[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190815114719.GI5011@pendragon.ideasonboard.com>
Date: Thu, 15 Aug 2019 14:47:19 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Fabrizio Castro <fabrizio.castro@...renesas.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Sam Ravnborg <sam@...nborg.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Simon Horman <horms@...ge.net.au>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Jacopo Mondi <jacopo+renesas@...ndi.org>
Subject: Re: [PATCH v2 2/9] dt-bindings: display: Add bindings for Advantech
IDK-2121WR
Hi Fabrizio,
On Thu, Aug 15, 2019 at 12:04:26PM +0100, Fabrizio Castro wrote:
> This panel is handled through the generic lvds-panel bindings,
> so only needs its additional compatible specified.
>
> Some panel-specific documentation can be found here:
> https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@...renesas.com>
>
> ---
> v1->v2:
> * Reworked according to Laurent's feedback
> * Renamed lvds0_panel_in to panel_in0
> * Renamed lvds1_panel_in to panel_in1
>
> Laurent,
>
> Should this be a .yaml file already?
It's not a strict requirement, but I'm sure Rob would really appreciate.
I've converted a DT binding to yaml recently (for a panel too), and I
have to say I'm impressed by the validation yaml brings, both for DT
sources and for DT bindings. It even validates the example in the
bindings, which is great. Documentation/devicetree/writing-schema.md
should give you a few pointers to get started (in particular make sure
you run make dt_binding_check for your new bindings).
> .../display/panel/advantech,idk-2121wr.txt | 56 ++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> new file mode 100644
> index 0000000..6ee1d1b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> @@ -0,0 +1,56 @@
> +Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
> +===============================================
> +
> +Required properties:
> +- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
> +
> +This binding is compatible with the lvds-panel binding, which is specified
> +in panel-lvds.txt in this directory.
> +The panel operates in dual-link mode and thus requires two port nodes,
> +the first port node expects odd pixels (1, 3, 5, etc.) and the second port
> +expects even pixels (0, 2, 4, etc.).
> +
> +Example
> +-------
> +
> + panel {
> + compatible = "advantech,idk-2121wr", "panel-lvds";
> +
> + width-mm = <476>;
> + height-mm = <268>;
> +
> + data-mapping = "vesa-24";
> +
> + panel-timing {
> + clock-frequency = <148500000>;
> + hactive = <1920>;
> + vactive = <1080>;
> + hsync-len = <44>;
> + hfront-porch = <88>;
> + hback-porch = <148>;
> + vfront-porch = <4>;
> + vback-porch = <36>;
> + vsync-len = <5>;
> + };
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + /* Odd pixels */
> + reg = <0>;
> + panel_in0: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> +
> + port@1 {
> + /* Even pixels */
> + reg = <1>;
> + panel_in1: endpoint {
> + remote-endpoint = <&lvds1_out>;
> + };
> + };
> + };
> + };
> --
> 2.7.4
>
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists