| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e2a38f24-5a63-ef89-9d69-6a0f2770a9e4@mellanox.com>
Date: Wed, 14 Aug 2019 20:41:02 +0000
From: Mark Bloch <markb@...lanox.com>
To: haiyangz <haiyangz@...rosoft.com>,
"sashal@...nel.org" <sashal@...nel.org>,
"davem@...emloft.net" <davem@...emloft.net>,
Saeed Mahameed <saeedm@...lanox.com>,
"leon@...nel.org" <leon@...nel.org>,
Eran Ben Elisha <eranbe@...lanox.com>,
"lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-hyperv@...r.kernel.org" <linux-hyperv@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
CC: kys <kys@...rosoft.com>,
Stephen Hemminger <sthemmin@...rosoft.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next, 3/6] net/mlx5: Add wrappers for HyperV PCIe
operations
On 8/14/19 12:08 PM, Haiyang Zhang wrote:
> From: Eran Ben Elisha <eranbe@...lanox.com>
>
> Add wrapper functions for HyperV PCIe read / write /
> block_invalidate_register operations. This will be used as an
> infrastructure in the downstream patch for software communication.
>
> This will be enabled by default if CONFIG_PCI_HYPERV_MINI is set.
>
> Signed-off-by: Eran Ben Elisha <eranbe@...lanox.com>
> Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
> ---
> drivers/net/ethernet/mellanox/mlx5/core/Makefile | 1 +
> drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c | 64 ++++++++++++++++++++++++
> drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h | 22 ++++++++
> 3 files changed, 87 insertions(+)
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
> index 8b7edaa..a8950b1 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
> @@ -45,6 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo
> mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
> mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o
> mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o
> +mlx5_core-$(CONFIG_PCI_HYPERV_MINI) += lib/hv.o
>
> #
> # Ipoib netdev
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
> new file mode 100644
> index 0000000..cf08d02
> --- /dev/null
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB
> +// Copyright (c) 2018 Mellanox Technologies
> +
> +#include <linux/hyperv.h>
> +#include "mlx5_core.h"
> +#include "lib/hv.h"
> +
> +static int mlx5_hv_config_common(struct mlx5_core_dev *dev, void *buf, int len,
> + int offset, bool read)
> +{
> + int rc = -EOPNOTSUPP;
> + int bytes_returned;
> + int block_id;
> +
> + if (offset % HV_CONFIG_BLOCK_SIZE_MAX || len % HV_CONFIG_BLOCK_SIZE_MAX)
> + return -EINVAL;
> +
> + block_id = offset / HV_CONFIG_BLOCK_SIZE_MAX;
> +
> + rc = read ?
> + hyperv_read_cfg_blk(dev->pdev, buf,
> + HV_CONFIG_BLOCK_SIZE_MAX, block_id,
> + &bytes_returned) :
> + hyperv_write_cfg_blk(dev->pdev, buf,
> + HV_CONFIG_BLOCK_SIZE_MAX, block_id);
> +
> + /* Make sure len bytes were read successfully */
> + if (read)
> + rc |= !(len == bytes_returned);
> +
> + if (rc) {
> + mlx5_core_err(dev, "Failed to %s hv config, err = %d, len = %d, offset = %d\n",
> + read ? "read" : "write", rc, len,
> + offset);
> + return rc;
> + }
> +
> + return 0;
> +}
This seems out of place why not expose this function as part of hyperv and mlx5
will just pass the pdev.
> +
> +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len,
> + int offset)
> +{
> + return mlx5_hv_config_common(dev, buf, len, offset, true);
> +}
> +
> +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len,
> + int offset)
> +{
> + return mlx5_hv_config_common(dev, buf, len, offset, false);
> +}
> +
> +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context,
> + void (*block_invalidate)(void *context,
> + u64 block_mask))
> +{
> + return hyperv_reg_block_invalidate(dev->pdev, context,
> + block_invalidate);
> +}
> +
> +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev)
> +{
> + hyperv_reg_block_invalidate(dev->pdev, NULL, NULL);
> +}
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
> new file mode 100644
> index 0000000..7f69771
> --- /dev/null
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h
> @@ -0,0 +1,22 @@
> +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */
> +/* Copyright (c) 2019 Mellanox Technologies. */
> +
> +#ifndef __LIB_HV_H__
> +#define __LIB_HV_H__
> +
> +#if IS_ENABLED(CONFIG_PCI_HYPERV_MINI)
> +
> +#include <linux/hyperv.h>
> +#include <linux/mlx5/driver.h>
> +
> +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len,
> + int offset);
> +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len,
> + int offset);
> +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context,
> + void (*block_invalidate)(void *context,
> + u64 block_mask));
> +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev);
> +#endif
> +
> +#endif /* __LIB_HV_H__ */
>
Mark
Powered by blists - more mailing lists