Message-ID: <a0fa05d7-5fc2-071a-f5ab-788662ecc6b2@collabora.com>
Date:   Tue, 13 Aug 2019 09:25:01 -0300
From:   Helen Koike <helen.koike@...labora.com>
To:     Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc:     Shuah Khan <skhan@...uxfoundation.org>,
        André Almeida <andrealmeid@...labora.com>,
        mchehab@...nel.org, hverkuil@...all.nl,
        linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
        kernel@...labora.com
Subject: Re: [PATCH 0/3] Collapse vimc into single monolithic driver



On 8/13/19 6:56 AM, Laurent Pinchart wrote:
> Hi Helen,
> 
> On Mon, Aug 12, 2019 at 08:41:33PM -0300, Helen Koike wrote:
>> On 8/12/19 7:14 PM, Shuah Khan wrote:
>>> On 8/12/19 1:10 PM, Shuah Khan wrote:
>>>> On 8/12/19 12:52 PM, André Almeida wrote:
>>>>> On 8/12/19 11:08 AM, Shuah Khan wrote:
>>>>>> On 8/9/19 9:51 PM, Helen Koike wrote:
>>>>>>> On 8/9/19 9:24 PM, André Almeida wrote:
>>>>>>>> On 8/9/19 9:17 PM, Shuah Khan wrote:
>>>>>>>>> On 8/9/19 5:52 PM, André Almeida wrote:
>>>>>>>>>> On 8/9/19 6:45 PM, Shuah Khan wrote:
>>>>>>>>>>> vimc uses Component API to split the driver into functional
>>>>>>>>>>> components.
>>>>>>>>>>> The real hardware resembles a monolith structure than component and
>>>>>>>>>>> component structure added a level of complexity making it hard to
>>>>>>>>>>> maintain without adding any real benefit.
>>>>>>>>>>>        The sensor is one vimc component that would makes sense to be a
>>>>>>>>>>> separate
>>>>>>>>>>> module to closely align with the real hardware. It would be easier to
>>>>>>>>>>> collapse vimc into single monolithic driver first and then split the
>>>>>>>>>>> sensor off as a separate module.
>>>>>>>>>>>
>>>>>>>>>>> This patch series emoves the component API and makes minimal
>>>>>>>>>>> changes to
>>>>>>>>>>> the code base preserving the functional division of the code
>>>>>>>>>>> structure.
>>>>>>>>>>> Preserving the functional structure allows us to split the sensor off
>>>>>>>>>>> as a separate module in the future.
>>>>>>>>>>>
>>>>>>>>>>> Major design elements in this change are:
>>>>>>>>>>>        - Use existing struct vimc_ent_config and struct
>>>>>>>>>>> vimc_pipeline_config
>>>>>>>>>>>          to drive the initialization of the functional components.
>>>>>>>>>>>        - Make vimc_ent_config global by moving it to vimc.h
>>>>>>>>>>>        - Add two new hooks add and rm to initialize and register,
>>>>>>>>>>> unregister
>>>>>>>>>>>          and free subdevs.
>>>>>>>>>>>        - All component API is now gone and bind and unbind hooks are
>>>>>>>>>>> modified
>>>>>>>>>>>          to do "add" and "rm" with minimal changes to just add and rm
>>>>>>>>>>> subdevs.
>>>>>>>>>>>        - vimc-core's bind and unbind are now register and unregister.
>>>>>>>>>>>        - vimc-core invokes "add" hooks from its
>>>>>>>>>>> vimc_register_devices().
>>>>>>>>>>>          The "add" hooks remain the same and register subdevs. They
>>>>>>>>>>> don't
>>>>>>>>>>>          create platform devices of their own and use vimc's
>>>>>>>>>>> pdev.dev as
>>>>>>>>>>>          their reference device. The "add" hooks save their
>>>>>>>>>>> vimc_ent_device(s)
>>>>>>>>>>>          in the corresponding vimc_ent_config.
>>>>>>>>>>>        - vimc-core invokes "rm" hooks from its unregister to
>>>>>>>>>>> unregister
>>>>>>>>>>> subdevs
>>>>>>>>>>>          and cleanup.
>>>>>>>>>>>        - vimc-core invokes "add" and "rm" hooks with pointer to struct
>>>>>>>>>>> vimc_device
>>>>>>>>>>>          and the corresponding struct vimc_ent_config pointer.
>>>>>>>>>>>        The following configure and stream test works on all devices.
>>>>>>>>>>>             media-ctl -d platform:vimc -V '"Sensor
>>>>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
>>>>>>>>>>> A":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>>>>        media-ctl -d platform:vimc -V '"Sensor
>>>>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>>>>        media-ctl -d platform:vimc -V '"Debayer
>>>>>>>>>>> B":0[fmt:SBGGR8_1X8/640x480]'
>>>>>>>>>>>             v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v
>>>>>>>>>>> width=1920,height=1440
>>>>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v
>>>>>>>>>>> pixelformat=BA81
>>>>>>>>>>>        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v
>>>>>>>>>>> pixelformat=BA81
>>>>>>>>>>>             v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1
>>>>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2
>>>>>>>>>>>        v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3
>>>>>>>>>>>
>>>>>>>>>>> The third patch in the series fixes a general protection fault found
>>>>>>>>>>> when rmmod is done while stream is active.
>>>>>>>>>>
>>>>>>>>>> I applied your patch on top of media_tree/master and I did some
>>>>>>>>>> testing.
>>>>>>>>>> Not sure if I did something wrong, but just adding and removing the
>>>>>>>>>> module generated a kernel panic:
>>>>>>>>>
>>>>>>>>> Thanks for testing.
>>>>>>>>>
>>>>>>>>> Odd. I tested modprobe and rmmod both.I was working on Linux 5.3-rc2.
>>>>>>>>> I will apply these to media latest and work from there. I have to
>>>>>>>>> rebase these on top of the reverts from Lucas and Helen
>>>>>>>>
>>>>>>>> Ok, please let me know if I succeeded to reproduce.
>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ~# modprobe vimc
>>>>>>>>>> ~# rmmod vimc
>>>>>>>>>> [   16.452974] stack segment: 0000 [#1] SMP PTI
>>>>>>>>>> [   16.453688] CPU: 0 PID: 2038 Comm: rmmod Not tainted 5.3.0-rc2+ #36
>>>>>>>>>> [   16.454678] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
>>>>>>>>>> BIOS 1.12.0-20181126_142135-anatol 04/01/2014
>>>>>>>>>> [   16.456191] RIP: 0010:kfree+0x4d/0x240
>>>>>>>>>>
>>>>>>>>>> <registers values...>
>>>>>>>>>>
>>>>>>>>>> [   16.469188] Call Trace:
>>>>>>>>>> [   16.469666]  vimc_remove+0x35/0x90 [vimc]
>>>>>>>>>> [   16.470436]  platform_drv_remove+0x1f/0x40
>>>>>>>>>> [   16.471233]  device_release_driver_internal+0xd3/0x1b0
>>>>>>>>>> [   16.472184]  driver_detach+0x37/0x6b
>>>>>>>>>> [   16.472882]  bus_remove_driver+0x50/0xc1
>>>>>>>>>> [   16.473569]  vimc_exit+0xc/0xca0 [vimc]
>>>>>>>>>> [   16.474231]  __x64_sys_delete_module+0x18d/0x240
>>>>>>>>>> [   16.475036]  do_syscall_64+0x43/0x110
>>>>>>>>>> [   16.475656]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
>>>>>>>>>> [   16.476504] RIP: 0033:0x7fceb8dafa4b
>>>>>>>>>>
>>>>>>>>>> <registers values...>
>>>>>>>>>>
>>>>>>>>>> [   16.484853] Modules linked in: vimc(-) videobuf2_vmalloc
>>>>>>>>>> videobuf2_memops v4l2_tpg videobuf2_v4l2 videobuf2_common
>>>>>>>>>> [   16.486187] ---[ end trace 91e5e0894e254d49 ]---
>>>>>>>>>> [   16.486758] RIP: 0010:kfree+0x4d/0x240
>>>>>>>>>>
>>>>>>>>>> <registers values...>
>>>>>>>>>>
>>>>>>>>>> fish: “rmmod vimc” terminated by signal SIGSEGV (Address boundary
>>>>>>>>>> error)
>>>>>>>>>>
>>>>>>>>>> I just added the module after booting, no other action was made.
>>>>>>>>>> Here is
>>>>>>>>>> how my `git log --oneline` looks like:
>>>>>>>>>>
>>>>>>>>>> 897d708e922b media: vimc: Fix gpf in rmmod path when stream is active
>>>>>>>>>> 2e4a5ad8ad6d media: vimc: Collapse component structure into a single
>>>>>>>>>> monolithic driver
>>>>>>>>>> 7c8da1687e92 media: vimc: move private defines to a common header
>>>>>>>>>> 97299a303532 media: Remove dev_err() usage after platform_get_irq()
>>>>>>>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to adv7511-v4l2
>>>>>>>
>>>>>>> I couldn't reproduce the error, my tree looks the same:
>>>>>>>
>>>>>>> [I] koike@...ko ~/m/o/linux> git log --oneline
>>>>>>> e3345155c8ed (HEAD) media: vimc: Fix gpf in rmmod path when stream is
>>>>>>> active
>>>>>>> 43e9e2fe761f media: vimc: Collapse component structure into a single
>>>>>>> monolithic driver
>>>>>>> 8a6d0b9adde0 media: vimc: move private defines to a common header
>>>>>>> 97299a303532 (media/master) media: Remove dev_err() usage after
>>>>>>> platform_get_irq()
>>>>>>> 25a3d6bac6b9 media: adv7511/cobalt: rename driver name to adv7511-v4l2
>>>>>>
>>>>>> Thanks Helen for trying to reproduce and sharing the result.
>>>>>
>>>>> Me and Helen found out what is the problem. If you follow this call trace:
>>>>>
>>>>> vimc_ent_sd_unregister()
>>>>> v4l2_device_unregister_subdev()
>>>>> v4l2_subdev_release()
>>>>>
>>>>> You'll notice that this last function calls the `release` callback
>>>>> implementation of the subdevice. For instance, the `release` of
>>>>> vimc-sensor is this one:
>>>>>
>>>>> static void vimc_sen_release(struct v4l2_subdev *sd)
>>>>> {
>>>>>     struct vimc_sen_device *vsen =
>>>>>                 container_of(sd, struct vimc_sen_device, sd);
>>>>>
>>>>>     v4l2_ctrl_handler_free(&vsen->hdl);
>>>>>     tpg_free(&vsen->tpg);
>>>>>     kfree(vsen);
>>>>> }
>>>>>
>>>>> And then you can see that `vsen` has been freed. Back to
>>>>> vimc_ent_sd_unregister(), after v4l2_device_unregister_subdev(), the
>>>>> function will call vimc_pads_cleanup(). This is basically a
>>>>> kfree(ved->pads), but `ved` has just been freed at
>>>>> v4l2_subdev_release(), producing a memory fault.
>>>>>
>>>>> To fix that, we found two options:
>>>>>
>>>>> - place the kfree(ved->pads) inside the release callback of each
>>>>> subdevice and removing vimc_pads_cleanup() from
>>>>> vimc_ent_sd_unregister()
>>>>> - use a auxiliary variable to hold the address of the pads, for instance:
>>>>>
>>>>> void vimc_ent_sd_unregister(...)
>>>>> {
>>>>>      struct media_pad *pads = ved->pads;
>>>>>      ...
>>>>>      vimc_pads_cleanup(pads);
>>>>> }
>>>>>
>>>>>
>>>>
>>>> I fixed a problem in the thirds patch. vimc-capture uses the first
>>>> approach - placing the kfree(ved->pads) inside the release callback.
>>>>
>>>> I am debugging another such problem in unbind path while streaming.
>>>> I am working on v2 and I will look for the rmmod problem and fix it.
>>>>
>>>> thanks again for testing and finding the root cause.
>>>> -- Shuah
>>>
>>> Hi Andre,
>>>
>>> Here is what's happening.
>>>
>>> Before this change, you can't really do rmmod vimc, because vimc is in
>>> use by other component drivers. With the collapse, now you can actually
>>> do rmmod on vimc and this problem in vimc_ent_sd_unregister() that frees
>>> pads first and the does v4l2_device_unregister_subdev().
>>>
>>> I fixed this in the 3/3 patch. I can reproduce the problem with patches 1 and 2, and patch 3 fixes it.
>>>
>>> Did you test with the third patch in this series?
>>
>> yes, we tested with 3/3, but the new problem now is when doing the following
>> in this order:
>>
>>     v4l2_device_unregister_subdev(sd);
>>     vimc_pads_cleanup(ved->pads);
>>
>>
>> v4l2_device_unregister_subdev() calls the release function of the subdevice that
>> frees the ved object, so ved->pads is not valid anymore. That is why André suggested
>> a temporary variable to hold ved->pads and to be able to free it later:
>>
>>     struct media_pad *pads = ved->pads;
>>
>>     v4l2_device_unregister_subdev(sd);
>>     vimc_pads_cleanup(pads); // So we don't use the ved object here anymore.
> 
> Can't you simply call vimc_pads_cleanup() in the release function of the
> subdevice before freeing the ved object ?
> 

Yes we can, that is the other option Andre suggested.
The  advantage of doing it inside vimc_ent_sd_unregister() is that
who allocated the memory in the first place was vimc_ent_sd_register(), and also,
this is a common code to all subdevs, so letting it in vimc_ent_sd_unregister()
will make sure no subdevs ever forget to free this memory.
But saving the pointer to a variable to free it later is not that pretty
either.

Helen

Powered by blists - more mailing lists