linux-kernel - Re: wifi on Motorola Droid 4 in 5.3-rc2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOf5uwmprKDNd-6C0xigdV5ZdkGOquwoXcMVbteK9XNE+sKqSA@mail.gmail.com>
Date:   Sun, 18 Aug 2019 14:45:03 +0200
From:   Michael Nazzareno Trimarchi <michael@...rulasolutions.com>
To:     Pavel Machek <pavel@....cz>
Cc:     kernel list <linux-kernel@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
        Tony Lindgren <tony@...mide.com>,
        Sebastian Reichel <sre@...nel.org>, nekit1000@...il.com,
        mpartap@....net, Merlijn Wajer <merlijn@...zup.org>,
        "open list:TI WILINK WIRELES..." <linux-wireless@...r.kernel.org>
Subject: Re: wifi on Motorola Droid 4 in 5.3-rc2

Hi Pavel

For the second part

On Sun, Aug 18, 2019 at 12:46 PM Pavel Machek <pavel@....cz> wrote:
>
> Hi!
>
> First, I guess I should mention that this is first time I'm attempting
> to get wifi going on D4.
>
> I'm getting this:
>
> user@...uan:~/g/ofono$ sudo ifconfig wlan0 down
> user@...uan:~/g/ofono$ sudo ifconfig wlan0 up
> user@...uan:~/g/ofono$ sudo iwlist wlan0 scan
> wlan0     Interface doesn't support scanning.
>
> user@...uan:~/g/ofono$ sudo ifconfig wlan0 down
> user@...uan:~/g/ofono$ sudo iwlist wlan0 scan
> wlan0     Interface doesn't support scanning.
>
> user@...uan:~/g/ofono$
>
> I'm getting this warning during bootup:
>
> [   13.733703] asoc-audio-graph-card soundcard: No GPIO consumer pa
> found
> [   14.279724] wlcore: WARNING Detected unconfigured mac address in
> nvs, derive from fuse instead.

This is ok. It means that your nvs file is not the original one taken
from android

> [   14.293273] wlcore: WARNING Your device performance is not
> optimized.

you can use plt command with calibrate

Michael

> [   14.304443] wlcore: WARNING Please use the calibrator tool to
> configure your device.
> [   14.317474] wlcore: loaded
> [   16.977325] motmdm serial0-0: motmdm_dlci_send_command: AT+VERSION=
> got MASERATIBP_N_05.25.00R,026.0R,XSAMASR01VRZNA026.0R,???
>
> Any ideas?
>
> Best regards,
>                                                                         Pavel
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |