lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0e9689a6-0636-b1f2-22f7-009180709891@st.com>
Date:   Fri, 2 Aug 2019 08:49:48 +0000
From:   Olivier MOYSAN <olivier.moysan@...com>
To:     Alexandre TORGUE <alexandre.torgue@...com>,
        "linux-stm32@...md-mailman.stormreply.com" 
        <linux-stm32@...md-mailman.stormreply.com>,
        "robh@...nel.org" <robh@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ARM: dts: stm32: add DFSDM pins to stm32mp157c

Hi ALex,

On 8/2/19 10:09 AM, Alexandre Torgue wrote:
> Hi Olivier
> 
> On 8/1/19 9:46 AM, Olivier Moysan wrote:
>> Add DFSDM pins to stm32mp157c.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan@...com>
>> ---
>>    arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 39 +++++++++++++++++++++++++++++++
>>    1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> index 9eaec9bf8cb8..f96a928cbc49 100644
>> --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
>> @@ -230,6 +230,45 @@
>>    				};
>>    			};
>>    
> 
> I use to only take pinconfig which are used in board. So please resend
> with the "board patch".
> 

The DFSDM is one of the interface used in the STM32MP15 soundcard.
This soundcard also uses the Wolfson wm8994 audio codec.
The wm8994 codec driver requires adaptations, and the upstream of
these changes is not planned today.
So, the related board patches cannot be sent.

BRs
Olivier

> regards
> Alex
> 
> 
>> +			dfsdm_clkout_pins_a: dfsdm-clkout-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('B', 13, AF3)>; /* DFSDM_CKOUT */
>> +					bias-disable;
>> +					drive-push-pull;
>> +					slew-rate = <0>;
>> +				};
>> +			};
>> +
>> +			dfsdm_clkout_sleep_pins_a: dfsdm-clkout-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('B', 13, ANALOG)>; /* DFSDM_CKOUT */
>> +				};
>> +			};
>> +
>> +			dfsdm_data1_pins_a: dfsdm-data1-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('C', 3, AF3)>; /* DFSDM_DATA1 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data1_sleep_pins_a: dfsdm-data1-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('C', 3, ANALOG)>; /* DFSDM_DATA1 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data3_pins_a: dfsdm-data3-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('F', 13, AF6)>; /* DFSDM_DATA3 */
>> +				};
>> +			};
>> +
>> +			dfsdm_data3_sleep_pins_a: dfsdm-data3-sleep-pins-0 {
>> +				pins {
>> +					pinmux = <STM32_PINMUX('F', 13, ANALOG)>; /* DFSDM_DATA3 */
>> +				};
>> +			};
>> +
>>    			ethernet0_rgmii_pins_a: rgmii-0 {
>>    				pins1 {
>>    					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
>>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ