[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0c0f5ba1-fe66-25ea-35f6-089ec22f235e@samsung.com>
Date: Fri, 9 Aug 2019 13:34:37 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Arnd Bergmann <arnd@...db.de>
Cc: Tony Lindgren <tony@...mide.com>,
Aaro Koskinen <aaro.koskinen@....fi>,
Lee Jones <lee.jones@...aro.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
Jingoo Han <jingoohan1@...il.com>, linux-omap@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Tomi Valkeinen <tomi.valkeinen@...com>,
dri-devel@...ts.freedesktop.org, linux-fbdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 09/22] fbdev: omap: avoid using mach/*.h files
On 8/8/19 11:22 PM, Arnd Bergmann wrote:
> All the headers we actually need are now in include/linux/soc,
> so use those versions instead and allow compile-testing on
> other architectures.
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
For fbdev part:
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> drivers/video/backlight/Kconfig | 4 ++--
> drivers/video/backlight/omap1_bl.c | 4 ++--
> drivers/video/fbdev/omap/Kconfig | 4 ++--
> drivers/video/fbdev/omap/lcd_ams_delta.c | 2 +-
> drivers/video/fbdev/omap/lcd_dma.c | 3 ++-
> drivers/video/fbdev/omap/lcd_inn1510.c | 2 +-
> drivers/video/fbdev/omap/lcd_osk.c | 4 ++--
> drivers/video/fbdev/omap/lcdc.c | 2 ++
> drivers/video/fbdev/omap/omapfb_main.c | 3 +--
> drivers/video/fbdev/omap/sossi.c | 1 +
> 10 files changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 8b081d61773e..195c71130827 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -213,8 +213,8 @@ config BACKLIGHT_LOCOMO
>
> config BACKLIGHT_OMAP1
> tristate "OMAP1 PWL-based LCD Backlight"
> - depends on ARCH_OMAP1
> - default y
> + depends on ARCH_OMAP1 || COMPILE_TEST
> + default ARCH_OMAP1
> help
> This driver controls the LCD backlight level and power for
> the PWL module of OMAP1 processors. Say Y if your board
> diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
> index 74263021b1b3..69a49384b3de 100644
> --- a/drivers/video/backlight/omap1_bl.c
> +++ b/drivers/video/backlight/omap1_bl.c
> @@ -14,8 +14,8 @@
> #include <linux/slab.h>
> #include <linux/platform_data/omap1_bl.h>
>
> -#include <mach/hardware.h>
> -#include <mach/mux.h>
> +#include <linux/soc/ti/omap1-io.h>
> +#include <linux/soc/ti/omap1-mux.h>
>
> #define OMAPBL_MAX_INTENSITY 0xff
>
> diff --git a/drivers/video/fbdev/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
> index df2a5d0d4aa2..b1786cf1b486 100644
> --- a/drivers/video/fbdev/omap/Kconfig
> +++ b/drivers/video/fbdev/omap/Kconfig
> @@ -2,7 +2,7 @@
> config FB_OMAP
> tristate "OMAP frame buffer support"
> depends on FB
> - depends on ARCH_OMAP1
> + depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
> select FB_CFB_FILLRECT
> select FB_CFB_COPYAREA
> select FB_CFB_IMAGEBLIT
> @@ -42,7 +42,7 @@ config FB_OMAP_LCD_MIPID
>
> config FB_OMAP_LCD_H3
> bool "TPS65010 LCD controller on OMAP-H3"
> - depends on MACH_OMAP_H3
> + depends on MACH_OMAP_H3 || COMPILE_TEST
> depends on TPS65010=y
> default y
> help
> diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
> index 8e54aae544a0..da2e32615abe 100644
> --- a/drivers/video/fbdev/omap/lcd_ams_delta.c
> +++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
> @@ -14,7 +14,7 @@
> #include <linux/gpio/consumer.h>
> #include <linux/lcd.h>
>
> -#include <mach/hardware.h>
> +#include <linux/soc/ti/omap1-io.h>
>
> #include "omapfb.h"
>
> diff --git a/drivers/video/fbdev/omap/lcd_dma.c b/drivers/video/fbdev/omap/lcd_dma.c
> index 867a63c06f42..f85817635a8c 100644
> --- a/drivers/video/fbdev/omap/lcd_dma.c
> +++ b/drivers/video/fbdev/omap/lcd_dma.c
> @@ -25,7 +25,8 @@
>
> #include <linux/omap-dma.h>
>
> -#include <mach/hardware.h>
> +#include <linux/soc/ti/omap1-soc.h>
> +#include <linux/soc/ti/omap1-io.h>
>
> #include "lcdc.h"
> #include "lcd_dma.h"
> diff --git a/drivers/video/fbdev/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
> index 37ed0c14aa5a..bb915637e9b6 100644
> --- a/drivers/video/fbdev/omap/lcd_inn1510.c
> +++ b/drivers/video/fbdev/omap/lcd_inn1510.c
> @@ -10,7 +10,7 @@
> #include <linux/platform_device.h>
> #include <linux/io.h>
>
> -#include <mach/hardware.h>
> +#include <linux/soc/ti/omap1-soc.h>
>
> #include "omapfb.h"
>
> diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
> index 5d5762128c8d..8168ba0d47fd 100644
> --- a/drivers/video/fbdev/omap/lcd_osk.c
> +++ b/drivers/video/fbdev/omap/lcd_osk.c
> @@ -11,8 +11,8 @@
> #include <linux/platform_device.h>
> #include <linux/gpio.h>
>
> -#include <mach/hardware.h>
> -#include <mach/mux.h>
> +#include <linux/soc/ti/omap1-io.h>
> +#include <linux/soc/ti/omap1-mux.h>
>
> #include "omapfb.h"
>
> diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> index 65953b7fbdb9..3af758f12afd 100644
> --- a/drivers/video/fbdev/omap/lcdc.c
> +++ b/drivers/video/fbdev/omap/lcdc.c
> @@ -17,6 +17,8 @@
> #include <linux/clk.h>
> #include <linux/gfp.h>
>
> +#include <linux/soc/ti/omap1-io.h>
> +#include <linux/soc/ti/omap1-soc.h>
> #include <linux/omap-dma.h>
>
> #include <asm/mach-types.h>
> diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
> index dc06057de91d..af73a3f9ac53 100644
> --- a/drivers/video/fbdev/omap/omapfb_main.c
> +++ b/drivers/video/fbdev/omap/omapfb_main.c
> @@ -19,8 +19,7 @@
>
> #include <linux/omap-dma.h>
>
> -#include <mach/hardware.h>
> -
> +#include <linux/soc/ti/omap1-soc.h>
> #include "omapfb.h"
> #include "lcdc.h"
>
> diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> index ade9d452254c..6b99d89fbe6e 100644
> --- a/drivers/video/fbdev/omap/sossi.c
> +++ b/drivers/video/fbdev/omap/sossi.c
> @@ -13,6 +13,7 @@
> #include <linux/interrupt.h>
>
> #include <linux/omap-dma.h>
> +#include <linux/soc/ti/omap1-io.h>
>
> #include "omapfb.h"
> #include "lcd_dma.h"
Powered by blists - more mailing lists