[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190819101238.17335-1-niklas.cassel@linaro.org>
Date: Mon, 19 Aug 2019 12:12:38 +0200
From: Niklas Cassel <niklas.cassel@...aro.org>
To: Andy Gross <agross@...nel.org>, Viresh Kumar <vireshk@...nel.org>,
Nishanth Menon <nm@...com>, Stephen Boyd <sboyd@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, jorge.ramirez-ortiz@...aro.org,
bjorn.andersson@...aro.org, ulf.hansson@...aro.org,
Niklas Cassel <niklas.cassel@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 09/14] dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
Add qcom-opp bindings with properties needed for Core Power Reduction
(CPR).
CPR is included in a great variety of Qualcomm SoCs, e.g. msm8916 and
msm8996. CPR was first introduced in msm8974.
Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@...aro.org>
---
Changes since V2:
qcom,opp-fuse-level is really a required property and not an optional
property, so properly define it as such.
.../devicetree/bindings/opp/qcom-opp.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
new file mode 100644
index 000000000000..32eb0793c7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -0,0 +1,19 @@
+Qualcomm OPP bindings to describe OPP nodes
+
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt
+Additional properties are described below.
+
+* OPP Table Node
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+ "operating-points-v2-qcom-level"
+
+* OPP Node
+
+Required properties:
+- qcom,opp-fuse-level: A positive value representing the fuse corner/level
+ associated with this OPP node. Sometimes several corners/levels shares
+ a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
+ min uV, and max uV.
--
2.21.0
Powered by blists - more mailing lists