[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <lsq.1565469607.308764277@decadent.org.uk>
Date: Sat, 10 Aug 2019 21:40:07 +0100
From: Ben Hutchings <ben@...adent.org.uk>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
CC: akpm@...ux-foundation.org, Denis Kirjanov <kda@...ux-powerpc.org>,
"Marco Felsch" <m.felsch@...gutronix.de>,
"Christian Hemp" <c.hemp@...tec.de>,
"Shawn Guo" <shawnguo@...nel.org>,
"Stefan Christ" <s.christ@...tec.de>
Subject: [PATCH 3.16 033/157] ARM: dts: pfla02: increase phy reset duration
3.16.72-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Marco Felsch <m.felsch@...gutronix.de>
commit 032f85c9360fb1a08385c584c2c4ed114b33c260 upstream.
Increase the reset duration to ensure correct phy functionality. The
reset duration is taken from barebox commit 52fdd510de ("ARM: dts:
pfla02: use long enough reset for ethernet phy"):
Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a
small percentage of modules have 'transmission timeouts' errors like
barebox@...tec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0
warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3
eth0: 1000Mbps full duplex link detected
eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
T eth0: transmission timeout
Cc: Stefan Christ <s.christ@...tec.de>
Cc: Christian Hemp <c.hemp@...tec.de>
Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
Fixes: 3180f956668e ("ARM: dts: Phytec imx6q pfla02 and pbab01 support")
Signed-off-by: Shawn Guo <shawnguo@...nel.org>
Signed-off-by: Ben Hutchings <ben@...adent.org.uk>
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -302,6 +302,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
+ phy-reset-duration = <10>; /* in msecs */
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
status = "disabled";
};
Powered by blists - more mailing lists