linux-kernel - [PATCH 5.2 095/131] i2c: at91: disable TXRDY interrupt after sending data

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190805124958.328486837@linuxfoundation.org>
Date:   Mon,  5 Aug 2019 15:03:02 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Michał Mirosław <mirq-linux@...e.qmqm.pl>,
        Ludovic Desroches <ludovic.desroches@...rochip.com>,
        Raag Jadav <raagjadav@...il.com>,
        Wolfram Sang <wsa@...-dreams.de>
Subject: [PATCH 5.2 095/131] i2c: at91: disable TXRDY interrupt after sending data

From: Michał Mirosław <mirq-linux@...e.qmqm.pl>

commit d12e3aae160fb26b534c4496b211d6e60a5179ed upstream.

Driver was not disabling TXRDY interrupt after last TX byte.
This caused interrupt storm until transfer timeouts for slow
or broken device on the bus. The patch fixes the interrupt storm
on my SAMA5D2-based board.

Cc: stable@...r.kernel.org # 5.2.x
[v5.2 introduced file split; the patch should apply to i2c-at91.c before the split]
Fixes: fac368a04048 ("i2c: at91: add new driver")
Signed-off-by: Michał Mirosław <mirq-linux@...e.qmqm.pl>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
Tested-by: Raag Jadav <raagjadav@...il.com>
Signed-off-by: Wolfram Sang <wsa@...-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/i2c/busses/i2c-at91-master.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -122,9 +122,11 @@ static void at91_twi_write_next_byte(str
 	writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
 
 	/* send stop when last byte has been written */
-	if (--dev->buf_len == 0)
+	if (--dev->buf_len == 0) {
 		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
+		at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_TXRDY);
+	}
 
 	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
@@ -542,9 +544,8 @@ static int at91_do_twi_transfer(struct a
 		} else {
 			at91_twi_write_next_byte(dev);
 			at91_twi_write(dev, AT91_TWI_IER,
-				       AT91_TWI_TXCOMP |
-				       AT91_TWI_NACK |
-				       AT91_TWI_TXRDY);
+				       AT91_TWI_TXCOMP | AT91_TWI_NACK |
+				       (dev->buf_len ? AT91_TWI_TXRDY : 0));
 		}
 	}