[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <754c3127-dd78-3afd-e047-68404d6ebec5@ti.com>
Date: Fri, 9 Aug 2019 13:31:19 +0300
From: Roger Quadros <rogerq@...com>
To: Felipe Balbi <balbi@...nel.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
<linux-usb@...r.kernel.org>, <linux-samsung-soc@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: Re: [PATCH] usb: dwc3: remove generic PHYs forwarding for XHCI device
Hi,
On 08/08/2019 15:47, Felipe Balbi wrote:
>
> Hi,
>
> Marek Szyprowski <m.szyprowski@...sung.com> writes:
>
>> Commit 08f871a3aca2 ("usb: dwc3: host: convey the PHYs to xhci") added
>> forwarding of the generic PHYs from DWC3 core to the instantiated XHCI-plat
>> device. However XHCI(-plat) driver never gained support for generic PHYs,
>> thus the lookup added by that commit is never used. In meantime the commit
>> d64ff406e51e ("usb: dwc3: use bus->sysdev for DMA configuration")
>> incorrectly changed the device used for creating lookup, making the lookup
>> useless and generic PHYs inaccessible from XHCI device.
>>
>> However since commit 178a0bce05cb ("usb: core: hcd: integrate the PHY
>> wrapper into the HCD core") USB HCD already handles generic PHYs acquired
>> from the HCD's 'sysdev', which in this case is DWC3 core device. This means
>> that creating any custom lookup entries for XHCI driver is no longer needed
>> and can be simply removed.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
>> ---
>> drivers/usb/dwc3/host.c | 22 ++++------------------
>> 1 file changed, 4 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
>> index f55947294f7c..8deea8c91e03 100644
>> --- a/drivers/usb/dwc3/host.c
>> +++ b/drivers/usb/dwc3/host.c
>> @@ -85,7 +85,7 @@ int dwc3_host_init(struct dwc3 *dwc)
>> DWC3_XHCI_RESOURCES_NUM);
>> if (ret) {
>> dev_err(dwc->dev, "couldn't add resources to xHCI device\n");
>> - goto err1;
>> + goto err;
>> }
>>
>> memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
>> @@ -112,37 +112,23 @@ int dwc3_host_init(struct dwc3 *dwc)
>> ret = platform_device_add_properties(xhci, props);
>> if (ret) {
>> dev_err(dwc->dev, "failed to add properties to xHCI\n");
>> - goto err1;
>> + goto err;
>> }
>> }
>>
>> - phy_create_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> - dev_name(dwc->dev));
>> - phy_create_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> - dev_name(dwc->dev));
>> -
>> ret = platform_device_add(xhci);
>> if (ret) {
>> dev_err(dwc->dev, "failed to register xHCI device\n");
>> - goto err2;
>> + goto err;
>> }
>>
>> return 0;
>> -err2:
>> - phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> - dev_name(dwc->dev));
>> - phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> - dev_name(dwc->dev));
>> -err1:
>> +err:
>> platform_device_put(xhci);
>> return ret;
>> }
>>
>> void dwc3_host_exit(struct dwc3 *dwc)
>> {
>> - phy_remove_lookup(dwc->usb2_generic_phy, "usb2-phy",
>> - dev_name(dwc->dev));
>> - phy_remove_lookup(dwc->usb3_generic_phy, "usb3-phy",
>> - dev_name(dwc->dev));
>> platform_device_unregister(dwc->xhci);
>> }
>
> Roger, could you verify that this doesn't regress any of your platforms?
Patch is fine with our platforms.
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists