| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190819085816.GI5999@X250>
Date: Mon, 19 Aug 2019 10:58:17 +0200
From: Shawn Guo <shawnguo@...nel.org>
To: Stefan-gabriel Mirea <stefan-gabriel.mirea@....com>
Cc: "corbet@....net" <corbet@....net>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"catalin.marinas@....com" <catalin.marinas@....com>,
"will@...nel.org" <will@...nel.org>, Leo Li <leoyang.li@....com>,
"jslaby@...e.com" <jslaby@...e.com>,
"linux-doc@...r.kernel.org" <linux-doc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Cosmin Stefan Stoica <cosmin.stoica@....com>,
Dan Nica <dan.nica@....com>,
Larisa Ileana Grigore <larisa.grigore@....com>
Subject: Re: [PATCH v2 3/6] arm64: dts: fsl: Add device tree for S32V234-EVB
On Fri, Aug 09, 2019 at 11:29:12AM +0000, Stefan-gabriel Mirea wrote:
> From: Stoica Cosmin-Stefan <cosmin.stoica@....com>
>
> Add initial version of device tree for S32V234-EVB, including nodes for the
> 4 Cortex-A53 cores, AIPS bus with UART modules, ARM architected timer and
> Generic Interrupt Controller (GIC).
>
> Keep SoC level separate from board level to let future boards with this SoC
> share common properties, while the dts files will keep board-dependent
> properties.
>
> Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@....com>
> Signed-off-by: Mihaela Martinas <Mihaela.Martinas@...escale.com>
> Signed-off-by: Dan Nica <dan.nica@....com>
> Signed-off-by: Larisa Grigore <Larisa.Grigore@....com>
> Signed-off-by: Phu Luu An <phu.luuan@....com>
> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 +
> .../boot/dts/freescale/fsl-s32v234-evb.dts | 24 ++++
The 'fsl-' prefix can be saved here, so that we can distinguish three
families by starting string: imx??? for i.MX, fsl-??? for LayerScape,
and s32??? for S32.
> .../arm64/boot/dts/freescale/fsl-s32v234.dtsi | 130 ++++++++++++++++++
> 3 files changed, 156 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index c043aca66572..3af29b58a833 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -26,3 +26,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
> +
> +dtb-$(CONFIG_ARCH_S32) += fsl-s32v234-evb.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts b/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
> new file mode 100644
> index 000000000000..92bf6c5563a3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-s32v234-evb.dts
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2015-2016 Freescale Semiconductor, Inc.
> + * Copyright 2016-2017 NXP
> + */
> +
> +/dts-v1/;
> +#include "fsl-s32v234.dtsi"
> +
> +/ {
> + compatible = "fsl,s32v234-evb", "fsl,s32v234";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi b/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
> new file mode 100644
> index 000000000000..6d686d3ba997
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-s32v234.dtsi
> @@ -0,0 +1,130 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2015-2016 Freescale Semiconductor, Inc.
> + * Copyright 2016-2018 NXP
> + */
> +
> +/memreserve/ 0x80000000 0x00010000;
> +
> +/ {
> + model = "Freescale S32V234";
The 'model' is usually used in board level DTS to describe the board.
> + compatible = "fsl,s32v234";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x0>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x80000000>;
> + next-level-cache = <&cluster0_l2_cache>;
> + };
Please have a newline between nodes.
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x1>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x80000000>;
> + next-level-cache = <&cluster0_l2_cache>;
> + };
> + cpu2: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x100>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x80000000>;
> + next-level-cache = <&cluster1_l2_cache>;
> + };
> + cpu3: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x101>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x80000000>;
> + next-level-cache = <&cluster1_l2_cache>;
> + };
> +
> + cluster0_l2_cache: l2-cache0 {
> + compatible = "cache";
> + };
> +
> + cluster1_l2_cache: l2-cache1 {
> + compatible = "cache";
> + };
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges;
> +
> + aips0: aips-bus@...00000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + reg = <0x0 0x40000000 0x0 0x7D000>;
> + ranges;
> +
> + uart0: serial@...53000 {
> + compatible = "fsl,s32-linflexuart";
> + reg = <0x0 0x40053000 0x0 0x1000>;
> + interrupts = <0 59 1>;
Please use GIC_SPI and IRQ_TYPE_xxx defines to make it more readable.
> + status = "disabled";
> + };
> + };
> +
> + aips1: aips-bus@...80000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + interrupt-parent = <&gic>;
> + reg = <0x0 0x40080000 0x0 0x70000>;
> + ranges;
> +
> + uart1: serial@...bc000 {
> + compatible = "fsl,s32-linflexuart";
> + reg = <0x0 0x400bc000 0x0 0x1000>;
> + interrupts = <0 60 1>;
> + status = "disabled";
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xf08>,
> + <1 14 0xf08>,
> + <1 11 0xf08>,
> + <1 10 0xf08>;
> + /* clock-frequency might be modified by u-boot, depending on the
> + * chip version.
> + */
> + clock-frequency = <10000000>;
> + };
> +
> + gic: interrupt-controller@...01000 {
> + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0 0x7d001000 0 0x1000>,
> + <0 0x7d002000 0 0x2000>,
> + <0 0x7d004000 0 0x2000>,
> + <0 0x7d006000 0 0x2000>;
> + interrupts = <1 9 0xf04>;
> + };
We usually put these core platform devices prior to 'soc' node.
Shawn
> +};
> --
> 2.22.0
>
Powered by blists - more mailing lists