[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190807223111.230846-2-saravanak@google.com>
Date: Wed, 7 Aug 2019 15:31:09 -0700
From: Saravana Kannan <saravanak@...gle.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Viresh Kumar <vireshk@...nel.org>, Nishanth Menon <nm@...com>,
Stephen Boyd <sboyd@...nel.org>,
"Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: Saravana Kannan <saravanak@...gle.com>,
Georgi Djakov <georgi.djakov@...aro.org>,
vincent.guittot@...aro.org, seansw@....qualcomm.com,
daidavid1@...eaurora.org, adharmap@...eaurora.org,
Rajendra Nayak <rnayak@...eaurora.org>, sibis@...eaurora.org,
bjorn.andersson@...aro.org, evgreen@...omium.org,
kernel-team@...roid.com, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v5 1/3] dt-bindings: opp: Introduce opp-peak-kBps and
opp-avg-kBps bindings
Interconnects often quantify their performance points in terms of
bandwidth. So, add opp-peak-kBps (required) and opp-avg-kBps (optional) to
allow specifying Bandwidth OPP tables in DT.
opp-peak-kBps is a required property that replaces opp-hz for Bandwidth OPP
tables.
opp-avg-kBps is an optional property that can be used in Bandwidth OPP
tables.
Signed-off-by: Saravana Kannan <saravanak@...gle.com>
---
Documentation/devicetree/bindings/opp/opp.txt | 15 ++++++++++++---
.../devicetree/bindings/property-units.txt | 4 ++++
2 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 68592271461f..dbad8eb6c746 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -83,9 +83,14 @@ properties.
Required properties:
- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
- required property for all device nodes but devices like power domains. The
- power domain nodes must have another (implementation dependent) property which
- uniquely identifies the OPP nodes.
+ required property for all device nodes except for devices like power domains
+ or bandwidth opp tables. The power domain nodes must have another
+ (implementation dependent) property which uniquely identifies the OPP nodes.
+ The interconnect opps are required to have the opp-peak-kBps property.
+
+- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as a 32-bit
+ big-endian integer. This is a required property for all devices that don't
+ have opp-hz. For example, bandwidth OPP tables for interconnect paths.
Optional properties:
- opp-microvolt: voltage in micro Volts.
@@ -132,6 +137,10 @@ Optional properties:
- opp-level: A value representing the performance level of the device,
expressed as a 32-bit integer.
+- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as a
+ 32-bit big-endian integer. This property is only meaningful in OPP tables
+ where opp-peak-kBps is present.
+
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
index e9b8360b3288..c80a110c1e26 100644
--- a/Documentation/devicetree/bindings/property-units.txt
+++ b/Documentation/devicetree/bindings/property-units.txt
@@ -41,3 +41,7 @@ Temperature
Pressure
----------------------------------------
-kpascal : kilopascal
+
+Throughput
+----------------------------------------
+-kBps : kilobytes per second
--
2.23.0.rc1.153.gdeed80330f-goog
Powered by blists - more mailing lists