lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190802080014.GD5008@pendragon.ideasonboard.com>
Date:   Fri, 2 Aug 2019 11:00:14 +0300
From:   Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:     Fabrizio Castro <fabrizio.castro@...renesas.com>
Cc:     Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
        Jacopo Mondi <jacopo+renesas@...ndi.org>,
        Thierry Reding <thierry.reding@...il.com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Sam Ravnborg <sam@...nborg.org>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Simon Horman <horms@...ge.net.au>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Chris Paterson <Chris.Paterson2@...esas.com>,
        Biju Das <biju.das@...renesas.com>,
        linux-renesas-soc@...r.kernel.org
Subject: Re: [PATCH/RFC 03/12] dt-bindings: panel: lvds: Add dual-link LVDS
 display support

Hi Fabrizio,

Thank you for the patch.

On Fri, Aug 02, 2019 at 08:34:00AM +0100, Fabrizio Castro wrote:
> Dual-link LVDS displays have two ports, therefore document this
> with the bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
> ---
>  .../bindings/display/panel/panel-lvds.txt          | 91 ++++++++++++++++------
>  1 file changed, 67 insertions(+), 24 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> index 250850a..07795441 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.txt
> @@ -41,7 +41,8 @@ Required nodes:
>  
>  - panel-timing: See panel-common.txt.
>  - ports: See panel-common.txt. These bindings require a single port subnode
> -  corresponding to the panel LVDS input.
> +  (for a single link display) or two port subnodes (for a dual link display)
> +  corresponding to the panel LVDS input(s).

I think you should expand this a bit to explain what the ports
correspond to in the dual link mode.

>  LVDS data mappings are defined as follows.
> @@ -92,30 +93,72 @@ CTL3: 0
>  Example
>  -------
>  
> -panel {
> -	compatible = "mitsubishi,aa121td01", "panel-lvds";
> -
> -	width-mm = <261>;
> -	height-mm = <163>;
> -
> -	data-mapping = "jeida-24";
> -
> -	panel-timing {
> -		/* 1280x800 @60Hz */
> -		clock-frequency = <71000000>;
> -		hactive = <1280>;
> -		vactive = <800>;
> -		hsync-len = <70>;
> -		hfront-porch = <20>;
> -		hback-porch = <70>;
> -		vsync-len = <5>;
> -		vfront-porch = <3>;
> -		vback-porch = <15>;
> +Single port:
> +	panel {
> +		compatible = "mitsubishi,aa121td01", "panel-lvds";
> +
> +		width-mm = <261>;
> +		height-mm = <163>;
> +
> +		data-mapping = "jeida-24";
> +
> +		panel-timing {
> +			/* 1280x800 @60Hz */
> +			clock-frequency = <71000000>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hsync-len = <70>;
> +			hfront-porch = <20>;
> +			hback-porch = <70>;
> +			vsync-len = <5>;
> +			vfront-porch = <3>;
> +			vback-porch = <15>;
> +		};
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&lvds_encoder>;
> +			};
> +		};
>  	};
>  
> -	port {
> -		panel_in: endpoint {
> -			remote-endpoint = <&lvds_encoder>;
> +Two ports:
> +	panel {
> +		compatible = "advantech,idk-2121wr", "panel-lvds";
> +
> +		width-mm = <476>;
> +		height-mm = <268>;
> +
> +		data-mapping = "vesa-24";
> +
> +		panel-timing {
> +			clock-frequency = <148500000>;
> +			hactive = <1920>;
> +			vactive = <1080>;
> +			hsync-len = <44>;
> +			hfront-porch = <88>;
> +			hback-porch = <148>;
> +			vfront-porch = <4>;
> +			vback-porch = <36>;
> +			vsync-len = <5>;
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				lvds0_panel_in: endpoint {

I would name the label panel_in0 and panel_in1 below to have a common
prefix showing that both refer to the same panel.

> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				lvds1_panel_in: endpoint {
> +					remote-endpoint = <&lvds1_out>;
> +				};
> +			};
>  		};
>  	};
> -};

-- 
Regards,

Laurent Pinchart

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ