| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190821174619.21935-1-nhuck@google.com>
Date: Wed, 21 Aug 2019 10:46:19 -0700
From: Nathan Huckleberry <nhuck@...gle.com>
To: linux@...linux.org.uk
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
clang-built-linux@...glegroups.com, miles.chen@...iatek.com,
ndesaulniers@...gle.com, Nathan Huckleberry <nhuck@...gle.com>,
Tri Vo <trong@...gle.com>
Subject: [PATCH v2] ARM: UNWINDER_FRAME_POINTER implementation for Clang
The stackframe setup when compiled with clang is different.
Since the stack unwinder expects the gcc stackframe setup it
fails to print backtraces. This patch adds support for the
clang stackframe setup.
Link: https://github.com/ClangBuiltLinux/linux/issues/35
Cc: clang-built-linux@...glegroups.com
Suggested-by: Tri Vo <trong@...gle.com>
Signed-off-by: Nathan Huckleberry <nhuck@...gle.com>
---
Changes from v1->v2
* Fix indentation in various files
* Swap spaces for tabs
* Rename Ldsi to Lopcode
* Remove unused Ldsi entry
arch/arm/Kconfig.debug | 2 +-
arch/arm/Makefile | 5 +-
arch/arm/lib/Makefile | 8 +-
arch/arm/lib/backtrace-clang.S | 229 +++++++++++++++++++++++++++++++++
4 files changed, 241 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/lib/backtrace-clang.S
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85710e078afb..b9c674ec19e0 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -56,7 +56,7 @@ choice
config UNWINDER_FRAME_POINTER
bool "Frame pointer unwinder"
- depends on !THUMB2_KERNEL && !CC_IS_CLANG
+ depends on !THUMB2_KERNEL
select ARCH_WANT_FRAME_POINTERS
select FRAME_POINTER
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c3624ca6c0bc..6f251c201db0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -36,7 +36,10 @@ KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access)
endif
ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
+KBUILD_CFLAGS +=-fno-omit-frame-pointer
+ifeq ($(CONFIG_CC_IS_GCC),y)
+KBUILD_CFLAGS += -mapcs -mno-sched-prolog
+endif
endif
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index b25c54585048..6d2ba454f25b 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -5,7 +5,7 @@
# Copyright (C) 1995-2000 Russell King
#
-lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
+lib-y := changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
delay.o delay-loop.o findbit.o memchr.o memcpy.o \
memmove.o memset.o setbit.o \
@@ -19,6 +19,12 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
mmu-y := clear_user.o copy_page.o getuser.o putuser.o \
copy_from_user.o copy_to_user.o
+ifdef CONFIG_CC_IS_CLANG
+ lib-y += backtrace-clang.o
+else
+ lib-y += backtrace.o
+endif
+
# using lib_ here won't override already available weak symbols
obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
new file mode 100644
index 000000000000..6f2a8a57d0fb
--- /dev/null
+++ b/arch/arm/lib/backtrace-clang.S
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm/lib/backtrace-clang.S
+ *
+ * Copyright (C) 2019 Nathan Huckleberry
+ *
+ */
+#include <linux/kern_levels.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+ .text
+
+/* fp is 0 or stack frame */
+
+#define frame r4
+#define sv_fp r5
+#define sv_pc r6
+#define mask r7
+#define sv_lr r8
+
+ENTRY(c_backtrace)
+
+#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
+ ret lr
+ENDPROC(c_backtrace)
+#else
+
+
+/*
+ * Clang does not store pc or sp in function prologues
+ * so we don't know exactly where the function
+ * starts.
+ *
+ * We can treat the current frame's lr as the saved pc and the
+ * preceding frame's lr as the current frame's lr,
+ * but we can't trace the most recent call.
+ * Inserting a false stack frame allows us to reference the
+ * function called last in the stacktrace.
+ *
+ * If the call instruction was a bl we can look at the callers
+ * branch instruction to calculate the saved pc.
+ * We can recover the pc in most cases, but in cases such as
+ * calling function pointers we cannot. In this
+ * case, default to using the lr. This will be
+ * some address in the function, but will not
+ * be the function start.
+ *
+ * Unfortunately due to the stack frame layout we can't dump
+ * r0 - r3, but these are less frequently saved.
+ *
+ * Stack frame layout:
+ * <larger addresses>
+ * saved lr
+ * frame=> saved fp
+ * optionally saved caller registers (r4 - r10)
+ * optionally saved arguments (r0 - r3)
+ * <top of stack frame>
+ * <smaller addresses>
+ *
+ * Functions start with the following code sequence:
+ * corrected pc => stmfd sp!, {..., fp, lr}
+ * add fp, sp, #x
+ * stmfd sp!, {r0 - r3} (optional)
+ *
+ *
+ *
+ *
+ *
+ *
+ * The diagram below shows an example stack setup
+ * for dump_stack.
+ *
+ * The frame for c_backtrace has pointers to the
+ * code of dump_stack. This is why the frame of
+ * c_backtrace is used to for the pc calculation
+ * of dump_stack. This is why we must move back
+ * a frame to print dump_stack.
+ *
+ * The stored locals for dump_stack are in dump_stack's
+ * frame. This means that to fully print dump_stack's frame
+ * we need both the frame for dump_stack (for locals) and the
+ * frame that was called by dump_stack (for pc).
+ *
+ * To print locals we must know where the function start is. If
+ * we read the function prologue opcodes we can determine
+ * which variables are stored in the stack frame.
+ *
+ * To find the function start of dump_stack we can look at the
+ * stored LR of show_stack. It points at the instruction
+ * directly after the bl dump_stack. We can then read the
+ * offset from the bl opcode to determine where the branch takes us.
+ * The address calculated must be the start of dump_stack.
+ *
+ * c_backtrace frame dump_stack:
+ * {[LR] } ============| ...
+ * {[FP] } =======| | bl c_backtrace
+ * | |=> ...
+ * {[R4-R10]} |
+ * {[R0-R3] } | show_stack:
+ * dump_stack frame | ...
+ * {[LR] } =============| bl dump_stack
+ * {[FP] } <=======| |=> ...
+ * {[R4-R10]}
+ * {[R0-R3] }
+ */
+
+stmfd sp!, {r4 - r9, fp, lr} @ Save an extra register
+ @ to ensure 8 byte alignment
+movs frame, r0 @ if frame pointer is zero
+beq no_frame @ we have no stack frames
+
+tst r1, #0x10 @ 26 or 32-bit mode?
+moveq mask, #0xfc000003
+movne mask, #0 @ mask for 32-bit
+
+/*
+ * Switches the current frame to be the frame for dump_stack.
+ */
+ add frame, sp, #24 @ switch to false frame
+for_each_frame: tst frame, mask @ Check for address exceptions
+ bne no_frame
+
+/*
+ * sv_fp is the stack frame with the locals for the current considered
+ * function.
+ *
+ * sv_pc is the saved lr frame the frame above. This is a pointer to a
+ * code address within the current considered function, but
+ * it is not the function start. This value gets updated to be
+ * the function start later if it is possible.
+ */
+1001: ldr sv_pc, [frame, #4] @ get saved 'pc'
+1002: ldr sv_fp, [frame, #0] @ get saved fp
+
+ teq sv_fp, mask @ make sure next frame exists
+ beq no_frame
+
+/*
+ * sv_lr is the lr from the function that called the current function. This
+ * is a pointer to a code address in the current function's caller.
+ * sv_lr-4 is the instruction used to call the current function.
+ *
+ * This sv_lr can be used to calculate the function start if the function
+ * was called using a bl instruction. If the function start
+ * can be recovered sv_pc is overwritten with the function start.
+ *
+ * If the current function was called using a function pointer we cannot
+ * recover the function start and instead continue with sv_pc as
+ * an arbitrary value within the current function. If this is the case
+ * we cannot print registers for the current function, but the stacktrace
+ * is still printed properly.
+ */
+1003: ldr sv_lr, [sv_fp, #4] @ get saved lr from next frame
+
+ ldr r0, [sv_lr, #-4] @ get call instruction
+ ldr r3, .Lopcode+4
+ and r2, r3, r0 @ is this a bl call
+ teq r2, r3
+ bne finished_setup @ give up if it's not
+ and r0, #0xffffff @ get call offset 24-bit int
+ lsl r0, r0, #8 @ sign extend offset
+ asr r0, r0, #8
+ ldr sv_pc, [sv_fp, #4] @ get lr address
+ add sv_pc, sv_pc, #-4 @ get call instruction address
+ add sv_pc, sv_pc, #8 @ take care of prefetch
+ add sv_pc, sv_pc, r0, lsl #2@ find function start
+
+finished_setup:
+
+ bic sv_pc, sv_pc, mask @ mask PC/LR for the mode
+
+/*
+ * Print the function (sv_pc) and where it was called
+ * from (sv_lr).
+ */
+1004: mov r0, sv_pc
+
+ mov r1, sv_lr
+ mov r2, frame
+ bic r1, r1, mask @ mask PC/LR for the mode
+ bl dump_backtrace_entry
+
+/*
+ * Test if the function start is a stmfd instruction
+ * to determine which registers were stored in the function
+ * prologue.
+ *
+ * If we could not recover the sv_pc because we were called through
+ * a function pointer the comparison will fail and no registers
+ * will print.
+ */
+1005: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, lr}
+ ldr r3, .Lopcode @ instruction exists,
+ teq r3, r1, lsr #11
+ ldr r0, [frame] @ locals are stored in
+ @ the preceding frame
+ subeq r0, r0, #4
+ bleq dump_backtrace_stm @ dump saved registers
+
+/*
+ * If we are out of frames or if the next frame is invalid.
+ */
+ teq sv_fp, #0 @ zero saved fp means
+ beq no_frame @ no further frames
+
+ cmp sv_fp, frame @ next frame must be
+ mov frame, sv_fp @ above the current frame
+ bhi for_each_frame
+
+1006: adr r0, .Lbad
+ mov r1, frame
+ bl printk
+no_frame: ldmfd sp!, {r4 - r9, fp, pc}
+ENDPROC(c_backtrace)
+ .pushsection __ex_table,"a"
+ .align 3
+ .long 1001b, 1006b
+ .long 1002b, 1006b
+ .long 1003b, 1006b
+ .long 1004b, 1006b
+ .long 1005b, 1006b
+ .popsection
+
+.Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n"
+ .align
+.Lopcode: .word 0xe92d4800 >> 11 @ stmfd sp!, {... fp, lr}
+ .word 0x0b000000 @ bl if these bits are set
+
+#endif
--
2.23.0.rc1.153.gdeed80330f-goog
Powered by blists - more mailing lists