| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqK6EqpcRj0JVkAQXRryPU1Jq+gA68EHCkFw16j_z95yvw@mail.gmail.com>
Date: Tue, 6 Aug 2019 09:04:26 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Alexandru Ardelean <alexandru.ardelean@...log.com>
Cc: netdev <netdev@...r.kernel.org>, devicetree@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
David Miller <davem@...emloft.net>,
Mark Rutland <mark.rutland@....com>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH 16/16] dt-bindings: net: add bindings for ADIN PHY driver
On Mon, Aug 5, 2019 at 7:55 AM Alexandru Ardelean
<alexandru.ardelean@...log.com> wrote:
>
> This change adds bindings for the Analog Devices ADIN PHY driver, detailing
> all the properties implemented by the driver.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
> ---
> .../devicetree/bindings/net/adi,adin.yaml | 93 +++++++++++++++++++
> MAINTAINERS | 2 +
> include/dt-bindings/net/adin.h | 26 ++++++
> 3 files changed, 121 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/adi,adin.yaml
> create mode 100644 include/dt-bindings/net/adin.h
>
> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
> new file mode 100644
> index 000000000000..fcf884bb86f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/adi,adin.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADIN1200/ADIN1300 PHY
> +
> +maintainers:
> + - Alexandru Ardelean <alexandru.ardelean@...log.com>
> +
> +description: |
> + Bindings for Analog Devices Industrial Ethernet PHYs
> +
Needs an:
allOf:
- $ref: ethernet-phy.yaml#
> +properties:
> + compatible:
> + description: |
> + Compatible list, may contain "ethernet-phy-ieee802.3-c45" in which case
> + Clause 45 will be used to access device management registers. If
> + unspecified, Clause 22 will be used. Use this only when MDIO supports
> + Clause 45 access, but there is no other way to determine this.
> + enum:
> + - ethernet-phy-ieee802.3-c45
Then you can drop 'compatible' from here as it is covered by the above schema.
> +
> + adi,phy-mode-internal:
> + $ref: /schemas/types.yaml#/definitions/string
This has to be under an 'allOf' or it doesn't actually work. Same below.
> + description: |
No special formatting here, you can drop '|'.
> + The internal mode of the PHY. This assumes that there is a PHY converter
> + in-between the MAC & PHY.
> + enum: [ "rgmii", "rgmii-id", "rgmii-txid", "rgmii-rxid", "rmii", "mii" ]
Don't need quotes here.
> +
> + adi,rx-internal-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + RGMII RX Clock Delay used only when PHY operates in RGMII mode (phy-mode
> + is "rgmii-id", "rgmii-rxid", "rgmii-txid") see `dt-bindings/net/adin.h`
> + default value is 0 (which represents 2 ns)
Use 'default: 0' to specify defaults.
> + enum: [ 0, 1, 2, 6, 7 ]
> +
> + adi,tx-internal-delay:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + RGMII TX Clock Delay used only when PHY operates in RGMII mode (phy-mode
> + is "rgmii-id", "rgmii-rxid", "rgmii-txid") see `dt-bindings/net/adin.h`
> + default value is 0 (which represents 2 ns)
> + enum: [ 0, 1, 2, 6, 7 ]
> +
> + adi,fifo-depth:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: |
> + When operating in RMII mode, this option configures the FIFO depth.
> + See `dt-bindings/net/adin.h`.
> + enum: [ 0, 1, 2, 3, 4, 5 ]
> +
> + adi,eee-enabled:
Isn't there a standard property for EEE control?
> + description: |
> + Advertise EEE capabilities on power-up/init (default disabled)
> + type: boolean
> +
> + adi,disable-energy-detect:
> + description: |
> + Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
> + is enabled if this property is unspecified)
> + type: boolean
> +
> + reset-gpios:
> + description: |
> + GPIO to reset the PHY
> + see Documentation/devicetree/bindings/gpio/gpio.txt.
Active high or low?
> +
> +examples:
> + - |
> + ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c45";
> + reg = <0>;
> + };
Not really anything specific to this binding. Drop it.
> + - |
> + #include <dt-bindings/net/adin.h>
> + ethernet-phy@1 {
> + reg = <1>;
> + adi,phy-mode-internal = "rgmii-id";
> +
> + adi,rx-internal-delay = <ADIN1300_RGMII_1_80_NS>;
> + adi,tx-internal-delay = <ADIN1300_RGMII_2_20_NS>;
> + };
> + - |
> + #include <dt-bindings/net/adin.h>
> + ethernet-phy@2 {
> + reg = <2>;
> + phy-mode = "rmii";
> +
> + adi,fifo-depth = <ADIN1300_RMII_16_BITS>;
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index faf5723610c8..6ffbb266dee4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -944,6 +944,8 @@ L: netdev@...r.kernel.org
> W: http://ez.analog.com/community/linux-device-drivers
> S: Supported
> F: drivers/net/phy/adin.c
> +F: include/dt-bindings/net/adin.h
> +F: Documentation/devicetree/bindings/net/adi,adin.yaml
>
> ANALOG DEVICES INC ADIS DRIVER LIBRARY
> M: Alexandru Ardelean <alexandru.ardelean@...log.com>
> diff --git a/include/dt-bindings/net/adin.h b/include/dt-bindings/net/adin.h
> new file mode 100644
> index 000000000000..4c3afa550c59
> --- /dev/null
> +++ b/include/dt-bindings/net/adin.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/**
> + * Device Tree constants for Analog Devices Industrial Ethernet PHYs
> + *
> + * Copyright 2019 Analog Devices Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_ADIN_H
> +#define _DT_BINDINGS_ADIN_H
> +
> +/* RGMII internal delay settings for rx and tx for ADIN1300 */
> +#define ADIN1300_RGMII_1_60_NS 0x1
> +#define ADIN1300_RGMII_1_80_NS 0x2
> +#define ADIN1300_RGMII_2_00_NS 0x0
> +#define ADIN1300_RGMII_2_20_NS 0x6
> +#define ADIN1300_RGMII_2_40_NS 0x7
> +
> +/* RMII fifo depth values */
> +#define ADIN1300_RMII_4_BITS 0x0
> +#define ADIN1300_RMII_8_BITS 0x1
> +#define ADIN1300_RMII_12_BITS 0x2
> +#define ADIN1300_RMII_16_BITS 0x3
> +#define ADIN1300_RMII_20_BITS 0x4
> +#define ADIN1300_RMII_24_BITS 0x5
> +
> +#endif
> --
> 2.20.1
>
Powered by blists - more mailing lists