linux-kernel - Re: [PATCH v5 1/2] usbip: Skip DMA mapping and unmapping for urb at vhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 8 Aug 2019 10:18:59 -0600
From:   shuah <shuah@...nel.org>
To:     Suwan Kim <suwan.kim027@...il.com>, valentina.manea.m@...il.com,
        gregkh@...uxfoundation.org, stern@...land.harvard.edu
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        shuah <shuah@...nel.org>
Subject: Re: [PATCH v5 1/2] usbip: Skip DMA mapping and unmapping for urb at
 vhci

On 8/8/19 9:54 AM, Suwan Kim wrote:
> vhci doesn’t do DMA for remote device. Actually, the real DMA
> operation is done by network card driver. vhci just passes virtual
> address of the buffer to the network stack, so vhci doesn’t use and
> need dma address of the buffer of the URB.
> 
> But HCD provides DMA mapping and unmapping function by default.
> Moreover, it causes unnecessary DMA mapping and unmapping which
> will be done again at the NIC driver and it wastes CPU cycles.
> So, implement map_urb_for_dma and unmap_urb_for_dma function for
> vhci in order to skip the DMA mapping and unmapping procedure.
> 
> When it comes to supporting SG for vhci, it is useful to use native
> SG list (urb->num_sgs) instead of mapped SG list because DMA mapping
> fnuction can adjust the number of SG list (urb->num_mapped_sgs).
> And vhci_map_urb_for_dma() prevents isoc pipe from using SG as
> hcd_map_urb_for_dma() does.
> 
> Signed-off-by: Suwan Kim <suwan.kim027@...il.com>
> ---
> v4 - v5
> - Replace pr_err() with dev_err() in the error path.
> 
> v3 - v4
> - Replace WARN_ON() with pr_err() in the error path.
> 
> v2 - v3
> - Move setting URB_DMA_MAP_SG flag to the patch 2.
> - Prevent isoc pipe from using SG buffer.
> 
> v1 - v2
> - Add setting URB_DMA_MAP_SG flag in urb->transfer_flags to tell
> stub driver to use SG buffer.
> ---
>   drivers/usb/usbip/vhci_hcd.c | 19 +++++++++++++++++++
>   1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
> index 000ab7225717..ea82b932a2f9 100644
> --- a/drivers/usb/usbip/vhci_hcd.c
> +++ b/drivers/usb/usbip/vhci_hcd.c
> @@ -1288,6 +1288,22 @@ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
>   	return 0;
>   }
>   
> +static int vhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
> +				gfp_t mem_flags)
> +{
> +	if (usb_endpoint_xfer_isoc(&urb->ep->desc) && urb->num_sgs) {
> +		dev_err(&urb->dev->dev, "SG is not supported for isochronous transfer\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static void vhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
> +{
> +	dev_dbg(hcd->self.controller, "vhci does not unmap urb for dma\n");
> +}
> +
>   static const struct hc_driver vhci_hc_driver = {
>   	.description	= driver_name,
>   	.product_desc	= driver_desc,
> @@ -1304,6 +1320,9 @@ static const struct hc_driver vhci_hc_driver = {
>   
>   	.get_frame_number = vhci_get_frame_number,
>   
> +	.map_urb_for_dma = vhci_map_urb_for_dma,
> +	.unmap_urb_for_dma = vhci_unmap_urb_for_dma,
> +
>   	.hub_status_data = vhci_hub_status,
>   	.hub_control    = vhci_hub_control,
>   	.bus_suspend	= vhci_bus_suspend,
> 

Looks good to me.

Reviewed-by: Shuah Khan <skhan@...uxfoundation.org>

thanks,
-- Shuah