[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <MN2PR02MB64001BE4B002AE2AE5790FC3DCD30@MN2PR02MB6400.namprd02.prod.outlook.com>
Date: Mon, 12 Aug 2019 09:07:48 +0000
From: Appana Durga Kedareswara Rao <appanad@...inx.com>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
"wg@...ndegger.com" <wg@...ndegger.com>,
"davem@...emloft.net" <davem@...emloft.net>,
Michal Simek <michals@...inx.com>
CC: "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Venkatesh Yadav Abbarapu <VABBARAP@...inx.com>
Subject: RE: [PATCH 1/5] can: xilinx_can: defer the probe if clock is not
found
Hi Marc,
Thanks for the review...
<Snip>
> On 8/12/19 9:28 AM, Appana Durga Kedareswara rao wrote:
> > From: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@...inx.com>
> >
> > It's not always the case that clock is already available when can
> > driver get probed at the first time, e.g. the clock is provided by
> > clock wizard which may be probed after can driver. So let's defer the
> > probe when devm_clk_get() call fails and give it chance to try later.
>
> Technically the patch changes the error message to not being printed in case
> of EPROBE_DEFER. This patch doesn't change any behaviour apart from that.
> Please adjust the patch description accordingly.
Sure will fix in v2...
Regards,
Kedar.
>
> Marc
>
> >
> > Signed-off-by: Venkatesh Yadav Abbarapu
> > <venkatesh.abbarapu@...inx.com>
> > Signed-off-by: Michal Simek <michal.simek@...inx.com>
> > ---
> > drivers/net/can/xilinx_can.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/can/xilinx_can.c
> > b/drivers/net/can/xilinx_can.c index bd95cfa..ac175ab 100644
> > --- a/drivers/net/can/xilinx_can.c
> > +++ b/drivers/net/can/xilinx_can.c
> > @@ -1791,7 +1791,8 @@ static int xcan_probe(struct platform_device
> *pdev)
> > /* Getting the CAN can_clk info */
> > priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
> > if (IS_ERR(priv->can_clk)) {
> > - dev_err(&pdev->dev, "Device clock not found.\n");
> > + if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER)
> > + dev_err(&pdev->dev, "Device clock not found.\n");
> > ret = PTR_ERR(priv->can_clk);
> > goto err_free;
> > }
> >
>
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Industrial Linux Solutions | Phone: +49-231-2826-924 |
> Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
> Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Powered by blists - more mailing lists