[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190807082556.5013-8-philippe.schenker@toradex.com>
Date: Wed, 7 Aug 2019 08:26:19 +0000
From: Philippe Schenker <philippe.schenker@...adex.com>
To: Marcel Ziswiler <marcel.ziswiler@...adex.com>,
Max Krummenacher <max.krummenacher@...adex.com>,
"stefan@...er.ch" <stefan@...er.ch>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Michal Vokáč <michal.vokac@...ft.com>,
Fabio Estevam <festevam@...il.com>
CC: Stefan Agner <stefan.agner@...adex.com>,
Philippe Schenker <philippe.schenker@...adex.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH v3 07/21] ARM: dts: imx7-colibri: fix 1.8V/UHS support
From: Stefan Agner <stefan.agner@...adex.com>
Add pinmuxing and do not specify voltage restrictions for the usdhc
instance available on the modules edge connector. This allows to use
SD-cards with higher transfer modes if supported by the carrier board.
Signed-off-by: Stefan Agner <stefan.agner@...adex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
---
Changes in v3:
- Add new commit message from Stefan's proposal on ML
Changes in v2: None
arch/arm/boot/dts/imx7-colibri.dtsi | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 16d1a1ed1aff..67f5e0c87fdc 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -326,7 +326,6 @@
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
- no-1-8-v;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
disable-wp;
vqmmc-supply = <®_LDO2>;
@@ -671,6 +670,28 @@
>;
};
+ pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5a
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1a
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x5b
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x1b
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX7D_PAD_SD3_CMD__SD3_CMD 0x59
--
2.22.0
Powered by blists - more mailing lists