linux-kernel - [PATCH v2 02/15] drm/mxsfb: Read bus flags from bridge if present

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 14 Aug 2019 13:48:38 +0300
From:   Robert Chiras <robert.chiras@....com>
To:     Guido Günther <agx@...xcpu.org>,
        Marek Vasut <marex@...x.de>, Stefan Agner <stefan@...er.ch>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>
Cc:     Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 02/15] drm/mxsfb: Read bus flags from bridge if present

From: Guido Günther <agx@...xcpu.org>

The bridge might have special requirmentes on the input bus. This
is e.g. used by the imx-nwl bridge.

Signed-off-by: Guido Günther <agx@...xcpu.org>
Reviewed-by: Stefan Agner <stefan@...er.ch>
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index de09b93..b69ace8 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -209,7 +209,7 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 {
 	struct drm_device *drm = mxsfb->pipe.crtc.dev;
 	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
-	const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
+	u32 bus_flags = mxsfb->connector->display_info.bus_flags;
 	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
 	int err;
 
@@ -233,6 +233,9 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 
 	clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
 
+	if (mxsfb->bridge && mxsfb->bridge->timings)
+		bus_flags = mxsfb->bridge->timings->input_bus_flags;
+
 	DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
 			     m->crtc_clock,
 			     (int)(clk_get_rate(mxsfb->clk) / 1000));
-- 
2.7.4