| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 8 Aug 2019 14:08:13 +0300
From: Jaafar Ali <jaafarkhalaf@...il.com>
To: Sylwester Nawrocki <s.nawrocki@...sung.com>
Cc: sboyd@...nel.org, mturquette@...libre.com, linux@...linux.org.uk,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-samsung-soc@...r.kernel.org,
Krzysztof Kozlowski <krzk@...nel.org>, cw00.choi@...sung.com,
m.szyprowski@...sung.com, b.zolnierkie@...sung.com
Subject: Re: [PATCH 2/2] clk: samsung: exynos5800: Move MAU subsystem clocks
to MAU sub-CMU
Tested-by: Jaafar Ali <jaafarkhalaf@...il.com>
On Thu, 8 Aug 2019 at 12:24, Sylwester Nawrocki <s.nawrocki@...sung.com> wrote:
>
> This patch fixes broken sound on Exynos5422/5800 platforms after
> system/suspend resume cycle in cases where the audio root clock
> is derived from MAU_EPLL_CLK.
>
> In order to preserve state of the USER_MUX_MAU_EPLL_CLK clock mux
> during system suspend/resume cycle for Exynos5800 we group the MAU
> block input clocks in "MAU" sub-CMU and add the clock mux control
> bit to .suspend_regs. This ensures that user configuration of the mux
> is not lost after the PMU block changes the mux setting to OSC_DIV
> when switching off the MAU power domain.
>
> Adding the SRC_TOP9 register to exynos5800_clk_regs[] array is not
> sufficient as at the time of the syscore_ops suspend call MAU power
> domain is already turned off and we already save and subsequently
> restore an incorrect register's value.
>
> Fixes: b06a532bf1fa ("clk: samsung: Add Exynos5 sub-CMU clock driver")
> Reported-by: Jaafar Ali <jaafarkhalaf@...il.com>
> Suggested-by: Marek Szyprowski <m.szyprowski@...sung.com>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@...sung.com>
> ---
> drivers/clk/samsung/clk-exynos5420.c | 54 ++++++++++++++++++++++------
> 1 file changed, 43 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index fdb17c799aa5..b52daf5aa755 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -534,8 +534,6 @@ static const struct samsung_gate_clock exynos5800_gate_clks[] __initconst = {
> GATE_BUS_TOP, 24, 0, 0),
> GATE(CLK_ACLK432_SCALER, "aclk432_scaler", "mout_user_aclk432_scaler",
> GATE_BUS_TOP, 27, CLK_IS_CRITICAL, 0),
> - GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
> - SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
> };
>
> static const struct samsung_mux_clock exynos5420_mux_clks[] __initconst = {
> @@ -577,8 +575,13 @@ static const struct samsung_div_clock exynos5420_div_clks[] __initconst = {
>
> static const struct samsung_gate_clock exynos5420_gate_clks[] __initconst = {
> GATE(CLK_SECKEY, "seckey", "aclk66_psgen", GATE_BUS_PERIS1, 1, 0, 0),
> + /* Maudio Block */
> GATE(CLK_MAU_EPLL, "mau_epll", "mout_mau_epll_clk",
> SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
> + GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
> + GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
> };
>
> static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
> @@ -1017,12 +1020,6 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
> GATE(CLK_SCLK_DP1, "sclk_dp1", "dout_dp1",
> GATE_TOP_SCLK_DISP1, 20, CLK_SET_RATE_PARENT, 0),
>
> - /* Maudio Block */
> - GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
> - GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
> - GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
> - GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
> -
> /* FSYS Block */
> GATE(CLK_TSI, "tsi", "aclk200_fsys", GATE_BUS_FSYS0, 0, 0, 0),
> GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
> @@ -1281,6 +1278,20 @@ static struct exynos5_subcmu_reg_dump exynos5x_mfc_suspend_regs[] = {
> { DIV4_RATIO, 0, 0x3 }, /* DIV dout_mfc_blk */
> };
>
> +
> +static const struct samsung_gate_clock exynos5800_mau_gate_clks[] __initconst = {
> + GATE(CLK_MAU_EPLL, "mau_epll", "mout_user_mau_epll",
> + SRC_MASK_TOP7, 20, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_MAUDIO0, "sclk_maudio0", "dout_maudio0",
> + GATE_TOP_SCLK_MAU, 0, CLK_SET_RATE_PARENT, 0),
> + GATE(CLK_SCLK_MAUPCM0, "sclk_maupcm0", "dout_maupcm0",
> + GATE_TOP_SCLK_MAU, 1, CLK_SET_RATE_PARENT, 0),
> +};
> +
> +static struct exynos5_subcmu_reg_dump exynos5800_mau_suspend_regs[] = {
> + { SRC_TOP9, 0, BIT(8) },
> +};
> +
> static const struct exynos5_subcmu_info exynos5x_disp_subcmu = {
> .div_clks = exynos5x_disp_div_clks,
> .nr_div_clks = ARRAY_SIZE(exynos5x_disp_div_clks),
> @@ -1311,12 +1322,27 @@ static const struct exynos5_subcmu_info exynos5x_mfc_subcmu = {
> .pd_name = "MFC",
> };
>
> +static const struct exynos5_subcmu_info exynos5800_mau_subcmu = {
> + .gate_clks = exynos5800_mau_gate_clks,
> + .nr_gate_clks = ARRAY_SIZE(exynos5800_mau_gate_clks),
> + .suspend_regs = exynos5800_mau_suspend_regs,
> + .nr_suspend_regs = ARRAY_SIZE(exynos5800_mau_suspend_regs),
> + .pd_name = "MAU",
> +};
> +
> static const struct exynos5_subcmu_info *exynos5x_subcmus[] = {
> &exynos5x_disp_subcmu,
> &exynos5x_gsc_subcmu,
> &exynos5x_mfc_subcmu,
> };
>
> +static const struct exynos5_subcmu_info *exynos5800_subcmus[] = {
> + &exynos5x_disp_subcmu,
> + &exynos5x_gsc_subcmu,
> + &exynos5x_mfc_subcmu,
> + &exynos5800_mau_subcmu,
> +};
> +
> static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __initconst = {
> PLL_35XX_RATE(24 * MHZ, 2000000000, 250, 3, 0),
> PLL_35XX_RATE(24 * MHZ, 1900000000, 475, 6, 0),
> @@ -1547,11 +1573,17 @@ static void __init exynos5x_clk_init(struct device_node *np,
> samsung_clk_extended_sleep_init(reg_base,
> exynos5x_clk_regs, ARRAY_SIZE(exynos5x_clk_regs),
> exynos5420_set_clksrc, ARRAY_SIZE(exynos5420_set_clksrc));
> - if (soc == EXYNOS5800)
> +
> + if (soc == EXYNOS5800) {
> samsung_clk_sleep_init(reg_base, exynos5800_clk_regs,
> ARRAY_SIZE(exynos5800_clk_regs));
> - exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5x_subcmus),
> - exynos5x_subcmus);
> +
> + exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5800_subcmus),
> + exynos5800_subcmus);
> + } else {
> + exynos5_subcmus_init(ctx, ARRAY_SIZE(exynos5x_subcmus),
> + exynos5x_subcmus);
> + }
>
> samsung_clk_of_add_provider(np, ctx);
> }
> --
> 2.17.1
>
>
>
Powered by blists - more mailing lists