linux-kernel - Re: [PATCH 07/22] arm64: dts: qcom: pm8150: Add pon and rtc nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190814170349.7E4462173E@mail.kernel.org>
Date:   Wed, 14 Aug 2019 10:03:48 -0700
From:   Stephen Boyd <sboyd@...nel.org>
To:     Andy Gross <agross@...nel.org>, Vinod Koul <vkoul@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        sibis@...eaurora.org, Vinod Koul <vkoul@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 07/22] arm64: dts: qcom: pm8150: Add pon and rtc nodes

Quoting Vinod Koul (2019-08-14 05:49:57)
> PM8150 PMIC contains pon and rtc devices so add nodes for these.
> 
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
> ---

Squash this with the other patch?

> @@ -12,6 +13,25 @@
>                 #address-cells = <1>;
>                 #size-cells = <0>;
>  
> +               pon: pon@800 {
> +                       compatible = "qcom,pm8916-pon";
> +                       reg = <0x0800>;
> +                       pwrkey {
> +                               compatible = "qcom,pm8941-pwrkey";
> +                               interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> +                               debounce = <15625>;
> +                               bias-pull-up;
> +                               linux,code = <KEY_POWER>;

status = "disabled"?

> +                       };
> +               };
> +
> +               rtc@...0 {
> +                       compatible = "qcom,pm8941-rtc";
> +                       reg = <0x6000>;
> +                       reg-names = "rtc", "alarm";
> +                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;

status = "disabled"?

> +               };
> +
>                 pm8150_gpios: gpio@...0 {
>                         compatible = "qcom,pm8150-gpio";
>                         reg = <0xc000>;
> -- 
> 2.20.1
>