0/dimm7/dimm_label:N0 DIMM_H0
> /sys/devices/system/edac/mc/mc1/dimm0/dimm_label:N1 DIMM_I0
> /sys/devices/system/edac/mc/mc1/dimm1/dimm_label:N1 DIMM_J0
> /sys/devices/system/edac/mc/mc1/dimm2/dimm_label:N1 DIMM_K0
> /sys/devices/system/edac/mc/mc1/dimm3/dimm_label:N1 DIMM_L0
> /sys/devices/system/edac/mc/mc1/dimm4/dimm_label:N1 DIMM_M0
> /sys/devices/system/edac/mc/mc1/dimm5/dimm_label:N1 DIMM_N0
> /sys/devices/system/edac/mc/mc1/dimm6/dimm_label:N1 DIMM_O0
> /sys/devices/system/edac/mc/mc1/dimm7/dimm_label:N1 DIMM_P0
>
> Memory error reports in the kernel log:
>
> {1}[Hardware Error]: Error 4, type: corrected
> {1}[Hardware Error]: section_type: memory error
> {1}[Hardware Error]: error_status: 0x0000000000000400
> {1}[Hardware Error]: physical_address: 0x000000bd0db44000
> {1}[Hardware Error]: node: 1 card: 3 module: 0 rank: 0 bank: 256 column: 10 bit_position: 16
> {1}[Hardware Error]: DIMM location: N1 DIMM_L0
> EDAC MC1: 1 CE ghes_mc on N1 DIMM_L0 (card:3 module:0 page:0xbd0db44 offset:0x0 grain:0 syndrome:0x0 - APEI location: node:1 card:3 module:0 rank:0 bank:256 col:10 bit_pos:16 handle:0x0052 status(0x0000000000000400): Storage error in DRAM memory)
>
> Error counters in sysfs (zero counters dropped):
>
> # find /sys/devices/system/edac/mc/ -name \*count | sort -V | xargs grep . | sed -e '/:0/d'
> /sys/devices/system/edac/mc/mc0/ce_count:5
> /sys/devices/system/edac/mc/mc0/csrow0/ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow0/ch0_ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow3/ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow3/ch0_ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow4/ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow4/ch0_ce_count:1
> /sys/devices/system/edac/mc/mc0/csrow6/ce_count:2
> /sys/devices/system/edac/mc/mc0/csrow6/ch0_ce_count:2
> /sys/devices/system/edac/mc/mc0/dimm0/dimm_ce_count:1
> /sys/devices/system/edac/mc/mc0/dimm3/dimm_ce_count:1
> /sys/devices/system/edac/mc/mc0/dimm4/dimm_ce_count:1
> /sys/devices/system/edac/mc/mc0/dimm6/dimm_ce_count:2
> /sys/devices/system/edac/mc/mc1/ce_count:4
> /sys/devices/system/edac/mc/mc1/csrow0/ce_count:1
> /sys/devices/system/edac/mc/mc1/csrow0/ch0_ce_count:1
> /sys/devices/system/edac/mc/mc1/csrow3/ce_count:1
> /sys/devices/system/edac/mc/mc1/csrow3/ch0_ce_count:1
> /sys/devices/system/edac/mc/mc1/csrow6/ce_count:2
> /sys/devices/system/edac/mc/mc1/csrow6/ch0_ce_count:2
> /sys/devices/system/edac/mc/mc1/dimm0/dimm_ce_count:1
> /sys/devices/system/edac/mc/mc1/dimm3/dimm_ce_count:1
> /sys/devices/system/edac/mc/mc1/dimm6/dimm_ce_count:2
>
>
> v2 updates:
>
> * rebased onto bp/for-next (b2572772d13e: EDAC: Make
> edac_debugfs_create_x*() return void),
>
> * added patches to fix grain calculation (put this at the beginning
> of the series to apply them separately),
>
> * modified sysfs init functions based (EDAC, mc: Fix and improve
> sysfs init functions) on Greg's fixes (f5d59da9663d EDAC/sysfs:
> Drop device references properly),
>
> * removed duplicate code for mem_info_setup*() by moving it to
> ghes_dimm_info_init(),
>
> * fix bisecting of series,
>
> * made mem_info static,
>
> * renamed function mci_add_dimm_info() to mem_info_prepare_mci(),
>
> * added patch to move struct member smbios_handle to struct
> ghes_dimm_info,
>
> * renamed ghes_mem_info.num_per_node[] to
> ghes_mem_info.dimms_per_node[],
>
> * removed unused mem_info.enable_numa,
>
> * removed unused mem_info.num_nodes,
>
> * fixed dimm counters after sysfs reset_counters.
>
>
> Robert Richter (24):
> EDAC, mc: Fix grain_bits calculation
> EDAC, ghes: Fix grain calculation
> EDAC, ghes: Remove pvt->detail_location string
> EDAC, ghes: Unify trace_mc_event() code with edac_mc driver
> EDAC, mc: Fix and improve sysfs init functions
> EDAC: Kill EDAC_DIMM_PTR() macro
> EDAC: Kill EDAC_DIMM_OFF() macro
> EDAC: Introduce mci_for_each_dimm() iterator
> EDAC, mc: Cleanup _edac_mc_free() code
> EDAC, mc: Remove per layer counters
> EDAC, mc: Rework edac_raw_mc_handle_error() to use struct dimm_info
> EDAC, ghes: Use standard kernel macros for page calculations
> EDAC, ghes: Add support for legacy API counters
> EDAC, ghes: Rework memory hierarchy detection
> EDAC, ghes: Extract numa node information for each dimm
> EDAC, ghes: Moving code around ghes_edac_register()
> EDAC, ghes: Create one memory controller device per node
> EDAC, ghes: Fill sysfs with the DMI DIMM label information
> EDAC, mc: Introduce edac_mc_alloc_by_dimm() for per dimm allocation
> EDAC, ghes: Identify dimm by node, card, module and handle
> EDAC, ghes: Enable per-layer reporting based on card/module
> EDAC, ghes: Move struct member smbios_handle to struct ghes_dimm_info
> EDAC, Documentation: Describe CPER module definition and DIMM ranks
> EDAC, ghes: Disable legacy API for ARM64
>
> Documentation/admin-guide/ras.rst | 31 +-
> drivers/edac/edac_mc.c | 385 ++++++++++---------
> drivers/edac/edac_mc.h | 33 +-
> drivers/edac/edac_mc_sysfs.c | 95 ++---
> drivers/edac/ghes_edac.c | 609 +++++++++++++++++++++++-------
> drivers/edac/i10nm_base.c | 3 +-
> drivers/edac/i3200_edac.c | 3 +-
> drivers/edac/i5000_edac.c | 5 +-
> drivers/edac/i5100_edac.c | 14 +-
> drivers/edac/i5400_edac.c | 4 +-
> drivers/edac/i7300_edac.c | 3 +-
> drivers/edac/i7core_edac.c | 3 +-
> drivers/edac/ie31200_edac.c | 7 +-
> drivers/edac/pnd2_edac.c | 4 +-
> drivers/edac/sb_edac.c | 2 +-
> drivers/edac/skx_base.c | 3 +-
> drivers/edac/ti_edac.c | 2 +-
> include/linux/edac.h | 141 ++++---
> 18 files changed, 842 insertions(+), 505 deletions(-)
>
> --
> 2.20.1
>
Powered by blists - more mailing lists