[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190811203144.5999-1-peron.clem@gmail.com>
Date: Sun, 11 Aug 2019 22:31:41 +0200
From: Clément Péron <peron.clem@...il.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
Clément Péron <peron.clem@...il.com>
Subject: [PATCH v5 0/3] Allwinner H6 SPDIF support
Allwinner H6 SoC has a SPDIF controller called One Wire Audio (OWA) which
is different from the previous H3 generation and not compatible.
Difference are an increase of fifo sizes, some memory mapping are different
and there is now the possibility to output the master clock on a pin.
Actually all these features are unused and only a bit for flushing the TX
fifo is required.
Changes since v4:
- rename audio card name to sun50i-h6-spdif
- drop patches already merged
Changes since v3:
- rename reg_fctl_ftx to val_fctl_ftx
- rebase this series on sound-next
- fix dt-bindings due to change in sound-next
- change node name sound_spdif to sound-spdif
Changes since v2:
- Split quirks and H6 support patch
- Add specific section for quirks comment
Changes since v1:
- Remove H3 compatible
- Add TX fifo bit flush quirks
- Add H6 bindings in SPDIF driver
Clément Péron (3):
arm64: dts: allwinner: Add SPDIF node for Allwinner H6
arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
arm64: defconfig: Enable Sun4i SPDIF module
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 4 ++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 38 +++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
3 files changed, 43 insertions(+)
--
2.20.1
Powered by blists - more mailing lists