lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190816213648.GA10244@bogus>
Date:   Fri, 16 Aug 2019 16:36:48 -0500
From:   Rob Herring <robh@...nel.org>
To:     Amit Kucheria <amit.kucheria@...aro.org>
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        andy.gross@...aro.org, Andy Gross <agross@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Zhang Rui <rui.zhang@...el.com>, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH 07/15] dt: thermal: tsens: Document interrupt support in
 tsens driver

On Fri, Jul 26, 2019 at 03:48:42AM +0530, Amit Kucheria wrote:
> Define two new required properties to define interrupts and
> interrupt-names for tsens.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> index 673cc1831ee9..3d3dd5dc6d36 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -22,6 +22,8 @@ Required properties:
>  
>  - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
>  - #qcom,sensors: Number of sensors in tsens block
> +- interrupts: Interrupts generated from Always-On subsystem (AOSS)
> +- interrupt-names: The name of the interrupt e.g. "tsens0", "tsens1"

How many interrupts? A name with just indices isn't too useful.

>  - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
>  nvmem cells
>  
> @@ -40,6 +42,9 @@ tsens0: thermal-sensor@...3000 {
>  		reg = <0xc263000 0x1ff>, /* TM */
>  			<0xc222000 0x1ff>; /* SROT */
>  		#qcom,sensors = <13>;
> +		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "tsens0";
> +
>  		#thermal-sensor-cells = <1>;
>  	};
>  
> -- 
> 2.17.1
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ