[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190812224217.12423-1-nicoleotsuka@gmail.com>
Date: Mon, 12 Aug 2019 15:42:17 -0700
From: Nicolin Chen <nicoleotsuka@...il.com>
To: adrian.hunter@...el.com, ulf.hansson@...aro.org,
thierry.reding@...il.com, jonathanh@...dia.com
Cc: linux-mmc@...r.kernel.org, linux-tegra@...r.kernel.org,
linux-kernel@...r.kernel.org, vdumpa@...dia.com
Subject: [PATCH] mmc: tegra: Implement enable_dma() to set dma_mask
Commit 68481a7e1c84 ("mmc: tegra: Mark 64 bit dma broken on Tegra186")
added a SDHCI_QUIRK2_BROKEN_64_BIT_DMA flag to let sdhci core fallback
to 32-bit DMA so as to fit the 40-bit addressing on Tegra186. However,
there's a common way, being mentioned in sdhci.c file, to set dma_mask
via enable_dma() callback in the device driver directly.
So this patch implements an enable_dma() callback in the sdhci-tegra,
in order to set an accurate DMA_BIT_MASK, other than 32-bit or 64-bit.
Signed-off-by: Nicolin Chen <nicoleotsuka@...il.com>
---
drivers/mmc/host/sdhci-tegra.c | 28 +++++++++++++++++++---------
1 file changed, 19 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index f4d4761cf20a..23289adb78d6 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -16,6 +16,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
+#include <linux/dma-mapping.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
@@ -104,6 +105,7 @@
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
+ u64 dma_bit_mask;
u32 nvquirks;
u8 min_tap_delay;
u8 max_tap_delay;
@@ -749,6 +751,19 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
}
}
+static int tegra_sdhci_enable_dma(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+ const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
+ struct device *dev = mmc_dev(host->mmc);
+
+ if (soc_data->dma_bit_mask)
+ return dma_set_mask_and_coherent(dev, soc_data->dma_bit_mask);
+
+ return 0;
+}
+
static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1370,6 +1385,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = {
.write_l = tegra_sdhci_writel,
.set_clock = tegra_sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
+ .enable_dma = tegra_sdhci_enable_dma,
.reset = tegra_sdhci_reset,
.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
.voltage_switch = tegra_sdhci_voltage_switch,
@@ -1384,20 +1400,13 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
- /* SDHCI controllers on Tegra186 support 40-bit addressing.
- * IOVA addresses are 48-bit wide on Tegra186.
- * With 64-bit dma mask used for SDHCI, accesses can
- * be broken. Disable 64-bit dma, which would fall back
- * to 32-bit dma mask. Ideally 40-bit dma mask would work,
- * But it is not supported as of now.
- */
- SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra186_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
.pdata = &sdhci_tegra186_pdata,
+ .dma_bit_mask = DMA_BIT_MASK(40),
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
@@ -1410,6 +1419,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
static const struct sdhci_tegra_soc_data soc_data_tegra194 = {
.pdata = &sdhci_tegra186_pdata,
+ .dma_bit_mask = DMA_BIT_MASK(39),
.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
NVQUIRK_HAS_PADCALIB |
NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
--
2.17.1
Powered by blists - more mailing lists