[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190809112853.15846-4-stefan-gabriel.mirea@nxp.com>
Date: Fri, 9 Aug 2019 11:29:12 +0000
From: Stefan-gabriel Mirea <stefan-gabriel.mirea@....com>
To: "corbet@....net" <corbet@....net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will@...nel.org" <will@...nel.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Leo Li <leoyang.li@....com>
CC: "jslaby@...e.com" <jslaby@...e.com>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Cosmin Stefan Stoica <cosmin.stoica@....com>,
Dan Nica <dan.nica@....com>,
Larisa Ileana Grigore <larisa.grigore@....com>
Subject: [PATCH v2 3/6] arm64: dts: fsl: Add device tree for S32V234-EVB
From: Stoica Cosmin-Stefan <cosmin.stoica@....com>
Add initial version of device tree for S32V234-EVB, including nodes for the
4 Cortex-A53 cores, AIPS bus with UART modules, ARM architected timer and
Generic Interrupt Controller (GIC).
Keep SoC level separate from board level to let future boards with this SoC
share common properties, while the dts files will keep board-dependent
properties.
Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@....com>
Signed-off-by: Mihaela Martinas <Mihaela.Martinas@...escale.com>
Signed-off-by: Dan Nica <dan.nica@....com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@....com>
Signed-off-by: Phu Luu An <phu.luuan@....com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
.../boot/dts/freescale/fsl-s32v234-evb.dts | 24 ++++
.../arm64/boot/dts/freescale/fsl-s32v234.dtsi | 130 ++++++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c043aca66572..3af29b58a833 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -26,3 +26,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+
+dtb-$(CONFIG_ARCH_S32) += fsl-s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts b/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
new file mode 100644
index 000000000000..92bf6c5563a3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ */
+
+/dts-v1/;
+#include "fsl-s32v234.dtsi"
+
+/ {
+ compatible = "fsl,s32v234-evb", "fsl,s32v234";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi b/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
new file mode 100644
index 000000000000..6d686d3ba997
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2015-2016 Freescale Semiconductor, Inc.
+ * Copyright 2016-2018 NXP
+ */
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "Freescale S32V234";
+ compatible = "fsl,s32v234";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x80000000>;
+ next-level-cache = <&cluster0_l2_cache>;
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x80000000>;
+ next-level-cache = <&cluster0_l2_cache>;
+ };
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x80000000>;
+ next-level-cache = <&cluster1_l2_cache>;
+ };
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x80000000>;
+ next-level-cache = <&cluster1_l2_cache>;
+ };
+
+ cluster0_l2_cache: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2_cache: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ aips0: aips-bus@...00000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ reg = <0x0 0x40000000 0x0 0x7D000>;
+ ranges;
+
+ uart0: serial@...53000 {
+ compatible = "fsl,s32-linflexuart";
+ reg = <0x0 0x40053000 0x0 0x1000>;
+ interrupts = <0 59 1>;
+ status = "disabled";
+ };
+ };
+
+ aips1: aips-bus@...80000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+ reg = <0x0 0x40080000 0x0 0x70000>;
+ ranges;
+
+ uart1: serial@...bc000 {
+ compatible = "fsl,s32-linflexuart";
+ reg = <0x0 0x400bc000 0x0 0x1000>;
+ interrupts = <0 60 1>;
+ status = "disabled";
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ /* clock-frequency might be modified by u-boot, depending on the
+ * chip version.
+ */
+ clock-frequency = <10000000>;
+ };
+
+ gic: interrupt-controller@...01000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0x7d001000 0 0x1000>,
+ <0 0x7d002000 0 0x2000>,
+ <0 0x7d004000 0 0x2000>,
+ <0 0x7d006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+};
--
2.22.0
Powered by blists - more mailing lists