linux-kernel - Re: [PATCH 5.2 123/413] PCI: Add missing link delays required by the PCIe spec

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190805123920.GN2640@lahna.fi.intel.com>
Date:   Mon, 5 Aug 2019 15:39:20 +0300
From:   Mika Westerberg <mika.westerberg@...ux.intel.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Justin Forbes <jmforbes@...uxtx.org>,
        LKML <linux-kernel@...r.kernel.org>, stable@...r.kernel.org,
        "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
        Sasha Levin <sashal@...nel.org>
Subject: Re: [PATCH 5.2 123/413] PCI: Add missing link delays required by the
 PCIe spec

Hi,

On Sat, Aug 03, 2019 at 08:50:00AM +0200, Greg Kroah-Hartman wrote:
> On Fri, Aug 02, 2019 at 12:06:39PM -0500, Justin Forbes wrote:
> > On Wed, Jul 24, 2019 at 3:31 PM Greg Kroah-Hartman
> > <gregkh@...uxfoundation.org> wrote:
> > >
> > > [ Upstream commit c2bf1fc212f7e6f25ace1af8f0b3ac061ea48ba5 ]
> > >
> > > Currently Linux does not follow PCIe spec regarding the required delays
> > > after reset. A concrete example is a Thunderbolt add-in-card that
> > > consists of a PCIe switch and two PCIe endpoints:
> > >
> > >   +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
> > >                                   +-01.0-[04-36]-- DS hotplug port
> > >                                   +-02.0-[37]----00.0 xHCI controller
> > >                                   \-04.0-[38-6b]-- DS hotplug port
> > >
> > > The root port (1b.0) and the PCIe switch downstream ports are all PCIe
> > > gen3 so they support 8GT/s link speeds.
> > >
> > > We wait for the PCIe hierarchy to enter D3cold (runtime):
> > >
> > >   pcieport 0000:00:1b.0: power state changed by ACPI to D3cold
> > >
> > > When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the
> > > PCIe switch is put to reset and its power is re-applied. This means that
> > > we must follow the rules in PCIe 4.0 section 6.6.1.
> > >
> > > For the PCIe gen3 ports we are dealing with here, the following applies:
> > >
> > >   With a Downstream Port that supports Link speeds greater than 5.0
> > >   GT/s, software must wait a minimum of 100 ms after Link training
> > >   completes before sending a Configuration Request to the device
> > >   immediately below that Port. Software can determine when Link training
> > >   completes by polling the Data Link Layer Link Active bit or by setting
> > >   up an associated interrupt (see Section 6.7.3.3).
> > >
> > > Translating this into the above topology we would need to do this (DLLLA
> > > stands for Data Link Layer Link Active):
> > >
> > >   pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0
> > >   pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0
> > >   pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0
> > >
> > > I've instrumented the kernel with additional logging so we can see the
> > > actual delays the kernel performs:
> > >
> > >   pcieport 0000:00:1b.0: power state changed by ACPI to D0
> > >   pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
> > >   pcieport 0000:00:1b.0: waking up bus
> > >   pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
> > >   pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
> > >   ...
> > >   pcieport 0000:00:1b.0: PME# disabled
> > >   pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:01:00.0: PME# disabled
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:02:00.0: PME# disabled
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
> > >   pcieport 0000:02:01.0: PME# disabled
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:02:02.0: PME# disabled
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:02:04.0: PME# disabled
> > >   pcieport 0000:02:01.0: PME# enabled
> > >   pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
> > >   pcieport 0000:02:04.0: PME# enabled
> > >   pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
> > >   thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
> > >   ...
> > >   thunderbolt 0000:03:00.0: PME# disabled
> > >   xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
> > >   ...
> > >   xhci_hcd 0000:37:00.0: PME# disabled
> > >
> > > For the switch upstream port (01:00.0) we wait for 100ms but not taking
> > > into account the DLLLA requirement. We then wait 10ms for D3hot -> D0
> > > transition of the root port and the two downstream hotplug ports. This
> > > means that we deviate from what the spec requires.
> > >
> > > Performing the same check for system sleep (s2idle) transitions we can
> > > see following when resuming from s2idle:
> > >
> > >   pcieport 0000:00:1b.0: power state changed by ACPI to D0
> > >   pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
> > >   ...
> > >   pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   ...
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802)
> > >   pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
> > >   pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
> > >   pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
> > >   pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
> > >   xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
> > >   ...
> > >   thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
> > >
> > > This is even worse. None of the mandatory delays are performed. If this
> > > would be S3 instead of s2idle then according to PCI FW spec 3.2 section
> > > 4.6.8.  there is a specific _DSM that allows the OS to skip the delays
> > > but this platform does not provide the _DSM and does not go to S3 anyway
> > > so no firmware is involved that could already handle these delays.
> > >
> > > In this particular Intel Coffee Lake platform these delays are not
> > > actually needed because there is an additional delay as part of the ACPI
> > > power resource that is used to turn on power to the hierarchy but since
> > > that additional delay is not required by any of standards (PCIe, ACPI)
> > > it is not present in the Intel Ice Lake, for example where missing the
> > > mandatory delays causes pciehp to start tearing down the stack too early
> > > (links are not yet trained).
> > >
> > > For this reason, change the PCIe portdrv PM resume hooks so that they
> > > perform the mandatory delays before the downstream component gets
> > > resumed. We perform the delays before port services are resumed because
> > > otherwise pciehp might find that the link is not up (even if it is just
> > > training) and tears-down the hierarchy.
> > >
> > 
> > We have gotten multiple reports in Fedora that this patch has broken
> > suspend for users of 5.1.20 and 5.2 stable kernels.
> 
> And is the issue also in 5.3-rcX kernels?  If so, can we either get this
> reverted there, or find the fix for it?

AFAIK the issue is also in v5.3-rcX.

I started looking at the issue now. Hopefully there is a better solution
than revert but let's see.