linux-kernel - Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CA+h21hqqP0kMpt47GhStCPq2Yt1d_7JuFaoqVyWbFZrh4Am4hw@mail.gmail.com>
Date:   Sun, 4 Aug 2019 22:37:08 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     Hubert Feurstein <h.feurstein@...il.com>
Cc:     netdev <netdev@...r.kernel.org>,
        lkml <linux-kernel@...r.kernel.org>,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Ioana Ciornei <ioana.ciornei@....com>
Subject: Re: [PATCH net] net: dsa: mv88e6xxx: drop adjust_link to enabled phylink

On Wed, 31 Jul 2019 at 18:43, Hubert Feurstein <h.feurstein@...il.com> wrote:
>
> We have to drop the adjust_link callback in order to finally migrate to
> phylink.
>
> Otherwise we get the following warning during startup:
>   "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please
>    migrate to PHYLINK!"
>
> The warning is generated in the function dsa_port_link_register_of in
> dsa/port.c:
>
>   int dsa_port_link_register_of(struct dsa_port *dp)
>   {
>         struct dsa_switch *ds = dp->ds;
>
>         if (!ds->ops->adjust_link)
>                 return dsa_port_phylink_register(dp);
>
>         dev_warn(ds->dev,
>                  "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
>         [...]
>   }
>
> Signed-off-by: Hubert Feurstein <h.feurstein@...il.com>
> ---

Reviewed-by: Vladimir Oltean <olteanv@...il.com>

>  drivers/net/dsa/mv88e6xxx/chip.c | 26 --------------------------
>  1 file changed, 26 deletions(-)
>
> diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
> index 366f70bfe055..37e8babd035f 100644
> --- a/drivers/net/dsa/mv88e6xxx/chip.c
> +++ b/drivers/net/dsa/mv88e6xxx/chip.c
> @@ -27,7 +27,6 @@
>  #include <linux/platform_data/mv88e6xxx.h>
>  #include <linux/netdevice.h>
>  #include <linux/gpio/consumer.h>
> -#include <linux/phy.h>
>  #include <linux/phylink.h>
>  #include <net/dsa.h>
>
> @@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port)
>         return port < chip->info->num_internal_phys;
>  }
>
> -/* We expect the switch to perform auto negotiation if there is a real
> - * phy. However, in the case of a fixed link phy, we force the port
> - * settings from the fixed link settings.
> - */
> -static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
> -                                 struct phy_device *phydev)
> -{
> -       struct mv88e6xxx_chip *chip = ds->priv;
> -       int err;
> -
> -       if (!phy_is_pseudo_fixed_link(phydev) &&
> -           mv88e6xxx_phy_is_internal(ds, port))
> -               return;
> -
> -       mv88e6xxx_reg_lock(chip);
> -       err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
> -                                      phydev->duplex, phydev->pause,
> -                                      phydev->interface);
> -       mv88e6xxx_reg_unlock(chip);
> -
> -       if (err && err != -EOPNOTSUPP)
> -               dev_err(ds->dev, "p%d: failed to configure MAC\n", port);
> -}
> -
>  static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port,
>                                        unsigned long *mask,
>                                        struct phylink_link_state *state)
> @@ -4755,7 +4730,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port,
>  static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
>         .get_tag_protocol       = mv88e6xxx_get_tag_protocol,
>         .setup                  = mv88e6xxx_setup,
> -       .adjust_link            = mv88e6xxx_adjust_link,
>         .phylink_validate       = mv88e6xxx_validate,
>         .phylink_mac_link_state = mv88e6xxx_link_state,
>         .phylink_mac_config     = mv88e6xxx_mac_config,
> --
> 2.22.0
>