[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <DB7PR04MB51958B1AC5911AB59B953D39E2AC0@DB7PR04MB5195.eurprd04.prod.outlook.com>
Date: Thu, 15 Aug 2019 04:47:35 +0000
From: Wen He <wen.he_1@....com>
To: Stephen Boyd <sboyd@...nel.org>,
"linux-clk@...r.kernel.org" <linux-clk@...r.kernel.org>,
"linux-devel@...ux.nxdi.nxp.com" <linux-devel@...ux.nxdi.nxp.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"liviu.dudau@....com" <liviu.dudau@....com>,
Leo Li <leoyang.li@....com>,
Michael Turquette <mturquette@...libre.com>
Subject: RE: [EXT] Re: [v1 1/3] clk: ls1028a: Add clock driver for Display
output interface
> -----Original Message-----
> From: Stephen Boyd <sboyd@...nel.org>
> Sent: 2019年8月15日 1:27
> To: linux-clk@...r.kernel.org; linux-devel@...ux.nxdi.nxp.com;
> linux-kernel@...r.kernel.org; liviu.dudau@....com; Leo Li
> <leoyang.li@....com>; Michael Turquette <mturquette@...libre.com>; Wen
> He <wen.he_1@....com>
> Subject: RE: [EXT] Re: [v1 1/3] clk: ls1028a: Add clock driver for Display output
> interface
>
>
> Quoting Wen He (2019-08-14 02:38:21)
> >
> >
> > > -----Original Message-----
> > > From: Stephen Boyd <sboyd@...nel.org>
> > > Sent: 2019年8月14日 2:25
> > > To: Michael Turquette <mturquette@...libre.com>; Wen He
> > > <wen.he_1@....com>; Leo Li <leoyang.li@....com>;
> > > linux-clk@...r.kernel.org; linux-devel@...ux.nxdi.nxp.com;
> > > linux-kernel@...r.kernel.org; liviu.dudau@....com
> > > Cc: Wen He <wen.he_1@....com>
> > > Subject: [EXT] Re: [v1 1/3] clk: ls1028a: Add clock driver for
> > > Display output interface
> > >
> > >
> > > Quoting Wen He (2019-08-12 03:01:03)
> > > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index
> > > > 801fa1cd0321..0e6c7027d637 100644
> > > > --- a/drivers/clk/Kconfig
> > > > +++ b/drivers/clk/Kconfig
> > > > @@ -223,6 +223,15 @@ config CLK_QORIQ
> > > > This adds the clock driver support for Freescale QorIQ
> platforms
> > > > using common clock framework.
> > > >
> > > > +config CLK_PLLDIG
> > > > + bool "Clock driver for LS1028A Display output"
> > > > + depends on ARCH_LAYERSCAPE && OF
> > >
> > > Does it actually depend on either of these to build? Probabl not, so
> > > maybe just default ARCH_LAYERSCAPE && OF? Also, can your Kconfig
> > > variable be named something more specific like CLK_LS1028A_PLLDIG?
> >
> > Actually it also depends Display modules, but we allow building
> > display drivers as modules, so is here whether need add Display
> > modules depend and also allow clock driver building to a module?
> > Would it be better to reduce the number of the modules insert, I think
> > the clock driver should be long available for the system.
>
> I'm asking if it actually requires ARCH_LAYERSCAPE or OF to successfully
> compile the file. Is that true? I don't see any asm/ includes or anything that's
> going to fail if either of these configs aren't enabled.
> So it seems safe to change this to
>
> depends on ARCH_LAYERSCAPE || COMPILE_TEST
> default ARCH_LAYERSCAPE
>
> so that it's compiled by default on this architecture and is available to be
> compile tested by various test builders.
Understand, Will send next patch version.
Best Regards,
Wen
>
> >
> > looks like great if named Kconfig variable to 'CLK_LS1028A_PLLDIG'.
> >
> > >
Powered by blists - more mailing lists