linux-kernel - Re: [PATCH V15 00/13] PCI: tegra: Add Tegra194 PCIe support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190812102519.GN8903@ulmo>
Date:   Mon, 12 Aug 2019 12:25:19 +0200
From:   Thierry Reding <thierry.reding@...il.com>
To:     Vidya Sagar <vidyas@...dia.com>
Cc:     lorenzo.pieralisi@....com, bhelgaas@...gle.com, robh+dt@...nel.org,
        mark.rutland@....com, jonathanh@...dia.com, kishon@...com,
        catalin.marinas@....com, will.deacon@....com, jingoohan1@...il.com,
        gustavo.pimentel@...opsys.com, digetx@...il.com,
        mperttunen@...dia.com, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org, linux-tegra@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        kthota@...dia.com, mmaddireddy@...dia.com, sagar.tv@...il.com
Subject: Re: [PATCH V15 00/13] PCI: tegra: Add Tegra194 PCIe support

On Fri, Aug 09, 2019 at 10:15:56AM +0530, Vidya Sagar wrote:
> Tegra194 has six PCIe controllers based on Synopsys DesignWare core.
> There are two Universal PHY (UPHY) blocks with each supporting 12(HSIO:
> Hisg Speed IO) and 8(NVHS: NVIDIA High Speed) lanes respectively.
> Controllers:0~4 use UPHY lanes from HSIO brick whereas Controller:5 uses
> UPHY lanes from NVHS brick. Lane mapping in HSIO UPHY brick to each PCIe
> controller (0~4) is controlled in XBAR module by BPMP-FW. Since PCIe
> core has PIPE interface, a glue module called PIPE-to-UPHY (P2U) is used
> to connect each UPHY lane (applicable to both HSIO and NVHS UPHY bricks)
> to PCIe controller
> This patch series
> - Adds support for P2U PHY driver
> - Adds support for PCIe host controller
> - Adds device tree nodes each PCIe controllers
> - Enables nodes applicable to p2972-0000 platform
> - Adds helper APIs in Designware core driver to get capability regs offset
> - Adds defines for new feature registers of PCIe spec revision 4
> - Makes changes in DesignWare core driver to get Tegra194 PCIe working
> 
> Testing done on P2972-0000 platform
> - Able to get PCIe link up with on-board Marvel eSATA controller
> - Able to get PCIe link up with NVMe cards connected to M.2 Key-M slot
> - Able to do data transfers with both SATA drives and NVMe cards
> - Able to perform suspend-resume sequence

Do you happen to have a patch for P2972-0000 PCI support? I don't see it
in this series.

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)