linux-kernel - Re: [PATCH v4 00/11] media: hantro: Add support for H264 decoding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1565606519.5017.5.camel@pengutronix.de>
Date:   Mon, 12 Aug 2019 12:41:59 +0200
From:   Philipp Zabel <p.zabel@...gutronix.de>
To:     Ezequiel Garcia <ezequiel@...labora.com>,
        linux-media@...r.kernel.org
Cc:     kernel@...labora.com,
        Nicolas Dufresne <nicolas.dufresne@...labora.com>,
        Tomasz Figa <tfiga@...omium.org>,
        linux-rockchip@...ts.infradead.org,
        Heiko Stuebner <heiko@...ech.de>,
        Jonas Karlman <jonas@...boo.se>,
        Boris Brezillon <boris.brezillon@...labora.com>,
        Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
        Alexandre Courbot <acourbot@...omium.org>,
        fbuergisser@...omium.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 00/11] media: hantro: Add support for H264 decoding

Hi Ezequiel,

On Thu, 2019-08-08 at 07:34 -0300, Ezequiel Garcia wrote:
> This series is consolidating the two recent H264 series submitted
> by Boris [1] [2]. Given some patches from [2]  have been merged (namely,
> helpers for the Hantro driver), the series contains the remanining
> bits required to support H264 on Hantro G1 VPU.
> 
> * Patch 1 adds support for the sort_r() variant and has
>   been posted separately by Rasmus. It would be good to merge this patch
>   via the media tree, ideally as soon as possible, to avoid the
>   synchronisation burden that might appear if we decide to delay it.
> 
> * Patch 2 to 4 extends the H264 uAPI, introducing frame-based vs slice-based
>   decoding granularity, and also support for different NALU start codes.
>   Currently, Annex B and no start codes are the supported options.
> 
>   With the introduction of the start code control, the H264 parsed
>   slices pixel format should be renamed, dropping the _RAW suffix,
>   which is now meaningless.
> 
> * Patch 5 removes the P0/B0/B1 ref lists from the decode_params control.
>   These lists are no longer needed since we build them on the
>   kernel side based on the DPB.
> 
> * Patch 6 and 7 exposes the proper decoding mode and start code
>   on the cedrus driver. The driver functionality is not changed,
>   and only the Cedrus support is now being properly exposed to
>   userspace.
> 
> * Patch 8 is needed to properly propagate the OUTPUT buffer timestamp to
>   the CAPTURE buffer one, which is required for intra-frame references.
> 
> * Patches 9 to 11 adds H264 support for Hantro G1 and then enable
>   H264 decoding on RK3288.
> 
> This series has been tested using MPV/Ffmpeg, on Rockchip RK3288
> for Hantro and Allwinner H3 boards for Cedrus.

Tested-by: Philipp Zabel <p.zabel@...gutronix.de>

on i.MX8MQ EVK using [1], so I effectively patches 1-5 and 8-10, with
your FFmpeg modifications [2].

[1] git://git.pengutronix.de/git/pza/linux.git hantro/imx8m-wip
[2] https://gitlab.collabora.com/ezequiel/ffmpeg stateless-mpeg2-vp8-
h264-v4

regards
Philipp