| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190809152510.GA23265@ravnborg.org>
Date: Fri, 9 Aug 2019 17:25:10 +0200
From: Sam Ravnborg <sam@...nborg.org>
To: Bogdan Togorean <bogdan.togorean@...log.com>
Cc: dri-devel@...ts.freedesktop.org, airlied@...ux.ie, daniel@...ll.ch,
robh+dt@...nel.org, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com, gregkh@...uxfoundation.org,
allison@...utok.net, tglx@...utronix.de, matt.redfearn@...nci.com,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] drm: bridge: adv7511: Add support for ADV7535
Hi Bogdan.
This patch triggered a few general comments.
> --- a/drivers/gpu/drm/bridge/adv7511/Makefile
> +++ b/drivers/gpu/drm/bridge/adv7511/Makefile
> @@ -2,5 +2,5 @@
> adv7511-y := adv7511_drv.o
> adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
> adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
> -adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
> +adv7511-$(CONFIG_DRM_I2C_ADV753x) += adv7533.o
> obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index 52b2adfdc877..38288c3c3c53 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -91,6 +91,7 @@
> #define ADV7511_REG_ARC_CTRL 0xdf
> #define ADV7511_REG_CEC_I2C_ADDR 0xe1
> #define ADV7511_REG_CEC_CTRL 0xe2
> +#define ADV7511_REG_SUPPLY_SELECT 0xe4
> #define ADV7511_REG_CHIP_ID_HIGH 0xf5
> #define ADV7511_REG_CHIP_ID_LOW 0xf6
>
> @@ -320,6 +321,7 @@ struct adv7511_video_config {
> enum adv7511_type {
> ADV7511,
> ADV7533,
> + ADV7535,
> };
>
> #define ADV7511_MAX_ADDRS 3
> @@ -393,7 +395,7 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
> }
> #endif
>
> -#ifdef CONFIG_DRM_I2C_ADV7533
> +#ifdef CONFIG_DRM_I2C_ADV753x
> void adv7533_dsi_power_on(struct adv7511 *adv);
> void adv7533_dsi_power_off(struct adv7511 *adv);
> void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
The else part here define dummy functions.
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index f6d2681f6927..b1501344df3e 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> */
> regcache_sync(adv7511->regmap);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_dsi_power_on(adv7511);
In the driver we check for adv7511->type - and call
adv7533_dsi_power_on() only for the two types where we have this
function defined.
A simpler approach would be to always call adv7533_dsi_power_on(), and
let the existing logic pick up the right version.
The dummy version should then return 0 to say OK.
Same goes for several places below.
> adv7511->powered = true;
> }
> @@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
> static void adv7511_power_off(struct adv7511 *adv7511)
> {
> __adv7511_power_off(adv7511);
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_dsi_power_off(adv7511);
> adv7511->powered = false;
> }
> @@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
> regmap_update_bits(adv7511->regmap, 0x17,
> 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_mode_set(adv7511, adj_mode);
>
> drm_mode_copy(&adv7511->curr_mode, adj_mode);
> @@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> &adv7511_connector_helper_funcs);
> drm_connector_attach_encoder(&adv->connector, bridge->encoder);
>
> - if (adv->type == ADV7533)
> + if (adv->type == ADV7533 || adv->type == ADV7535)
> ret = adv7533_attach_dsi(adv);
>
> if (adv->i2c_main->irq)
> @@ -903,6 +903,7 @@ static const char * const adv7511_supply_names[] = {
> "dvdd-3v",
> };
>
> +/* The order of entries is important. If changed update hardcoded indices */
> static const char * const adv7533_supply_names[] = {
> "avdd",
> "dvdd",
> @@ -952,7 +953,7 @@ static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
> struct i2c_client *i2c = to_i2c_client(dev);
> struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> reg -= ADV7533_REG_CEC_OFFSET;
>
> switch (reg) {
> @@ -994,7 +995,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
> goto err;
> }
>
> - if (adv->type == ADV7533) {
> + if (adv->type == ADV7533 || adv->type == ADV7535) {
> ret = adv7533_patch_cec_registers(adv);
> if (ret)
> goto err;
> @@ -1094,8 +1095,9 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> struct adv7511_link_config link_config;
> struct adv7511 *adv7511;
> struct device *dev = &i2c->dev;
> + struct regulator *reg_v1p2;
> unsigned int val;
> - int ret;
> + int ret, reg_v1p2_uV;
>
> if (!dev->of_node)
> return -EINVAL;
> @@ -1163,6 +1165,16 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> if (ret)
> goto uninit_regulators;
>
> + if (adv7511->type == ADV7533) {
> + reg_v1p2 = adv7511->supplies[5].consumer;
> + reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
> +
> + if (reg_v1p2_uV == 1200000) {
> + regmap_update_bits(adv7511->regmap,
> + ADV7511_REG_SUPPLY_SELECT, 0x80, 0x80);
> + }
> + }
> +
> adv7511_packet_disable(adv7511, 0xffff);
>
> adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
> @@ -1242,7 +1254,7 @@ static int adv7511_remove(struct i2c_client *i2c)
> {
> struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_detach_dsi(adv7511);
> i2c_unregister_device(adv7511->i2c_cec);
> if (adv7511->cec_clk)
> @@ -1266,8 +1278,9 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
> { "adv7511", ADV7511 },
> { "adv7511w", ADV7511 },
> { "adv7513", ADV7511 },
> -#ifdef CONFIG_DRM_I2C_ADV7533
> +#ifdef CONFIG_DRM_I2C_ADV753x
> { "adv7533", ADV7533 },
> + { "adv7535", ADV7535 },
> #endif
This ifdef may not be needed??
If we did not get this type we will not look it up.
> { }
> };
> @@ -1277,8 +1290,9 @@ static const struct of_device_id adv7511_of_ids[] = {
> { .compatible = "adi,adv7511", .data = (void *)ADV7511 },
> { .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
> { .compatible = "adi,adv7513", .data = (void *)ADV7511 },
> -#ifdef CONFIG_DRM_I2C_ADV7533
> +#ifdef CONFIG_DRM_I2C_ADV753x
> { .compatible = "adi,adv7533", .data = (void *)ADV7533 },
> + { .compatible = "adi,adv7535", .data = (void *)ADV7535 },
> #endif
> { }
> };
Sam
Powered by blists - more mailing lists