| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1565423901-17008-16-git-send-email-yong.wu@mediatek.com>
Date: Sat, 10 Aug 2019 15:58:15 +0800
From: Yong Wu <yong.wu@...iatek.com>
To: Joerg Roedel <joro@...tes.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Robin Murphy <robin.murphy@....com>,
Will Deacon <will@...nel.org>
CC: Rob Herring <robh+dt@...nel.org>,
Evan Green <evgreen@...omium.org>,
Tomasz Figa <tfiga@...gle.com>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<iommu@...ts.linux-foundation.org>, <yong.wu@...iatek.com>,
<youlin.pei@...iatek.com>, Nicolas Boichat <drinkcat@...omium.org>,
<anan.sun@...iatek.com>, Matthias Kaehlcke <mka@...omium.org>,
<cui.zhang@...iatek.com>, <chao.hao@...iatek.com>,
<ming-fan.chen@...iatek.com>
Subject: [PATCH v9 15/21] iommu/mediatek: Add mt8183 IOMMU support
The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.
Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.
Signed-off-by: Yong Wu <yong.wu@...iatek.com>
Reviewed-by: Evan Green <evgreen@...omium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@...il.com>
---
drivers/iommu/mtk_iommu.c | 15 ++++++++++++---
drivers/iommu/mtk_iommu.h | 1 +
drivers/memory/mtk-smi.c | 20 ++++++++++++++++++++
3 files changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 790bad8..550b093 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -28,6 +28,7 @@
#include "mtk_iommu.h"
#define REG_MMU_PT_BASE_ADDR 0x000
+#define MMU_PT_ADDR_MASK GENMASK(31, 7)
#define REG_MMU_INVALIDATE 0x020
#define F_ALL_INVLD 0x2
@@ -339,7 +340,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
/* Update the pgtable base address register of the M4U HW */
if (!data->m4u_dom) {
data->m4u_dom = dom;
- writel(dom->cfg.arm_v7s_cfg.ttbr[0],
+ writel(dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
data->base + REG_MMU_PT_BASE_ADDR);
}
@@ -710,6 +711,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
{
struct mtk_iommu_data *data = dev_get_drvdata(dev);
struct mtk_iommu_suspend_reg *reg = &data->reg;
+ struct mtk_iommu_domain *m4u_dom = data->m4u_dom;
void __iomem *base = data->base;
int ret;
@@ -725,8 +727,8 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
- if (data->m4u_dom)
- writel(data->m4u_dom->cfg.arm_v7s_cfg.ttbr[0],
+ if (m4u_dom)
+ writel(m4u_dom->cfg.arm_v7s_cfg.ttbr[0] & MMU_PT_ADDR_MASK,
base + REG_MMU_PT_BASE_ADDR);
return 0;
}
@@ -751,9 +753,16 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
.larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */
};
+static const struct mtk_iommu_plat_data mt8183_data = {
+ .m4u_plat = M4U_MT8183,
+ .reset_axi = true,
+ .larbid_remap = {0, 4, 5, 6, 7, 2, 3, 1},
+};
+
static const struct of_device_id mtk_iommu_of_ids[] = {
{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
+ { .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
{}
};
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 973d6e0..6b1f833 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -30,6 +30,7 @@ enum mtk_iommu_plat {
M4U_MT2701,
M4U_MT2712,
M4U_MT8173,
+ M4U_MT8183,
};
struct mtk_iommu_plat_data {
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 53bd379..3dd05de 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -277,6 +277,13 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
.larb_direct_to_common_mask = BIT(8) | BIT(9), /* bdpsys */
};
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
+ .has_gals = true,
+ .config_port = mtk_smi_larb_config_port_gen2_general,
+ .larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
+ /* IPU0 | IPU1 | CCU */
+};
+
static const struct of_device_id mtk_smi_larb_of_ids[] = {
{
.compatible = "mediatek,mt8173-smi-larb",
@@ -290,6 +297,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
.compatible = "mediatek,mt2712-smi-larb",
.data = &mtk_smi_larb_mt2712
},
+ {
+ .compatible = "mediatek,mt8183-smi-larb",
+ .data = &mtk_smi_larb_mt8183
+ },
{}
};
@@ -383,6 +394,11 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
.gen = MTK_SMI_GEN2,
};
+static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
+ .gen = MTK_SMI_GEN2,
+ .has_gals = true,
+};
+
static const struct of_device_id mtk_smi_common_of_ids[] = {
{
.compatible = "mediatek,mt8173-smi-common",
@@ -396,6 +412,10 @@ static int mtk_smi_larb_remove(struct platform_device *pdev)
.compatible = "mediatek,mt2712-smi-common",
.data = &mtk_smi_common_gen2,
},
+ {
+ .compatible = "mediatek,mt8183-smi-common",
+ .data = &mtk_smi_common_mt8183,
+ },
{}
};
--
1.9.1
Powered by blists - more mailing lists