[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1jlfvnomly.fsf@starbuckisacylon.baylibre.com>
Date: Tue, 20 Aug 2019 17:58:01 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Philipp Zabel <p.zabel@...gutronix.de>
Cc: Kevin Hilman <khilman@...libre.com>,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] reset: meson-audio-arb: add sm1 support
On Tue 20 Aug 2019 at 17:39, Philipp Zabel <p.zabel@...gutronix.de> wrote:
> Hi Jerome,
>
> thank you for the patch. Just one nitpick and one real issue below:
>
> On Tue, 2019-08-20 at 11:46 +0200, Jerome Brunet wrote:
>> Add the new arb reset lines of the SM1 SoC family
>>
>> Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
>> ---
>> drivers/reset/reset-meson-audio-arb.c | 28 ++++++++++++++++++++++++---
>> 1 file changed, 25 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/reset/reset-meson-audio-arb.c b/drivers/reset/reset-meson-audio-arb.c
>> index c53a2185a039..72d29dbca45a 100644
>> --- a/drivers/reset/reset-meson-audio-arb.c
>> +++ b/drivers/reset/reset-meson-audio-arb.c
>> @@ -30,6 +30,17 @@ static const unsigned int axg_audio_arb_reset_bits[] = {
>> [AXG_ARB_FRDDR_C] = 6,
>> };
>>
>> +static const unsigned int sm1_audio_arb_reset_bits[] = {
>> + [AXG_ARB_TODDR_A] = 0,
>> + [AXG_ARB_TODDR_B] = 1,
>> + [AXG_ARB_TODDR_C] = 2,
>> + [AXG_ARB_FRDDR_A] = 4,
>> + [AXG_ARB_FRDDR_B] = 5,
>> + [AXG_ARB_FRDDR_C] = 6,
>> + [AXG_ARB_TODDR_D] = 3,
>> + [AXG_ARB_FRDDR_D] = 7,
>> +};
>> +
>> static int meson_audio_arb_update(struct reset_controller_dev *rcdev,
>> unsigned long id, bool assert)
>> {
>> @@ -82,8 +93,14 @@ static const struct reset_control_ops meson_audio_arb_rstc_ops = {
>> };
>>
>> static const struct of_device_id meson_audio_arb_of_match[] = {
>> - { .compatible = "amlogic,meson-axg-audio-arb", },
>> - {}
>> + {
>> + .compatible = "amlogic,meson-axg-audio-arb",
>> + .data = axg_audio_arb_reset_bits,
>> + },
>> + {
>> + .compatible = "amlogic,meson-sm1-audio-arb",
>> + .data = sm1_audio_arb_reset_bits
>> + }, {}
>
> Only slight preference, I would keep the sentinel on a separate line.
> Your choice.
Agreed.
>
>> };
>> MODULE_DEVICE_TABLE(of, meson_audio_arb_of_match);
>>
>> @@ -104,10 +121,15 @@ static int meson_audio_arb_remove(struct platform_device *pdev)
>> static int meson_audio_arb_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> + const unsigned int *data;
>> struct meson_audio_arb_data *arb;
>> struct resource *res;
>> int ret;
>>
>> + data = of_device_get_match_data(dev);
>> + if (!data)
>> + return -EINVAL;
>> +
>> arb = devm_kzalloc(dev, sizeof(*arb), GFP_KERNEL);
>> if (!arb)
>> return -ENOMEM;
>> @@ -126,7 +148,7 @@ static int meson_audio_arb_probe(struct platform_device *pdev)
>> return PTR_ERR(arb->regs);
>>
>> spin_lock_init(&arb->lock);
>> - arb->reset_bits = axg_audio_arb_reset_bits;
>> + arb->reset_bits = data;
>> arb->rstc.nr_resets = ARRAY_SIZE(axg_audio_arb_reset_bits);
>
> Since SM1 has two more resets, this needs to come from device match data
> as well, or the last two resets will be unusable.
Absolutely. Sorry about that.
We are still a bit early in process of adding the support for this SoC.
I'll wait until I can do more complete tests to send a v2.
>
>> arb->rstc.ops = &meson_audio_arb_rstc_ops;
>> arb->rstc.of_node = dev->of_node;
>
> regards
> Philipp
Powered by blists - more mailing lists