[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190812180613.GA18377@infradead.org>
Date: Mon, 12 Aug 2019 11:06:13 -0700
From: Christoph Hellwig <hch@...radead.org>
To: Stephen Douthit <stephend@...icom-usa.com>
Cc: Dan Williams <dan.j.williams@...el.com>,
Christoph Hellwig <hch@...radead.org>,
Jens Axboe <axboe@...nel.dk>,
"linux-ide@...r.kernel.org" <linux-ide@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] ata: ahci: Lookup PCS register offset based on PCI
device ID
On Mon, Aug 12, 2019 at 05:49:29PM +0000, Stephen Douthit wrote:
> Does anyone know the background of the original PCS workaround?
Based on a few git-blame iterations on history.git the original PCS
handling (just when initializing) goes back to this BK commit:
--
>From c0835b838e76c9500facad05dc305170a1a577a8 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jgarzik@...ox.com>
Date: Thu, 14 Oct 2004 16:11:44 -0400
Subject: [libata ahci] fix several bugs
* PCI IDs from test version didn't make it into mainline... doh
* do all command setup in ->qc_prep
* phy_reset routine that does signature check
* check SATA phy for errors
* reset hardware from scratch, in case card BIOS didn't run
* implement staggered spinup by default
* adding additional debugging output
---
drivers/scsi/ahci.c | 150 ++++++++++++++++++++++++++++++++------------
1 file changed, 109 insertions(+), 41 deletions(-)
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index e2fdeb8b857e..408ecc527b59 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -38,7 +38,7 @@
#include <asm/io.h>
#define DRV_NAME "ahci"
-#define DRV_VERSION "0.10"
+#define DRV_VERSION "0.11"
enum {
@@ -52,6 +52,7 @@ enum {
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ +
AHCI_RX_FIS_SZ,
AHCI_IRQ_ON_SG = (1 << 31),
+ AHCI_CMD_ATAPI = (1 << 5),
AHCI_CMD_WRITE = (1 << 6),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
@@ -82,8 +83,10 @@ enum {
PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
PORT_CMD = 0x18, /* port command */
PORT_TFDATA = 0x20, /* taskfile data */
+ PORT_SIG = 0x24, /* device TF signature */
PORT_CMD_ISSUE = 0x38, /* command issue */
PORT_SCR = 0x28, /* SATA phy register block */
+ PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
@@ -161,9 +164,9 @@ struct ahci_port_priv {
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static void ahci_dma_setup(struct ata_queued_cmd *qc);
-static void ahci_dma_start(struct ata_queued_cmd *qc);
+static int ahci_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
+static void ahci_phy_reset(struct ata_port *ap);
static void ahci_irq_clear(struct ata_port *ap);
static void ahci_eng_timeout(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
@@ -202,13 +205,12 @@ static struct ata_port_operations ahci_ops = {
.tf_read = ahci_tf_read,
.check_status = ahci_check_status,
.exec_command = ahci_exec_command,
+ .dev_select = ata_noop_dev_select,
- .phy_reset = sata_phy_reset,
+ .phy_reset = ahci_phy_reset,
- .bmdma_setup = ahci_dma_setup,
- .bmdma_start = ahci_dma_start,
.qc_prep = ahci_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_issue = ahci_qc_issue,
.eng_timeout = ahci_eng_timeout,
@@ -236,7 +238,9 @@ static struct ata_port_info ahci_port_info[] = {
};
static struct pci_device_id ahci_pci_tbl[] = {
- { PCI_VENDOR_ID_INTEL, 0x0000, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ { PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci },
+ { PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_ahci },
{ } /* terminate list */
};
@@ -292,6 +296,7 @@ static int ahci_port_start(struct ata_port *ap)
rc = -ENOMEM;
goto err_out_kfree;
}
+ memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
pp->rx_fis = mem;
pp->rx_fis_dma = mem_dma;
@@ -302,7 +307,7 @@ static int ahci_port_start(struct ata_port *ap)
pp->cmd_tbl = mem;
pp->cmd_tbl_dma = mem_dma;
- mem2 = mem + 128;
+ mem2 = mem + 0x80;
pp->cmd_tbl_sg = mem2;
mem += AHCI_CMD_TBL_SZ;
@@ -398,6 +403,29 @@ static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg_in,
writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
+static void ahci_phy_reset(struct ata_port *ap)
+{
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ struct ata_taskfile tf;
+ struct ata_device *dev = &ap->device[0];
+ u32 tmp;
+
+ __sata_phy_reset(ap);
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ tmp = readl(port_mmio + PORT_SIG);
+ tf.lbah = (tmp >> 24) & 0xff;
+ tf.lbam = (tmp >> 16) & 0xff;
+ tf.lbal = (tmp >> 8) & 0xff;
+ tf.nsect = (tmp) & 0xff;
+
+ dev->class = ata_dev_classify(&tf);
+ if (!ata_dev_present(dev))
+ ata_port_disable(ap);
+}
+
static u8 ahci_check_status(struct ata_port *ap)
{
void *mmio = (void *) ap->ioaddr.cmd_addr;
@@ -424,7 +452,7 @@ static void ahci_fill_sg(struct ata_queued_cmd *qc)
pp->cmd_tbl_sg[i].addr = cpu_to_le32(addr & 0xffffffff);
pp->cmd_tbl_sg[i].addr_hi = cpu_to_le32((addr >> 16) >> 16);
- pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len);
+ pp->cmd_tbl_sg[i].flags_size = cpu_to_le32(sg_len - 1);
}
}
@@ -442,6 +470,19 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc)
opts = (qc->n_elem << 16) | cmd_fis_len;
if (qc->tf.flags & ATA_TFLAG_WRITE)
opts |= AHCI_CMD_WRITE;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ case ATA_PROT_ATAPI_DMA:
+ opts |= AHCI_CMD_ATAPI;
+ break;
+
+ default:
+ /* do nothing */
+ break;
+ }
+
pp->cmd_slot->opts = cpu_to_le32(opts);
pp->cmd_slot->status = 0;
pp->cmd_slot->tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
@@ -547,11 +588,12 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
{
void *mmio = ap->host_set->mmio_base;
void *port_mmio = ahci_port_base(mmio, ap->port_no);
- u32 status, ci;
+ u32 status, serr, ci;
+
+ serr = readl(port_mmio + PORT_SCR_ERR);
+ writel(serr, port_mmio + PORT_SCR_ERR);
status = readl(port_mmio + PORT_IRQ_STAT);
- if (!status)
- return 0;
writel(status, port_mmio + PORT_IRQ_STAT);
ci = readl(port_mmio + PORT_CMD_ISSUE);
@@ -624,18 +666,15 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
return IRQ_RETVAL(handled);
}
-static void ahci_dma_setup(struct ata_queued_cmd *qc)
-{
- /* do nothing... for now */
-}
-
-static void ahci_dma_start(struct ata_queued_cmd *qc)
+static int ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void *mmio = (void *) ap->ioaddr.cmd_addr;
writel(1, mmio + PORT_CMD_ISSUE);
readl(mmio + PORT_CMD_ISSUE); /* flush */
+
+ return 0;
}
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
@@ -663,20 +702,30 @@ static void ahci_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
unsigned int port_idx)
{
+ VPRINTK("ENTER, base==0x%lx, port_idx %u\n", base, port_idx);
base = ahci_port_base_ul(base, port_idx);
+ VPRINTK("base now==0x%lx\n", base);
port->cmd_addr = base;
port->scr_addr = base + PORT_SCR;
+
+ VPRINTK("EXIT\n");
}
static int ahci_host_init(struct ata_probe_ent *probe_ent)
{
struct ahci_host_priv *hpriv = probe_ent->private_data;
struct pci_dev *pdev = probe_ent->pdev;
- void *mmio = probe_ent->mmio_base;
- u32 tmp;
- unsigned int i, using_dac;
+ void __iomem *mmio = probe_ent->mmio_base;
+ u32 tmp, cap_save;
+ u16 tmp16;
+ unsigned int i, j, using_dac;
int rc;
+ void __iomem *port_mmio;
+
+ cap_save = readl(mmio + HOST_CAP);
+ cap_save &= ( (1<<28) | (1<<17) );
+ cap_save |= (1 << 27);
/* global controller reset */
tmp = readl(mmio + HOST_CTL);
@@ -698,23 +747,22 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
return -EIO;
}
- /* make sure we're in AHCI mode, with irq disabled */
- if ((tmp & (HOST_AHCI_EN | HOST_IRQ_EN)) != HOST_AHCI_EN) {
- tmp |= HOST_AHCI_EN;
- tmp &= ~HOST_IRQ_EN;
- writel(tmp, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
- }
- tmp = readl(mmio + HOST_CTL);
- if ((tmp & (HOST_AHCI_EN | HOST_IRQ_EN)) != HOST_AHCI_EN) {
- printk(KERN_ERR DRV_NAME "(%s): AHCI enable failed (0x%x)\n",
- pci_name(pdev), tmp);
- return -EIO;
- }
+ writel(HOST_AHCI_EN, mmio + HOST_CTL);
+ (void) readl(mmio + HOST_CTL); /* flush */
+ writel(cap_save, mmio + HOST_CAP);
+ writel(0xf, mmio + HOST_PORTS_IMPL);
+ (void) readl(mmio + HOST_PORTS_IMPL); /* flush */
+
+ pci_read_config_word(pdev, 0x92, &tmp16);
+ tmp16 |= 0xf;
+ pci_write_config_word(pdev, 0x92, tmp16);
hpriv->cap = readl(mmio + HOST_CAP);
hpriv->port_map = readl(mmio + HOST_PORTS_IMPL);
- probe_ent->n_ports = hpriv->cap & 0x1f;
+ probe_ent->n_ports = (hpriv->cap & 0x1f) + 1;
+
+ VPRINTK("cap 0x%x port_map 0x%x n_ports %d\n",
+ hpriv->cap, hpriv->port_map, probe_ent->n_ports);
using_dac = hpriv->cap & HOST_CAP_64;
if (using_dac &&
@@ -746,18 +794,18 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
}
for (i = 0; i < probe_ent->n_ports; i++) {
- void *port_mmio;
-
if (!(hpriv->port_map & (1 << i)))
continue;
port_mmio = ahci_port_base(mmio, i);
+ VPRINTK("mmio %p port_mmio %p\n", mmio, port_mmio);
ahci_setup_port(&probe_ent->port[i],
(unsigned long) mmio, i);
/* make sure port is not active */
tmp = readl(port_mmio + PORT_CMD);
+ VPRINTK("PORT_CMD 0x%x\n", tmp);
if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
PORT_CMD_FIS_RX | PORT_CMD_START)) {
tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
@@ -772,14 +820,27 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
schedule_timeout((HZ / 2) + 1);
}
+ writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
+
+ j = 0;
+ while (j < 100) {
+ msleep(10);
+ tmp = readl(port_mmio + PORT_SCR_STAT);
+ if ((tmp & 0xf) == 0x3)
+ break;
+ j++;
+ }
+
+ tmp = readl(port_mmio + PORT_SCR_ERR);
+ VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+ writel(tmp, port_mmio + PORT_SCR_ERR);
+
/* ack any pending irq events for this port */
tmp = readl(port_mmio + PORT_IRQ_STAT);
+ VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
- tmp = readl(port_mmio + PORT_SCR_ERR);
- writel(tmp, port_mmio + PORT_SCR_ERR);
-
writel(1 << i, mmio + HOST_IRQ_STAT);
/* set irq mask (enables interrupts) */
@@ -787,7 +848,10 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
}
tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+ tmp = readl(mmio + HOST_CTL);
+ VPRINTK("HOST_CTL 0x%x\n", tmp);
pci_set_master(pdev);
@@ -830,10 +894,12 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
"%u slots %u ports %s Gbps 0x%x impl\n"
,
pci_name(pdev),
+
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
(vers >> 8) & 0xff,
vers & 0xff,
+
((cap >> 8) & 0x1f) + 1,
(cap & 0x1f) + 1,
speed_s,
@@ -872,6 +938,8 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
unsigned int board_idx = (unsigned int) ent->driver_data;
int rc;
+ VPRINTK("ENTER\n");
+
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
--
2.20.1
Powered by blists - more mailing lists