lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190812142105.1995-1-philippe.schenker@toradex.com>
Date:   Mon, 12 Aug 2019 14:21:14 +0000
From:   Philippe Schenker <philippe.schenker@...adex.com>
To:     Marcel Ziswiler <marcel.ziswiler@...adex.com>,
        Max Krummenacher <max.krummenacher@...adex.com>,
        "stefan@...er.ch" <stefan@...er.ch>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Michal Vokáč <michal.vokac@...ft.com>,
        Fabio Estevam <festevam@...il.com>
CC:     Philippe Schenker <philippe.schenker@...adex.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        Sascha Hauer <s.hauer@...gutronix.de>
Subject: [PATCH v4 00/21] Common patches from downstream development


This patchset holds some common changes that were never upstreamed.
With latest downstream kernel upgrade, I took the aproach to select
mainline devicetrees and atomically add missing stuff for downstream.

These patches I send here are separated out with changes that also
have a benfit for mainline.

Philippe

Changes in v4:
- Added Marcel Ziswiler's Ack
- Added Marcel Ziswiler's Ack
- Make scl-gpios and sda-gpios (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
- Change commit title to Michal's suggestion
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Add Marcel Ziswiler's Ack
- Move can nodes to module deviceteree include imx6ull-colibri.dtsi
- Add Marcel Ziswiler's Ack
- New patch as of the recommendation from Marcel on ML

Changes in v3:
- Add new commit message from Stefan's proposal on ML
- Fix commit message
- Fix commit title to "...imx6-apalis:..."
- New patch to make use of ARM: dts: imx7-colibri: fix 1.8V/UHS support

Changes in v2:
- Deleted touchrevolution downstream stuff
- Use generic node name
- Better comment
- Changed commit title to '...imx6qdl-apalis:...'
- Deleted touchrevolution downstream stuff
- Use generic node name
- Put a better comment in there
- Commit title
- Removed f0710a, that is downstream only
- Changed to generic node name
- Better comment

Igor Opaniuk (1):
  ARM: dts: imx6qdl-colibri.dtsi: UHS-I support for v1.1a hw

Marcel Ziswiler (1):
  ARM: dts: imx7-colibri: make sure module supplies are always on

Max Krummenacher (2):
  ARM: dts: imx6ull-colibri: reduce v_batt current in power off
  ARM: dts: imx6ull: improve can templates

Oleksandr Suvorov (1):
  ARM: dts: imx7-colibri: add recovery for I2C for iMX7

Philippe Schenker (13):
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: Add sleep mode to ethernet
  ARM: dts: imx7-colibri: Add touch controllers
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc
  ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces
  ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards
  ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board
  ARM: dts: imx6ull-colibri: Add sleep mode to fec
  ARM: dts: imx6ull-colibri: Add watchdog
  ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri
  ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board
  ARM: dts: imx7-colibri: Add UHS support to eval board

Stefan Agner (3):
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: add GPIO wakeup key
  ARM: dts: imx7-colibri: fix 1.8V/UHS support

 arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts  |  39 ++++++
 arch/arm/boot/dts/imx6q-apalis-eval.dts       |  13 ++
 arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts |  13 ++
 arch/arm/boot/dts/imx6q-apalis-ixora.dts      |  13 ++
 arch/arm/boot/dts/imx6qdl-apalis.dtsi         |  27 ++++-
 arch/arm/boot/dts/imx6qdl-colibri.dtsi        |  68 ++++++++++-
 .../arm/boot/dts/imx6ull-colibri-eval-v3.dtsi |  38 ++++++
 .../arm/boot/dts/imx6ull-colibri-nonwifi.dtsi |   2 +-
 arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi   |   2 +-
 arch/arm/boot/dts/imx6ull-colibri.dtsi        |  64 +++++++++-
 arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi   |  49 +++++++-
 arch/arm/boot/dts/imx7-colibri.dtsi           | 112 ++++++++++++++++--
 12 files changed, 410 insertions(+), 30 deletions(-)

-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ