[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3f31cde6-8faf-f9a0-626e-dc995260a640@gmail.com>
Date: Mon, 12 Aug 2019 09:53:33 +0100
From: Ian Arkver <ian.arkver.dev@...il.com>
To: Steve Longerbeam <slongerbeam@...il.com>,
linux-media@...r.kernel.org
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] media: docs-rst: Clarify duration of LP-11 mode
Hi Steve,
On 11/08/2019 18:36, Steve Longerbeam wrote:
> Add a sentence that makes it more clear when the CSI-2 transmitter
> must, if possible, exit LP-11 mode. That is, maintain LP-11 mode
> until stream on, at which point the transmitter activates the clock
> lane and transition to HS mode.
>
> Signed-off-by: Steve Longerbeam <slongerbeam@...il.com>
> ---
> Documentation/media/kapi/csi2.rst | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/media/kapi/csi2.rst b/Documentation/media/kapi/csi2.rst
> index a7e75e2eba85..6cd1d4b0df17 100644
> --- a/Documentation/media/kapi/csi2.rst
> +++ b/Documentation/media/kapi/csi2.rst
> @@ -49,9 +49,13 @@ where
>
> The transmitter drivers must, if possible, configure the CSI-2
> transmitter to *LP-11 mode* whenever the transmitter is powered on but
> -not active. Some transmitters do this automatically but some have to
> -be explicitly programmed to do so, and some are unable to do so
> -altogether due to hardware constraints.
> +not active, and maintain *LP-11 mode* until stream on. Only until
s/until/at/ perhaps?
Regards,
Ian
> +stream on should the transmitter activate the clock on the clock lane
> +and transition to *HS mode*.
> +
> +Some transmitters do this automatically but some have to be explicitly
> +programmed to do so, and some are unable to do so altogether due to
> +hardware constraints.
>
> Stopping the transmitter
> ^^^^^^^^^^^^^^^^^^^^^^^^
>
Powered by blists - more mailing lists