lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190819130143.18778-1-manivannan.sadhasivam@linaro.org>
Date:   Mon, 19 Aug 2019 18:31:35 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     sboyd@...nel.org, mturquette@...libre.com, robh+dt@...nel.org
Cc:     linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        haitao.suo@...main.com, darren.tsao@...main.com,
        fisher.cheng@...main.com, alec.lin@...main.com,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v3 0/8] Add Bitmain BM1880 clock driver

Hello,

This patchset adds common clock driver for Bitmain BM1880 SoC clock
controller. The clock controller consists of gate, divider, mux
and pll clocks with different compositions. Hence, the driver uses
composite clock structure in place where multiple clocking units are
combined together.

This patchset also removes UART fixed clock and sources clocks from clock
controller for Sophon Edge board where the driver has been validated.

Thanks,
Mani

Changes in v3:

* Switched to clk_hw_{register/unregister} APIs
* Returned clk_hw from the in-driver registration helpers

Changes in v2:

* Converted the dt binding to YAML
* Incorporated review comments from Stephen (majority of change is switching
  to new way of specifying clk parents)

Manivannan Sadhasivam (8):
  clk: Zero init clk_init_data in helpers
  clk: Warn if clk_init_data is not zero initialized
  clk: Add clk_hw_unregister_composite helper function definition
  dt-bindings: clock: Add devicetree binding for BM1880 SoC
  arm64: dts: bitmain: Add clock controller support for BM1880 SoC
  arm64: dts: bitmain: Source common clock for UART controllers
  clk: Add common clock driver for BM1880 SoC
  MAINTAINERS: Add entry for BM1880 SoC clock driver

 .../bindings/clock/bitmain,bm1880-clk.yaml    |  83 ++
 MAINTAINERS                                   |   2 +
 .../boot/dts/bitmain/bm1880-sophon-edge.dts   |   9 -
 arch/arm64/boot/dts/bitmain/bm1880.dtsi       |  28 +
 drivers/clk/Kconfig                           |   6 +
 drivers/clk/Makefile                          |   1 +
 drivers/clk/clk-bm1880.c                      | 966 ++++++++++++++++++
 drivers/clk/clk-composite.c                   |  13 +-
 drivers/clk/clk-divider.c                     |   2 +-
 drivers/clk/clk-fixed-rate.c                  |   2 +-
 drivers/clk/clk-gate.c                        |   2 +-
 drivers/clk/clk-mux.c                         |   2 +-
 drivers/clk/clk.c                             |   8 +
 include/dt-bindings/clock/bm1880-clock.h      |  82 ++
 14 files changed, 1192 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
 create mode 100644 drivers/clk/clk-bm1880.c
 create mode 100644 include/dt-bindings/clock/bm1880-clock.h

-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ