| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190805165453.3989-17-alexandru.ardelean@analog.com>
Date: Mon, 5 Aug 2019 19:54:53 +0300
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <davem@...emloft.net>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <f.fainelli@...il.com>,
<hkallweit1@...il.com>, <andrew@...n.ch>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH 16/16] dt-bindings: net: add bindings for ADIN PHY driver
This change adds bindings for the Analog Devices ADIN PHY driver, detailing
all the properties implemented by the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
.../devicetree/bindings/net/adi,adin.yaml | 93 +++++++++++++++++++
MAINTAINERS | 2 +
include/dt-bindings/net/adin.h | 26 ++++++
3 files changed, 121 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin.yaml
create mode 100644 include/dt-bindings/net/adin.h
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
new file mode 100644
index 000000000000..fcf884bb86f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1200/ADIN1300 PHY
+
+maintainers:
+ - Alexandru Ardelean <alexandru.ardelean@...log.com>
+
+description: |
+ Bindings for Analog Devices Industrial Ethernet PHYs
+
+properties:
+ compatible:
+ description: |
+ Compatible list, may contain "ethernet-phy-ieee802.3-c45" in which case
+ Clause 45 will be used to access device management registers. If
+ unspecified, Clause 22 will be used. Use this only when MDIO supports
+ Clause 45 access, but there is no other way to determine this.
+ enum:
+ - ethernet-phy-ieee802.3-c45
+
+ adi,phy-mode-internal:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: |
+ The internal mode of the PHY. This assumes that there is a PHY converter
+ in-between the MAC & PHY.
+ enum: [ "rgmii", "rgmii-id", "rgmii-txid", "rgmii-rxid", "rmii", "mii" ]
+
+ adi,rx-internal-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RGMII RX Clock Delay used only when PHY operates in RGMII mode (phy-mode
+ is "rgmii-id", "rgmii-rxid", "rgmii-txid") see `dt-bindings/net/adin.h`
+ default value is 0 (which represents 2 ns)
+ enum: [ 0, 1, 2, 6, 7 ]
+
+ adi,tx-internal-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ RGMII TX Clock Delay used only when PHY operates in RGMII mode (phy-mode
+ is "rgmii-id", "rgmii-rxid", "rgmii-txid") see `dt-bindings/net/adin.h`
+ default value is 0 (which represents 2 ns)
+ enum: [ 0, 1, 2, 6, 7 ]
+
+ adi,fifo-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ When operating in RMII mode, this option configures the FIFO depth.
+ See `dt-bindings/net/adin.h`.
+ enum: [ 0, 1, 2, 3, 4, 5 ]
+
+ adi,eee-enabled:
+ description: |
+ Advertise EEE capabilities on power-up/init (default disabled)
+ type: boolean
+
+ adi,disable-energy-detect:
+ description: |
+ Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
+ is enabled if this property is unspecified)
+ type: boolean
+
+ reset-gpios:
+ description: |
+ GPIO to reset the PHY
+ see Documentation/devicetree/bindings/gpio/gpio.txt.
+
+examples:
+ - |
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0>;
+ };
+ - |
+ #include <dt-bindings/net/adin.h>
+ ethernet-phy@1 {
+ reg = <1>;
+ adi,phy-mode-internal = "rgmii-id";
+
+ adi,rx-internal-delay = <ADIN1300_RGMII_1_80_NS>;
+ adi,tx-internal-delay = <ADIN1300_RGMII_2_20_NS>;
+ };
+ - |
+ #include <dt-bindings/net/adin.h>
+ ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rmii";
+
+ adi,fifo-depth = <ADIN1300_RMII_16_BITS>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index faf5723610c8..6ffbb266dee4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -944,6 +944,8 @@ L: netdev@...r.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/net/phy/adin.c
+F: include/dt-bindings/net/adin.h
+F: Documentation/devicetree/bindings/net/adi,adin.yaml
ANALOG DEVICES INC ADIS DRIVER LIBRARY
M: Alexandru Ardelean <alexandru.ardelean@...log.com>
diff --git a/include/dt-bindings/net/adin.h b/include/dt-bindings/net/adin.h
new file mode 100644
index 000000000000..4c3afa550c59
--- /dev/null
+++ b/include/dt-bindings/net/adin.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/**
+ * Device Tree constants for Analog Devices Industrial Ethernet PHYs
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+
+#ifndef _DT_BINDINGS_ADIN_H
+#define _DT_BINDINGS_ADIN_H
+
+/* RGMII internal delay settings for rx and tx for ADIN1300 */
+#define ADIN1300_RGMII_1_60_NS 0x1
+#define ADIN1300_RGMII_1_80_NS 0x2
+#define ADIN1300_RGMII_2_00_NS 0x0
+#define ADIN1300_RGMII_2_20_NS 0x6
+#define ADIN1300_RGMII_2_40_NS 0x7
+
+/* RMII fifo depth values */
+#define ADIN1300_RMII_4_BITS 0x0
+#define ADIN1300_RMII_8_BITS 0x1
+#define ADIN1300_RMII_12_BITS 0x2
+#define ADIN1300_RMII_16_BITS 0x3
+#define ADIN1300_RMII_20_BITS 0x4
+#define ADIN1300_RMII_24_BITS 0x5
+
+#endif
--
2.20.1
Powered by blists - more mailing lists