[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1565060061-11588-3-git-send-email-masonccyang@mxic.com.tw>
Date: Tue, 6 Aug 2019 10:54:21 +0800
From: Mason Yang <masonccyang@...c.com.tw>
To: broonie@...nel.org, robh+dt@...nel.org, mark.rutland@....com,
linux-kernel@...r.kernel.org, linux-spi@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
Geert Uytterhoeven <geert+renesas@...der.be>,
devicetree@...r.kernel.org
Cc: juliensu@...c.com.tw, Simon Horman <horms@...ge.net.au>,
lee.jones@...aro.org, sergei.shtylyov@...entembedded.com,
Mason Yang <masonccyang@...c.com.tw>, marek.vasut@...il.com,
miquel.raynal@...tlin.com
Subject: [PATCH v17 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
Document the bindings used by the Renesas R-Car Gen3 RPC-IF controller.
Signed-off-by: Mason Yang <masonccyang@...c.com.tw>
Reviewed-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/spi/spi-renesas-rpc.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..d4344c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,45 @@
+Renesas R-Car Gen3 RPC-IF controller Device Tree Bindings
+---------------------------------------------------------
+
+Required properties:
+- compatible: should be an SoC-specific compatible value, followed by
+ "renesas,rcar-gen3-rpc" as a fallback.
+ supported SoC-specific values are:
+ "renesas,r8a77980-rpc" (R-Car V3H)
+ "renesas,r8a77995-rpc" (R-Car D3)
+- reg: should contain three register areas:
+ first for the base address of RPC-IF registers,
+ second for the direct mapping read mode and
+ third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clocks: should contain the clock phandle/specifier pair for the module clock.
+- clock-names: should contain "rpc"
+- power-domains: should contain the power domain phandle/secifier pair.
+- resets: should contain the reset controller phandle/specifier pair.
+- #address-cells: should be 1
+- #size-cells: should be 0
+- flash: should be represented by a subnode of the RPC-IF node,
+ its "compatible" property contains "jedec,spi-nor" if SPI is used.
+
+Example:
+
+ rpc: spi@...00000 {
+ compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc";
+ reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ };
--
1.9.1
Powered by blists - more mailing lists