| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190815175440.GW5011@pendragon.ideasonboard.com>
Date: Thu, 15 Aug 2019 20:54:40 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Helen Koike <helen.koike@...labora.com>
Cc: Sakari Ailus <sakari.ailus@....fi>,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
eddie.cai.linux@...il.com, mchehab@...nel.org, heiko@...ech.de,
jacob2.chen@...k-chips.com, jeffy.chen@...k-chips.com,
zyc@...k-chips.com, linux-kernel@...r.kernel.org,
tfiga@...omium.org, hans.verkuil@...co.com,
sakari.ailus@...ux.intel.com, kernel@...labora.com,
ezequiel@...labora.com, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, zhengsq@...k-chips.com
Subject: Re: [PATCH v8 04/14] media: rkisp1: add Rockchip MIPI Synopsys DPHY
driver
Hi Helen,
Thank you for the patch.
On Wed, Aug 07, 2019 at 10:37:55AM -0300, Helen Koike wrote:
> On 8/7/19 10:05 AM, Sakari Ailus wrote:
> > On Tue, Jul 30, 2019 at 03:42:46PM -0300, Helen Koike wrote:
> >> From: Jacob Chen <jacob2.chen@...k-chips.com>
> >>
> >> This commit adds a subdev driver for Rockchip MIPI Synopsys DPHY driver
> >>
> >> Signed-off-by: Jacob Chen <jacob2.chen@...k-chips.com>
> >> Signed-off-by: Shunqian Zheng <zhengsq@...k-chips.com>
> >> Signed-off-by: Tomasz Figa <tfiga@...omium.org>
> >> [migrate to phy framework]
> >> Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
> >> [update for upstream]
> >> Signed-off-by: Helen Koike <helen.koike@...labora.com>
> >>
> >> ---
> >>
> >> Changes in v8:
> >> - Remove boiler plate license text
> >>
> >> Changes in v7:
> >> - Migrate dphy specific code from
> >> drivers/media/platform/rockchip/isp1/mipi_dphy_sy.c
> >> to drivers/phy/rockchip/phy-rockchip-dphy.c
> >> - Drop support for rk3288
> >> - Drop support for dphy txrx
> >> - code styling and checkpatch fixes
> >>
> >> drivers/phy/rockchip/Kconfig | 8 +
> >> drivers/phy/rockchip/Makefile | 1 +
> >> drivers/phy/rockchip/phy-rockchip-dphy.c | 408 +++++++++++++++++++++++
> >> 3 files changed, 417 insertions(+)
> >> create mode 100644 drivers/phy/rockchip/phy-rockchip-dphy.c
> >>
> >> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> >> index c454c90cd99e..afd072f135e6 100644
> >> --- a/drivers/phy/rockchip/Kconfig
> >> +++ b/drivers/phy/rockchip/Kconfig
> >> @@ -9,6 +9,14 @@ config PHY_ROCKCHIP_DP
> >> help
> >> Enable this to support the Rockchip Display Port PHY.
> >>
> >> +config PHY_ROCKCHIP_DPHY
> >> + tristate "Rockchip MIPI Synopsys DPHY driver"
How much of this PHY is Rockchip-specific ? Would it make sense to turn
it into a Synopsys DPHY driver, with some Rockchip glue ? I suppose this
could always be done later, if needed (and I also suppose there's no
existing driver in drivers/phy/ that support the same Synopsys IP).
> >> + depends on ARCH_ROCKCHIP && OF
> >
> > How about (...) || COMPILE_TEST ?
> >
> >> + select GENERIC_PHY_MIPI_DPHY
> >> + select GENERIC_PHY
> >> + help
> >> + Enable this to support the Rockchip MIPI Synopsys DPHY.
> >> +
> >> config PHY_ROCKCHIP_EMMC
> >> tristate "Rockchip EMMC PHY Driver"
> >> depends on ARCH_ROCKCHIP && OF
> >> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> >> index fd21cbaf40dd..f62e9010bcaf 100644
> >> --- a/drivers/phy/rockchip/Makefile
> >> +++ b/drivers/phy/rockchip/Makefile
> >> @@ -1,5 +1,6 @@
> >> # SPDX-License-Identifier: GPL-2.0
> >> obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> >> +obj-$(CONFIG_PHY_ROCKCHIP_DPHY) += phy-rockchip-dphy.o
> >> obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o
> >> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
> >> diff --git a/drivers/phy/rockchip/phy-rockchip-dphy.c b/drivers/phy/rockchip/phy-rockchip-dphy.c
> >> new file mode 100644
> >> index 000000000000..3a29976c2dff
> >> --- /dev/null
> >> +++ b/drivers/phy/rockchip/phy-rockchip-dphy.c
> >> @@ -0,0 +1,408 @@
> >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> >> +/*
> >> + * Rockchip MIPI Synopsys DPHY driver
> >> + *
> >> + * Based on:
> >> + *
> >> + * Copyright (C) 2016 FuZhou Rockchip Co., Ltd.
> >> + * Author: Yakir Yang <ykk@@rock-chips.com>
> >> + */
> >> +
> >> +#include <linux/clk.h>
> >> +#include <linux/io.h>
> >> +#include <linux/mfd/syscon.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/phy/phy.h>
> >> +#include <linux/phy/phy-mipi-dphy.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/regmap.h>
> >> +
> >> +#define RK3399_GRF_SOC_CON9 0x6224
> >> +#define RK3399_GRF_SOC_CON21 0x6254
> >> +#define RK3399_GRF_SOC_CON22 0x6258
> >> +#define RK3399_GRF_SOC_CON23 0x625c
> >> +#define RK3399_GRF_SOC_CON24 0x6260
> >> +#define RK3399_GRF_SOC_CON25 0x6264
> >> +#define RK3399_GRF_SOC_STATUS1 0xe2a4
> >> +
> >> +#define CLOCK_LANE_HS_RX_CONTROL 0x34
> >> +#define LANE0_HS_RX_CONTROL 0x44
> >> +#define LANE1_HS_RX_CONTROL 0x54
> >> +#define LANE2_HS_RX_CONTROL 0x84
> >> +#define LANE3_HS_RX_CONTROL 0x94
> >> +#define HS_RX_DATA_LANES_THS_SETTLE_CONTROL 0x75
> >> +
> >> +#define MAX_DPHY_CLK 8
> >> +
> >> +#define PHY_TESTEN_ADDR (0x1 << 16)
> >> +#define PHY_TESTEN_DATA (0x0 << 16)
> >> +#define PHY_TESTCLK (0x1 << 1)
> >> +#define PHY_TESTCLR (0x1 << 0)
Maybe s/0x// for the previous four lines ?
> >> +#define THS_SETTLE_COUNTER_THRESHOLD 0x04
> >> +
> >> +#define HIWORD_UPDATE(val, mask, shift) \
> >> + ((val) << (shift) | (mask) << ((shift) + 16))
As you use this in a single place, I would inline it, possibly with a
small comment that explains what's happening.
> >> +
> >> +#define GRF_SOC_CON12 0x0274
> >> +
> >> +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
> >> +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
> >> +
> >> +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
> >> +#define GRF_EDP_PHY_SIDDQ_ON 0
> >> +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
I would recommend aligning the value of of all macros in the same way.
> >> +
> >> +struct hsfreq_range {
> >> + u32 range_h;
The structure would be more compact if you turned this into a u16.
> >> + u8 cfg_bit;
> >> +};
> >> +
> >> +static const struct hsfreq_range rk3399_mipidphy_hsfreq_ranges[] = {
> >> + { 89, 0x00}, { 99, 0x10}, { 109, 0x20}, { 129, 0x01},
> >> + { 139, 0x11}, { 149, 0x21}, { 169, 0x02}, { 179, 0x12},
> >> + { 199, 0x22}, { 219, 0x03}, { 239, 0x13}, { 249, 0x23},
> >> + { 269, 0x04}, { 299, 0x14}, { 329, 0x05}, { 359, 0x15},
> >> + { 399, 0x25}, { 449, 0x06}, { 499, 0x16}, { 549, 0x07},
> >> + { 599, 0x17}, { 649, 0x08}, { 699, 0x18}, { 749, 0x09},
> >> + { 799, 0x19}, { 849, 0x29}, { 899, 0x39}, { 949, 0x0a},
> >> + { 999, 0x1a}, {1049, 0x2a}, {1099, 0x3a}, {1149, 0x0b},
> >> + {1199, 0x1b}, {1249, 0x2b}, {1299, 0x3b}, {1349, 0x0c},
> >> + {1399, 0x1c}, {1449, 0x2c}, {1500, 0x3c}
Maybe s/{/{ / and s/}/ }/ to give it a bit more air ? :-)
> >> +};
> >> +
> >> +static const char * const rk3399_mipidphy_clks[] = {
> >> + "dphy-ref",
> >> + "dphy-cfg",
> >> + "grf",
> >> +};
> >> +
> >> +enum dphy_reg_id {
> >> + GRF_DPHY_RX0_TURNDISABLE = 0,
> >> + GRF_DPHY_RX0_FORCERXMODE,
> >> + GRF_DPHY_RX0_FORCETXSTOPMODE,
> >> + GRF_DPHY_RX0_ENABLE,
> >> + GRF_DPHY_RX0_TESTCLR,
> >> + GRF_DPHY_RX0_TESTCLK,
> >> + GRF_DPHY_RX0_TESTEN,
> >> + GRF_DPHY_RX0_TESTDIN,
> >> + GRF_DPHY_RX0_TURNREQUEST,
> >> + GRF_DPHY_RX0_TESTDOUT,
> >> + GRF_DPHY_TX0_TURNDISABLE,
> >> + GRF_DPHY_TX0_FORCERXMODE,
> >> + GRF_DPHY_TX0_FORCETXSTOPMODE,
> >> + GRF_DPHY_TX0_TURNREQUEST,
> >> + GRF_DPHY_TX1RX1_TURNDISABLE,
> >> + GRF_DPHY_TX1RX1_FORCERXMODE,
> >> + GRF_DPHY_TX1RX1_FORCETXSTOPMODE,
> >> + GRF_DPHY_TX1RX1_ENABLE,
> >> + GRF_DPHY_TX1RX1_MASTERSLAVEZ,
> >> + GRF_DPHY_TX1RX1_BASEDIR,
> >> + GRF_DPHY_TX1RX1_ENABLECLK,
> >> + GRF_DPHY_TX1RX1_TURNREQUEST,
> >> + GRF_DPHY_RX1_SRC_SEL,
> >> + /* rk3288 only */
> >> + GRF_CON_DISABLE_ISP,
> >> + GRF_CON_ISP_DPHY_SEL,
> >> + GRF_DSI_CSI_TESTBUS_SEL,
> >> + GRF_DVP_V18SEL,
> >> + /* below is for rk3399 only */
> >> + GRF_DPHY_RX0_CLK_INV_SEL,
> >> + GRF_DPHY_RX1_CLK_INV_SEL,
> >> +};
> >> +
> >> +struct dphy_reg {
> >> + u32 offset;
> >> + u32 mask;
> >> + u32 shift;
The offset should hold in 16 bits and the mask and shift in 8 bits. That
would save space in the table below.
> >> +};
> >> +
> >> +#define PHY_REG(_offset, _width, _shift) \
> >> + { .offset = _offset, .mask = BIT(_width) - 1, .shift = _shift, }
> >> +
> >> +static const struct dphy_reg rk3399_grf_dphy_regs[] = {
> >> + [GRF_DPHY_RX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON9, 4, 0),
> >> + [GRF_DPHY_RX0_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 10),
> >> + [GRF_DPHY_RX1_CLK_INV_SEL] = PHY_REG(RK3399_GRF_SOC_CON9, 1, 11),
> >> + [GRF_DPHY_RX0_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 0),
> >> + [GRF_DPHY_RX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 4),
> >> + [GRF_DPHY_RX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 8),
> >> + [GRF_DPHY_RX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON21, 4, 12),
> >> + [GRF_DPHY_TX0_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 0),
> >> + [GRF_DPHY_TX0_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 4),
> >> + [GRF_DPHY_TX0_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 8),
> >> + [GRF_DPHY_TX0_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON22, 4, 12),
> >> + [GRF_DPHY_TX1RX1_ENABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 0),
> >> + [GRF_DPHY_TX1RX1_FORCERXMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 4),
> >> + [GRF_DPHY_TX1RX1_FORCETXSTOPMODE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 8),
> >> + [GRF_DPHY_TX1RX1_TURNDISABLE] = PHY_REG(RK3399_GRF_SOC_CON23, 4, 12),
> >> + [GRF_DPHY_TX1RX1_TURNREQUEST] = PHY_REG(RK3399_GRF_SOC_CON24, 4, 0),
> >> + [GRF_DPHY_RX1_SRC_SEL] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 4),
> >> + [GRF_DPHY_TX1RX1_BASEDIR] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 5),
> >> + [GRF_DPHY_TX1RX1_ENABLECLK] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 6),
> >> + [GRF_DPHY_TX1RX1_MASTERSLAVEZ] = PHY_REG(RK3399_GRF_SOC_CON24, 1, 7),
> >> + [GRF_DPHY_RX0_TESTDIN] = PHY_REG(RK3399_GRF_SOC_CON25, 8, 0),
> >> + [GRF_DPHY_RX0_TESTEN] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 8),
> >> + [GRF_DPHY_RX0_TESTCLK] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 9),
> >> + [GRF_DPHY_RX0_TESTCLR] = PHY_REG(RK3399_GRF_SOC_CON25, 1, 10),
> >> + [GRF_DPHY_RX0_TESTDOUT] = PHY_REG(RK3399_GRF_SOC_STATUS1, 8, 0),
The annoying part with such an indirection is that you can't really
write multiple fields in a single register with a single operation. Is
the register mapping completely different between the rk3288 and the
rk3399, or are the fields grouped in registers in a similar way ? In the
latter case we could possibly optimise it.
> >> +};
> >> +
> >> +struct dphy_drv_data {
> >> + const char * const *clks;
> >> + int num_clks;
This is never negative, you can make it an unsigned int.
> >> + const struct hsfreq_range *hsfreq_ranges;
> >> + int num_hsfreq_ranges;
Same here.
> >> + const struct dphy_reg *regs;
> >> +};
> >> +
> >> +struct rockchip_dphy {
> >> + struct device *dev;
> >> + struct regmap *grf;
> >> + const struct dphy_reg *grf_regs;
> >> + struct clk_bulk_data clks[MAX_DPHY_CLK];
> >> +
> >> + const struct dphy_drv_data *drv_data;
> >> + struct phy_configure_opts_mipi_dphy config;
> >> +};
> >> +
> >> +static inline void write_grf_reg(struct rockchip_dphy *priv,
> >> + int index, u8 value)
Maybe unsigned int index ?
> >> +{
> >> + const struct dphy_reg *reg = &priv->grf_regs[index];
> >> + unsigned int val = HIWORD_UPDATE(value, reg->mask, reg->shift);
> >> +
> >> + WARN_ON(!reg->offset);
> >> + regmap_write(priv->grf, reg->offset, val);
> >> +}
> >> +
> >> +static void mipidphy0_wr_reg(struct rockchip_dphy *priv,
> >> + u8 test_code, u8 test_data)
Function (and structure) names have different prefixes, would it make
sense to standardise them ? Maybe rockchip_dphy_ ? Or rk_dphy_ for a
shorter version ? This could become rk_dphy_write_dphy(), and the
previous function rk_dphy_write_grf().
> >> +{
> >> + /*
> >> + * With the falling edge on TESTCLK, the TESTDIN[7:0] signal content
> >> + * is latched internally as the current test code. Test data is
> >> + * programmed internally by rising edge on TESTCLK.
> >> + */
I've never understood why PHYs tend to have a register named TEST that
contains way more than test data :-)
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTDIN, test_code);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTEN, 1);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 0);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTEN, 0);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTDIN, test_data);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> >> +}
> >> +
> >> +/* should be move to power_on */
s/move/moved/
Do you mean merging the two functions together ? What prevents from
doing so ?
> >> +static int mipidphy_rx_stream_on(struct rockchip_dphy *priv)
> >> +{
> >> + const struct dphy_drv_data *drv_data = priv->drv_data;
> >> + const struct hsfreq_range *hsfreq_ranges = drv_data->hsfreq_ranges;
> >> + struct phy_configure_opts_mipi_dphy *config = &priv->config;
> >> + unsigned int i, hsfreq = 0, data_rate_mbps = config->hs_clk_rate;
> >> + int num_hsfreq_ranges = drv_data->num_hsfreq_ranges;
> >> +
> >> + do_div(data_rate_mbps, 1000 * 1000);
> >> +
> >> + dev_dbg(priv->dev, "%s: lanes %d - data_rate_mbps %u\n",
> >> + __func__, config->lanes, data_rate_mbps);
> >> +
> >> + for (i = 0; i < num_hsfreq_ranges; i++) {
> >> + if (hsfreq_ranges[i].range_h >= data_rate_mbps) {
> >> + hsfreq = hsfreq_ranges[i].cfg_bit;
> >> + break;
> >> + }
> >> + }
As num_hsfreq_ranges and hsfreq_ranges are only used in this loop, I
would remove the local variables.
> >> +
> >> + write_grf_reg(priv, GRF_DPHY_RX0_FORCERXMODE, 0);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_FORCETXSTOPMODE, 0);
> >> +
> >> + /* Disable lan turn around, which is ignored in receive mode */
Is it "lan turn around", or "lane turn around" ?
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TURNREQUEST, 0);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TURNDISABLE, 0xf);
> >> +
> >> + write_grf_reg(priv, GRF_DPHY_RX0_ENABLE, GENMASK(config->lanes - 1, 0));
> >> +
> >> + /* dphy start */
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLK, 1);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLR, 1);
> >> + usleep_range(100, 150);
> >> + write_grf_reg(priv, GRF_DPHY_RX0_TESTCLR, 0);
> >> + usleep_range(100, 150);
> >> +
> >> + /* set clock lane */
> >> + /* HS hsfreq_range & lane 0 settle bypass */
> >> + mipidphy0_wr_reg(priv, CLOCK_LANE_HS_RX_CONTROL, 0);
> >> + /* HS RX Control of lane0 */
> >> + mipidphy0_wr_reg(priv, LANE0_HS_RX_CONTROL, hsfreq << 1);
> >> + /* HS RX Control of lane1 */
> >> + mipidphy0_wr_reg(priv, LANE1_HS_RX_CONTROL, 0);
> >> + /* HS RX Control of lane2 */
> >> + mipidphy0_wr_reg(priv, LANE2_HS_RX_CONTROL, 0);
> >> + /* HS RX Control of lane3 */
> >> + mipidphy0_wr_reg(priv, LANE3_HS_RX_CONTROL, 0);
Does this hardcode usage of a single lane ?
> >> + /* HS RX Data Lanes Settle State Time Control */
> >> + mipidphy0_wr_reg(priv, HS_RX_DATA_LANES_THS_SETTLE_CONTROL,
> >> + THS_SETTLE_COUNTER_THRESHOLD);
> >> +
> >> + /* Normal operation */
> >> + mipidphy0_wr_reg(priv, 0x0, 0);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int rockchip_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
> >> +{
> >> + struct rockchip_dphy *priv = phy_get_drvdata(phy);
> >> + int ret;
> >> +
> >> + /* pass with phy_mipi_dphy_get_default_config (with pixel rate?) */
I'm not sure to understand what this means.
> >> + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + memcpy(&priv->config, opts, sizeof(priv->config));
> >
> > You could to:
> >
> > priv->config = *opts;
> >
> > Up to you. Some people like memcpy(). :-)
>
> your way is better thanks!
>
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int rockchip_dphy_power_on(struct phy *phy)
> >> +{
> >> + struct rockchip_dphy *priv = phy_get_drvdata(phy);
> >> + int ret;
> >> +
> >> + ret = clk_bulk_enable(priv->drv_data->num_clks, priv->clks);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + return mipidphy_rx_stream_on(priv);
Should you call clk_bulk_disable() if mipidphy_rx_stream_on() fails ?
Actually that function never fails, so I'd make it a void function, and
return 0 here.
What happens if the clock rate is higher than the maximum supported by
the PHY ? Shouldn't rockchip_dphy_configure() fail in that case ?
> >> +}
> >> +
> >> +static int rockchip_dphy_power_off(struct phy *phy)
> >> +{
> >> + struct rockchip_dphy *priv = phy_get_drvdata(phy);
> >> +
No need to write any register ? That's scary, what will happen on the
next power on, when the clocks gets enabled ?
> >> + clk_bulk_disable(priv->drv_data->num_clks, priv->clks);
> >> + return 0;
> >> +}
> >> +
> >> +static int rockchip_dphy_init(struct phy *phy)
> >> +{
> >> + struct rockchip_dphy *priv = phy_get_drvdata(phy);
> >> + int ret;
> >> +
> >> + ret = clk_bulk_prepare(priv->drv_data->num_clks, priv->clks);
> >
> > return ...;
> >
> >> + if (ret)
> >> + return ret;
> >> + return 0;
> >> +}
> >> +
> >> +static int rockchip_dphy_exit(struct phy *phy)
> >> +{
> >> + struct rockchip_dphy *priv = phy_get_drvdata(phy);
> >> +
> >> + clk_bulk_unprepare(priv->drv_data->num_clks, priv->clks);
> >> + return 0;
> >> +}
> >> +
> >> +static const struct phy_ops rockchip_dphy_ops = {
> >> + .power_on = rockchip_dphy_power_on,
> >> + .power_off = rockchip_dphy_power_off,
> >> + .init = rockchip_dphy_init,
> >> + .exit = rockchip_dphy_exit,
> >> + .configure = rockchip_dphy_configure,
> >> + .owner = THIS_MODULE,
> >> +};
> >> +
> >> +static const struct dphy_drv_data rk3399_mipidphy_drv_data = {
> >> + .clks = rk3399_mipidphy_clks,
> >> + .num_clks = ARRAY_SIZE(rk3399_mipidphy_clks),
> >> + .hsfreq_ranges = rk3399_mipidphy_hsfreq_ranges,
> >> + .num_hsfreq_ranges = ARRAY_SIZE(rk3399_mipidphy_hsfreq_ranges),
> >> + .regs = rk3399_grf_dphy_regs,
> >
> > Do you expect to support more of the similar PHY(s) --- are there such? If
> > not, you could put these in the code that uses them.
>
> Yes, for rk3288 in the future.
>
> >> +};
> >> +
> >> +static const struct of_device_id rockchip_dphy_dt_ids[] = {
> >> + {
> >> + .compatible = "rockchip,rk3399-mipi-dphy",
> >> + .data = &rk3399_mipidphy_drv_data,
> >> + },
> >> + {}
> >> +};
> >> +MODULE_DEVICE_TABLE(of, rockchip_dphy_dt_ids);
> >> +
> >> +static int rockchip_dphy_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct device_node *np = dev->of_node;
> >> + const struct dphy_drv_data *drv_data;
> >> + struct phy_provider *phy_provider;
> >> + const struct of_device_id *of_id;
> >> + struct rockchip_dphy *priv;
> >> + struct regmap *grf;
> >> + struct phy *phy;
> >> + unsigned int i;
> >> + int ret;
> >> +
> >> + if (!dev->parent || !dev->parent->of_node)
> >> + return -ENODEV;
> >> +
> >> + if (platform_get_resource(pdev, IORESOURCE_MEM, 0)) {
> >> + dev_err(&pdev->dev, "Rockchip DPHY driver only suports rx\n");
You can replace pdev->dev with dev here and below.
s/rx/RX mode/ ?
> >> + return -EINVAL;
> >> + }
> >> +
> >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> >> + if (!priv)
> >> + return -ENOMEM;
> >> + priv->dev = dev;
> >> +
> >> + grf = syscon_node_to_regmap(dev->parent->of_node);
> >> + if (IS_ERR(grf)) {
> >> + grf = syscon_regmap_lookup_by_phandle(dev->of_node,
> >> + "rockchip,grf");
> >> + if (IS_ERR(grf)) {
> >> + dev_err(dev, "Can't find GRF syscon\n");
> >> + return -ENODEV;
> >> + }
> >> + }
> >> + priv->grf = grf;
> >> +
> >> + of_id = of_match_device(rockchip_dphy_dt_ids, dev);
> >> + if (!of_id)
> >> + return -EINVAL;
> >> +
> >> + drv_data = of_id->data;
> >> + priv->grf_regs = drv_data->regs;
Do you have to store grf_regs in priv, or could it be accessed through
priv->drv_data->regs ?
> >> + priv->drv_data = drv_data;
> >> + for (i = 0; i < drv_data->num_clks; i++)
> >> + priv->clks[i].id = drv_data->clks[i];
> >> + ret = devm_clk_bulk_get(&pdev->dev, drv_data->num_clks, priv->clks);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + phy = devm_phy_create(dev, np, &rockchip_dphy_ops);
> >> + if (IS_ERR(phy)) {
> >> + dev_err(dev, "failed to create phy\n");
> >> + return PTR_ERR(phy);
> >> + }
> >> + phy_set_drvdata(phy, priv);
> >> +
> >> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> >> +
> >> + return PTR_ERR_OR_ZERO(phy_provider);
> >> +}
> >> +
> >> +static struct platform_driver rockchip_dphy_driver = {
> >> + .probe = rockchip_dphy_probe,
> >> + .driver = {
> >> + .name = "rockchip-mipi-dphy",
> >> + .of_match_table = rockchip_dphy_dt_ids,
> >> + },
> >> +};
> >> +module_platform_driver(rockchip_dphy_driver);
> >> +
> >> +MODULE_AUTHOR("Ezequiel Garcia <ezequiel@...labora.com>");
> >> +MODULE_DESCRIPTION("Rockchip MIPI Synopsys DPHY driver");
> >> +MODULE_LICENSE("Dual MIT/GPL");
Overall this is quite good, there are only small issues.
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists