| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190816083902.19659-1-jiada_wang@mentor.com>
Date: Fri, 16 Aug 2019 17:38:59 +0900
From: Jiada Wang <jiada_wang@...tor.com>
To: <nick@...anahar.org>, <dmitry.torokhov@...il.com>
CC: <linux-input@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<jiada_wang@...tor.com>, <george_davis@...tor.com>
Subject: [PATCH v1 60/63] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data
From: Naveen Chakka <Naveen.Chakka@...bosch.com>
Atmel touch controller contains T38 object where a user can store its own
data of length 64 bytes. T38 data will not be part of checksum
calculation on executing T6 BACKUP command.
format used to update the T38 data is given below:
<offset> <length> <actual_data>
offset: offset address of the data to be written in the t38 object
(in decimal)
length: length of the data to be written into the t38 object(in decimal)
data: actual data bytes to be written into the t38 object
(values should be in hex)
Ex:
1. 0 2 10 20
updates first two bytes of the t38 data with values 10 and 20
2. 19 6 10 2f 30 4a 50 60
updates 6 bytes of t38 data from the index 19-24 with hex values
Signed-off-by: Naveen Chakka <Naveen.Chakka@...bosch.com>
Signed-off-by: Sanjeev Chugh <sanjeev_chugh@...tor.com>
Signed-off-by: George G. Davis <george_davis@...tor.com>
Signed-off-by: Jiada Wang <jiada_wang@...tor.com>
---
drivers/input/touchscreen/atmel_mxt_ts.c | 104 ++++++++++++++++++++++-
1 file changed, 102 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 8e95f46a30d7..fd9a96ec3fd3 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -3024,8 +3024,6 @@ static void mxt_watchdog_timer(struct timer_list *t)
{
struct mxt_data *data = from_timer(data, t, watchdog_timer);
- dev_dbg(&data->client->dev, "%s: Timer triggered\n", __func__);
-
if (!work_pending(&data->watchdog_work)) {
if (!data->mxt_status.intp_triggered)
schedule_work(&data->watchdog_work);
@@ -4095,6 +4093,106 @@ static ssize_t mxt_touch_device_status(struct device *dev, struct
return ret;
}
+static ssize_t mxt_t38_data_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_object *object;
+ size_t count = 0, size;
+ u8 i, *t38_buf;
+
+ if (!data->object_table)
+ return -ENXIO;
+
+ object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+ size = mxt_obj_size(object);
+
+ /* Pre-allocate buffer large enough to hold max size of t38 object.*/
+ t38_buf = kmalloc(size, GFP_KERNEL);
+ if (!t38_buf)
+ return -ENOMEM;
+
+ count = __mxt_read_reg(data->client, object->start_address,
+ size, t38_buf);
+ if (count)
+ goto end;
+
+ for (i = 0; i < size; i++)
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "[%2u]: %02x\n", i, t38_buf[i]);
+ count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+end:
+ kfree(t38_buf);
+ return count;
+}
+
+static ssize_t mxt_t38_data_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_object *object;
+ ssize_t ret = 0, pos, offset;
+ unsigned int i, len, index;
+ u8 *t38_buf;
+
+ if (!data->object_table)
+ return -ENXIO;
+
+ object = mxt_get_object(data, MXT_SPT_USERDATA_T38);
+
+ /* Pre-allocate buffer large enough to hold max size of t38 object.*/
+ t38_buf = kmalloc(mxt_obj_size(object), GFP_KERNEL);
+ if (!t38_buf)
+ return -ENOMEM;
+
+ ret = sscanf(buf, "%zd %d%zd", &offset, &len, &pos);
+ if (ret != 2) {
+ dev_err(dev, "Bad format: Invalid parameter to update t38\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ if (len == 0) {
+ dev_err(dev,
+ "Bad format: Data length should not be equal to 0\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ if (offset < 0 || ((offset + len) > 64)) {
+ dev_err(dev, "Invalid offset value to update t38\n");
+ ret = -EINVAL;
+ goto end;
+ }
+
+ index = pos;
+ for (i = 0; i < len; i++) {
+ ret = sscanf(buf + index, "%hhx%zd", t38_buf + i, &pos);
+ if (ret != 1) {
+ dev_err(dev, "Bad format: Invalid Data\n");
+ ret = -EINVAL;
+ goto end;
+ }
+ index += pos;
+ }
+
+ ret = __mxt_write_reg(data->client, object->start_address + offset,
+ len, t38_buf);
+ if (ret)
+ goto end;
+
+ ret = mxt_t6_command(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE,
+ true);
+ if (ret)
+ dev_err(dev, "backup command failed\n");
+ else
+ ret = count;
+end:
+ kfree(t38_buf);
+ return ret;
+}
+
static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
@@ -4107,6 +4205,7 @@ static DEVICE_ATTR(debug_v2_enable, S_IWUSR | S_IRUSR, NULL,
static DEVICE_ATTR(debug_notify, S_IRUGO, mxt_debug_notify_show, NULL);
static DEVICE_ATTR(t25, 0600, mxt_t25_selftest_show, mxt_t25_selftest_store);
static DEVICE_ATTR(touch_dev_stat, 0444, mxt_touch_device_status, NULL);
+static DEVICE_ATTR(t38_data, 0600, mxt_t38_data_show, mxt_t38_data_store);
static struct attribute *mxt_attrs[] = {
&dev_attr_fw_version.attr,
@@ -4119,6 +4218,7 @@ static struct attribute *mxt_attrs[] = {
&dev_attr_debug_notify.attr,
&dev_attr_t25.attr,
&dev_attr_touch_dev_stat.attr,
+ &dev_attr_t38_data.attr,
NULL
};
--
2.19.2
Powered by blists - more mailing lists